Produkty dla a dodatki (316)

Gantry design For machining of largest and heaviest workpieces Droop+Rein offers a floor guided gantry machine line. Best accessibility and utilisation of floor space for largest workpieces combined with highest flexibility in size and configuration. Cross rail, moveable (GS) or fixed (GFS) Economic machining of largest components – flexible, dynamic and precise Floor space savings compared to table moving machines In line with the modular principle – various controls, table configurations, milling head/spindles and tool changer configurations Length:mm 3,000 – 30,000 Width:mm 2,000 – 3,000 X-axis:mm 4,000 – 31,000 Y-axis:mm 3,000 – 4,000 Z-axis:mm 1,500 W-axis:mm 1,250 C-axis:mm ± 400 X-axis:m/min 30 Y-axis:m/min 40 Z-axis:m/min 30 W-axis:m/min 4 C-axis:°/min 4,320 Power S1/S6:kW 40/60 Torque S1/S6:Nm 1,100/1,800 Speed:rpm 4,000-6,000

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 7,000 Table diameter:mm 5,000 / 6,000 Y-axis:mm +/- 3,500 Working height max:mm 6,350 Main drive S1:kW 2x 60 - 2x 150

Gauges / Thermometers and Accessories - Safety bourdon tube pressure gauge

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 2,300 Turning diameter:mm 2,100 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,570 Machining height moveable crossrail:mm 1,120 / 1,560 / 2,000 Moveable crossrail stroke:mm 800 / 1,000 Step moveable crossrail:mm 100 Table diameter:mm 1,600 Table speed:rpm 320 Table drive power S1 100%:kW 51 / 71 / 100 Table torque S1 100%:kW/Nm 25 / 31.8 / 32.4 Table load max.:kg 15,000 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,900 Twin-pallet Pallet diameter:mm 1,600 Twin-pallet Swing diameter:mm 2,000 Front pallet Pallet diameter:mm 1,600 Front pallet Swing diameter:mm 2,300 Load on pallet:kg 5,000

Efficient high performance machining requires a rugged machine buildup without weakness. All technical parameters such as axis strokes, forces, torques and accelerations are set according to application requirements. The design of the STC X series has no bottleneck reducing the maximum possible material removal rates. With its design, unmatched productivity is possible. The STC X machine enhancement is ever ongoing. The goal is to continuously increase the customer benefits, i. e. increase productivity, increase accuracy or expand the application options. Pallet clamping surface according to DIN 55201:mm 800x800 (800x1000 / 1000x1000) Max. workpiece weight:kg 3000 Column linear travel X:mm 1700 Main spindle vertical travel Y:mm 1600 (1900) Table traverse travel Z:mm 1950 Swing diameter:mm 2000 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 (10) Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 42 Space requirement for basic machine LxWxH:mm 9500x7800x4550

These fouraxis horizontal machining centres are spacesaving miracles, but they remain true to our stringent quality standards in every respect. They guarantee maximum precision for your work processes thanks to our guiding values of accuracy and rigidity. These are values embodied by Heckert machining centres throughout their decadeslong history on the market. X / Y / Z travel mm:850/1020/1000 Rapid traverse m/min:80 X/Y/Z acceleration:6/10/7 Chip-to-chip time sec:3.1 Tool holder:HSK-A100 Max. tool length mm:600 Max. tool diameter mm:340 Pallet dimension mm:500 x 630 Time required to change pallets sec:13 Workpiece core contour ø in mm:900 Extended workpiece contour ø in mm:1,100 Max. workpiece height mm:1,050 Loading mass kg:1,500 Machine length mm:7,950 Machine width mm:3,300

Measurement and Accessories - Gas measuring valve GMV

The LX series was specifically designed for the highprecision, efficient fiveaxis machining of turbine blades. This ultramodern machining platform is the result of decades of experience in the development of machine tools, CAM systems and special tools combined with our inhouse expertise in the prototype and series production of turbine blades. Max. distance between centers mm:1805 Swing Diameter mm:650 X-Axis mm:1800 Y-Axis mm:660 Z-Axis mm:600 A-Axis (Root Station) degree:360 endless A-Axis (Tip Station) degree:360 endless Swivel B-Axis degree:+/- 87 Linear Axes X Y Z U/min:50 Rotary Axis A U/min:200 Rotary Axis B U/min:60 Linear Axes P mm:0.009 Linear Axes Ps mm:0.0028 Rotary Axes P sec:6.0 Rotary Axes Ps sec:4.0 Power at 100% Duty kW:28 Torque at 100% Duty Nm:181 Speed U/min:18000 Tool Taper:HSK-A63 Max. Tool Weight kg:6.5 Max. Tool Diameter mm:150 Max. Tool Length mm:250 Standard / Max. number of Tools:24 / 62 Tool Chance Time sec:8 Max. Workpiece Diameter mm:NA Total weight (part and fixture) kg:NA Workpiece Change Time sec:NA Weight kg:32000 Lenght x Width x Height mm:10400 x 5920 x 3500 Safety Concept:CE-compliant Siemens 840D:Siemens 840D

The RVU grinding machines set new standards in highprecision machining and are especially suitable for high precision grinding applications in the bearing and aerospace industries. The range can be equipped with up to four watercooled grinding spindles which can achieve a performance of 45 kW at 18,000 rev/min. (according to the type of grinding wheel selected) The RVU facilitates a complete machining processing without interruption as optional dressing units, grinding wheel changers and workpiece measurement are available. Additional options for hard metal machining boring and workpiece measurement increase the possible applications of the machine series considerably. Swing diameter:mm 1,800 Grinding diameter:mm 1,600 Height under grinding wheel thickness 100 mm:mm 500 / 800 Standard table diameter:mm 1,600 Table speed:rpm 120 Table load:kg 4,000 Carriages:1 Grinding ram stroke:mm 800 / 1,000 Feed force:kN 10 X- and Y-axis speed max.:mm/min 10,000 Spindle-holder tilt:degree - 5° + 275° Tilt lead:degree 1° (Hirth) Power (conv. GW) (S1):kW 7 à 45 Speed (conv. GW):rpm 4,000 à 12,000 Power (CBN wheels) (S1):kW 15 / 25 Speed (CBN wheels):rpm 8,000 / 18,000 GW diameter (conv. or CBN) max.:mm 150 / 300 / 400 / 500 Wheel thickness max.:mm 50 / 100 / 190 Wheel-holder clamping taper face:x Surface grinding spindle (conv. GW) (S1):kW 25 Spindle speed:rpm 5,000 Wheel diameter max.:mm 400 / 500 Electropermanent magnetic chuck No. of poles / slots width:mm 32 / 10H10

The SIP SPC Series not only provides the user with the ultimate in precision but also with tried and tested sophisticated automation. Investment in SIP technology produces returns, thanks to aboveaverage longterm precision and many years of durability. Pallet clamping surface mm:1 250 Workpiece interference area diameter (mm) mm:940 / 1 250 Maximum workpiece weight kg:800 Maximum feed X / Y / Z m/min:40 Maximum number of tool slots:320 Length x Width x Height mm:4 550 x 7 760 x 4 150

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 1,400 Turning diameter:mm 1,250 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,130 Machining height moveable crossrail:mm 1,120 / 1,560 Moveable crossrail stroke:mm 800 Step moveable crossrail:mm 100 Table diameter:mm 800 Table speed:rpm 800 Table drive power S1 100%:kW 51 / 71 Table torque S1 100%:kW/Nm 10.6 / 13.5 Table load max.:kg 3,500 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,000 Twin-pallet Pallet diameter:mm 800 Twin-pallet Swing diameter:mm 1,250 Lateral pallet Pallet diameter:mm 1,000 Lateral pallet Swing diameter:mm 1,350 Front pallet Pallet diameter:mm 800 Front pallet Swing diameter:mm 1,400 Load on pallet:kg 2,000

Finishing centers for the jewelry industries, the machines range s210/ s220 combine several processes such as Milling, Engraving, Drilling and Faceting to produce parts for the most demanding key players of the jewelry crafts worldwide. His legendary finishing qualities best fit the requirements in terms of accuracy and ease of use. Features 6 to 8Axis Faceting, engraving, drilling, milling 2 spindles with changer and tool magazine High frequency 45.000min1 spindle Easy changeover of the programs CNC control unit Siemens 840Di Voltage:3x400 V /50 Hz Control voltage:24 V DC Installed power:7,5 kVA 15A Air pressure:bar min 5 (max 10) Weight:kg 1200 CNC control unit:Siemens 840 Di Engraving software:CAD-CAM/Vision numeric Horizontal Spindle:10000 min-1 Vertical spindle s220:HF 45000 min-1 Angular displacement D-shaped surface A:° 180 Dividing device B:° 360 Drum for angular positioning C:° s210: 225 / s220: 180 Linear displacement X:mm s210: 25 / s220: 41 Linear displacement Y:mm s210: 80 / s220: 41 Vertical displacement milling head Z:mm s210: 150 / s220: 133 Manual Q axis:mm s210: 45 / s220: 33 Manual RB axis:mm s210: 20 / s220: 20 SP axis:° s210: 360 / s220: SP1/SP2 360 Tool holder:Automatic diamond tool revolver 6 positions Magazine:s210: manual / s220: Tool magazine 8 positions Clamping:s220: Pneumatic clamping and unclamping system Optical:Centering microscope device Tool holder:Ø 30mm D-Shaped ring until radius of 5mm Code reader:Bar code reader integration / programs record Machine (without any options):kg s210: 1000 / s220: 1300

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 1,400 Turning diameter:mm 1,250 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,130 Machining height moveable crossrail:mm 1,120 / 1,560 Moveable crossrail stroke:mm 800 Step moveable crossrail:mm 100 Table diameter:mm 800 Table speed:rpm 800 Table drive power S1 100%:kW 51 / 71 Table torque S1 100%:kW/Nm 10.6 / 13.5 Table load max.:kg 3,500 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,000 Twin-pallet Pallet diameter:mm 800 Twin-pallet Swing diameter:mm 1,250 Lateral pallet Pallet diameter:mm 800 Lateral pallet Swing diameter:mm 1,350 Front pallet Pallet diameter:mm 800 Front pallet Swing diameter:mm 1,400 Load on pallet:kg 2,000

Flexibility, efficiency and precision play a very important role for machine manufacturers and tool builders, especially when dealing with large components. These three requirements led to the development of the gantry machining centre TS/TFS NEO with a fixed and movable crossbeam, whereby the customer chooses the table designs, controls and milling units suitable for them on a modular basis. The TS/TFS NEO features a new milling unit and a modified Caxis (±400°) which, thanks to its enormous flexibility, can be used for efficient production of highly precise machine parts. The large number of automatically changeable milling heads increases the machine's flexibility within its scope of application. The TFS also allows automatic tool or spindle changing and tool or workpiece measurement. Power:kW 40 Torque:Nm 700 - 1,800 Speed:rpm 4,000 - 6,000 Length:mm 2,000 - 5,000 mm + 1,000 mm steps Width:mm 2,000 - 5,000 mm + 1,000 mm steps X-axis:mm 3,000 - 6,000 Y-axis:mm 3,000 - 4,000 Z-axis:mm 1,500 - 2,500 W-axis:mm 1,250 mm (only for TS) C-axis:° ± 200/± 400/n x 360 X-axis:m/min 30 Y-axis:m/min 40 Z-axis:m/min 30 W-axis:m/min 4 m/min (only for TS) C-axis:°/min 4320

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 2,800 Turning diameter:mm 2,600 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,570 Machining height moveable crossrail:mm 1,120 / 1,560 / 2,000 / 2,440 Moveable crossrail stroke:mm 800 / 1,000 Step moveable crossrail:mm 100 Table diameter:mm 2,200 Table speed:rpm 250 Table drive power S1 100%:kW 51 / 71 / 100 Table torque S1 100%:kW/Nm 26.1 / 36.4 / 37.1 Table load max.:kg 20,000 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 / 1,500 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 2,200 Front pallet Pallet diameter:mm 2,200 Front pallet Swing diameter:mm 2,800 Load on pallet:kg 6,000

High performance 6 axis machining center The STC series has been designed to provide unrivalled economy in the machining of the most demanding structural parts, multiblades and casings with long cycle times, and provide the customer with a whole host of practical options. These machining centers have excellent static and dynamic properties as well as a tried and tested rotatable head, making them the benchmark for heavy chip removal in titanium and Inconel part for the aerospace and power generation industries. Pallet clamping surface according to DIN 55201:mm 1250x1800 (1600x1800) Max. workpiece weight:kg 12000 Column linear travel X:mm 3400 Main spindle vertical travel Y:mm 1900 Table traverse travel Z:mm 2850 Swing diameter:mm 3300 A-axis:degree +/-115 B-axis:degree endless X/Y/Z:m/min 40 A-axis:rpm 14 B-axis:rpm 8 Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Motor spindle 2, max. Speed:rpm 24000 Max. power at 100% duty cycle:kW/Nm 70/60 Total taper:HSK-A63 Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 67 Space requirement for basic machine LxWxH:mm 15900x10500x5450

Die ATX® Beinpresse BPR-650 ist eine reine klassische 45° Beinpresse und auf folgenden Grundlagen konzipiert: Kompakt, schwer belastbar, einfach & intuitiv in der Handhabung.

The SIP SPC Series not only provides the user with the ultimate in precision but also with tried and tested sophisticated automation. Investment in SIP technology produces returns, thanks to aboveaverage longterm precision and many years of durability. Pallet clamping surface mm:630 x 630 (800) Workpiece interference area diameter (mm) mm:1250 Maximum workpiece weight kg:1500 Maximum feed X / Y / Z m/min:40 Maximum number of tool slots:320

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding. It means that it is possible, in a single clamping, to carry out a full machining operation on the CONTUMAT VCE and not simply turning. The rigid cast construction on this lathe ensures low vibration and accurate cutting; hydrostatic guide rails damp vibrations even further. The technical design and numerous fitting options mean that Dörries is able to configure an individual machine to every customer. Swing diameter:mm 1,400 Table diameter:mm 1,000 / 1,250 Working height max.:mm 1,630 Work piece weight max.:kg 6,000 Main drive S1:kW 60 - 2x 80 Torque on machine table S1 max:KNm 23 Speed range:Rpm 450 - 630

In order to produce heavy workpieces with limited available space, Droop+Rein combined the FOGS and TF machine types which are already established on the market into a new machine concept. With the FOGS HD, Droop+Rein offers a machining centre for heavyduty machining, which features high quality and precision at the same time. The constant dynamic dimensions of the Droop+Rein FOGS HD enables the user to use the machine for unmanned finishing e.g. at night or at the weekend. The Droop+Rein FOGS HD is designed for large components, as the traverse paths show (Xaxis 3,000 to 31,000 mm; Yaxis 3,000 to 6,000 mm; Zaxis 1,500 to 2,500 mm). It covers all machining operations within typical toolmaking. The FOGS HD is an efficient (50 to 100 kW (S1 operation)), precise machining highgantry machine with fast and dynamical axes and extreme high torque (2,400 to 7,500 Nm). Power:kW 50 - 100 Torque:Nm 2,400 - 7,500 Speed:rpm 2,500 - 6,000 Length:mm 2,000 - 30,000 + 1,000 mm steps Width:mm 2,000 - 5,000 + 500 mm steps X-axis:mm 3,000 - 31,000 + 1,000 mm steps Y-axis:mm 3,000 - 6,000 + 500 mm steps Z-axis:mm 1,500 - 2,500 C-axis:° n x 360 X-axis:m/min 40 Y-axis:m/min 40 Z-axis:m/min 20 C-axis:°/min 3,600

Beschreibung Frische, knallige Farben im Neon-Look auf deinem DJ-Mixer oder Controller: Mit den Reloop Fader Caps stellst du ein individuelles Design für dein Equipment zusammen - einfach die Caps abziehen und die neuen aufstecken! Die Caps sind griffig gummiert, ergonomisch optimal angepasst und gibt es im praktischen 5er Pack. Customize your Gear! 5 Fader Caps leichte Gummierung für mehr Grip ergonomische Fader Cap-Größe einfaches Austauschen aller Caps möglich individuelles Design für dein Equipment 5 frische, knallige Farben im Neon-Look kompatibel mit vielen DJ-Mixern und Controllern erhältlich in den Farben Gelb, Grün, Blau, Lila und Weiß Gewicht: 14 g (Verpackungseinheit) Größe: 15 x 8 x 3 mm

s230 is an automatic solution for faceting and diamond finishing dials index. s230 production center allows the production of a wide variety on index in various metals. Contrasts of different visual effects are performed by the use of diamond tools or solid carbide tools. The complete solution for small and medium series for finishing index combines multiple operations on a single machine. Features Optical recognition and origin definition of blanks Diamond with the revolver toolholder Machining of LuniNova pockets and micromilling Simple programming interface on Windows A variety of automation systems are available to ensure a high level of autonomy in production Materials:gold, platinum, silver brass and other non-ferrous alloys Camera VGA Sony XCD-V60 (640x480 pixel):Sell size 3,75 x 3,75 μm Optic focal:mm 5,3 x 3,9 Axis X cnc:mm stroke 150 Axis Y cnc:mm stroke 150 Axis Z cnc:mm stroke 123 Axis U cnc:mm stroke 375 Axis C cnc:angle non-stop 0-360 Torque á 600 min-1:Nm 1,1 Power:kW 1 RPM:0 á 4000 min-1 Tool holder interface:ISO 20 Tool release:pneumatic Milling head:mm Ø 20 á 300 Power:kW 2 RPM:Max. 45'000 min-1 Tool holder interface:ISO 10 Tool release:pneumatic Max. Ø tool:mm max. 7 Precision:mm +/- 0,010 Microlurification (controlled vaporization):Vogel Lubrilean Basic unit Indexing system for milling head 6 tools:mm Ø 150 Pallets clamping:EROWA, 3R or specific customer

Beschreibung praktischer Laptop-Bag aus widerstandsfähigem & wasserabweisendem Nylon-Material passend für alle 13''-Laptops oder MacBooks zusätzlicher Stauraum für Modularcontroller oder MIDI-Keyboards mit 25 Minitasten edle Zipper im Reloop Design hochwertige Verarbeitung angenehmer, verstellbarer Tragegurt Maße: 32,5 x 31 x 13 cm Gewicht: 0,972 kg

Beschreibung Frische, knallige Farben im Neon-Look auf deinem DJ-Mixer oder Controller: Mit den Reloop Fader Caps stellst du ein individuelles Design für dein Equipment zusammen - einfach die Caps abziehen und die neuen aufstecken! Die Caps sind griffig gummiert, ergonomisch optimal angepasst und gibt es im praktischen 5er Pack. Customize your Gear! 5 Fader Caps leichte Gummierung für mehr Grip ergonomische Fader Cap-Größe einfaches Austauschen aller Caps möglich individuelles Design für dein Equipment 5 frische, knallige Farben im Neon-Look kompatibel mit vielen DJ-Mixern und Controllern erhältlich in den Farben Gelb, Grün, Blau, Lila und Weiß Gewicht: 14 g (Verpackungseinheit) Größe: 15 x 8 x 3 mm

High performance simultaneous 5 axis machining center for aluminum structures Efficient high performance machining requires a rugged machine buildup without weakness. All technical parameters such as axis strokes, forces, torques and accelerations are set according to application requirements. The design of the STC X series has no bottleneck reducing the maximum possible material removal rates. With its design, unmatched productivity is possible. The STC X machine enhancement is ever ongoing. The goal is to continuously increase the customer benefits, i. e. increase productivity, increase accuracy or expand the application options Pallet clamping surface according to DIN 55201:mm 1250x1800 (1600x1800) Max. workpiece weight:kg 12000 Column linear travel X:mm 3400 Main spindle vertical travel Y:mm 1900 Table traverse travel Z:mm 2450 Swing diameter:mm 2800 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 Motor spindle , max. Speed:rpm 30000 Max. power (100% ED):kW/Nm 120/83 Total taper:HSK-A63 / (HSK-A 63/80) Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 63 Space requirement for basic machine LxWxH:mm 8930x5410x4520

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 6,000 Table diameter:mm 5,000 / 5,500 Y-axis:mm +/- 3,000 Working height max:mm 6,145 Main drive S1:kW 2x 60 - 2x 150

Thanks to the integrated DBF spindle head, the complex production in the processes turning, drilling and milling can be realized in one single workspace. Available in 5 and 6axis versions X / Y / Z travel mm:1,070 / 870 / 1,200 Radial facing slide path mm:+/- 35 Rapid traverse m/min:40 / 40 / 60 Tool holder:HSK-A100 Max. tool length mm:800 Max. tool diameter mm:340 Pallet dimension mm:630 x 630 (630 x 800) Workpiece core contour ø in mm:1,250 Max. workpiece height mm:1,250 Loading mass kg:1,500 Machine length mm:8,100 Machine width mm:4,940

High performance simultaneous 5 axis trunnion machining center The STC series has been designed to provide unrivalled economy in the machining of the most demanding structural parts, multiblades and casings with long cycle times, and provide the customer with a whole host of practical options. These machining centers have excellent static and dynamic properties as well as a tried and tested rotatable head, making them the benchmark for heavy chip removal in titanium and Inconel part for the aerospace and power generation industries. Pallet clamping surface according to DIN 55201:mm 1000x1000 (1000x1250) Max. workpiece weight:kg 3000 Column linear travel X:mm 1950 Main spindle vertical travel Y:mm 2000 Table traverse travel Z:mm 2100 Swing diameter:mm 1950 A-axis:degree -50/+95 (or according to customer requirements) B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 5 B-axis:rpm 5.5 Motor spindle , max. Speed:rpm 6000 Max. power (100% ED):kW/Nm 37/1,235 Total taper:SK 50 (HSK-A100) Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 75 Space requirement for basic machine LxWxH:mm 14300x10200x5450

Fewer rejects thanks to high concentricity and axial runout accuracies (< 2 μm) Wide manufacturing range thanks to precise and powerful table drive (torque motor) Increased productivity through complete machining in just one setup Swing diameter:mm 1,100 Grinding diameter:mm 1,000 Height under grinding wheel thickness 100 mm:mm 600 Standard table diameter:mm 1,000 Table speed:rpm 150 Table load:kg 2,500 Carriages:1 Grinding ram stroke:mm 800 Feed force:kN 10 X- and Y-axis speed max.:mm/min 10,000 Spindle-holder tilt:degree - 5° + 275° Tilt lead:degree 1° (Hirth) Power (conv. GW) (S1):kW 7 à 35 Speed (conv. GW):rpm 5,000 à 12,000 Power (CBN wheels) (S1):kW 15 / 25 Speed (CBN wheels):rpm 8,000 / 18,000 GW diameter (conv. or CBN) max.:mm 150 / 300 / 400 Wheel thickness max.:mm 50 / 100 / 190 Wheel-holder clamping taper face:x Surface grinding spindle (conv. GW) (S1):kW 25 Spindle speed:rpm 5,000 Wheel diameter max.:mm 400 Electropermanent magnetic chuck No. of poles / slots width:mm 24 / 10H10

High performance 6axis machining center The STC series has been designed to provide unrivalled economy in the machining of the most demanding structural parts, multiblades and casings with long cycle times, and provide the customer with a whole host of practical options. These machining centers have excellent static and dynamic properties as well as a tried and tested rotatable head, making them the benchmark for heavy chip removal in titanium and Inconel part for the aerospace and power generation industries. Pallet clamping surface according to DIN 55201:mm 1000x1250 (1250x1250) Max. workpiece weight:kg 5000 Column linear travel X:mm 2200 Main spindle vertical travel Y:mm 1900 Table traverse travel Z:mm 2250 Swing diameter:mm 2200 A-axis:degree +/-115 B-axis:degree endless X/Y/Z:m/min 40 A-axis:rpm 14 B-axis:rpm 8 Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Motor spindle 2, max. Speed:rpm 24000 Max. power at 100% duty cycle:kW/Nm 70/60 Total taper:HSK-A63 Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 60 Space requirement for basic machine LxWxH:mm 15900x10500x5450