Produkty dla ardex r1 beton cire (38)

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

The gas removed from biogas digestion or fermentation units can be heavily contaminated with foam particles, various particulate matter and water vapour. A pre-filtration of the gas (often adequate enough) can be achieved with the use of an ennox gravel filter. The gas flows through the ennox gravel filter layer where large particulate matter and water vapour is left behind. The water collects at the bottom of the filter where it can be drained with a siphon assembly. Following heavy contamination of the gravel filter the spraying unit can be used for rinsing, avoiding the need for opening the digester unit. As an option a gravel removal opening can be installed.

PAS: 3MR- 5MR- 8MR Ce profil garantit une meilleure répartition de la charge sur la dent, un jeu réduit, une réduction de l'usure et du bruit. C'est un bon profil pour le positionnement linéaire et rotatif ainsi que pour la transmission de puissance. Détails

Electrode MIRAL WELDING 6013 4.0x350(box 105uni) - Welding consumables Reference:297.MW.6013.4.0-350Z

COMPOSITION ET ASPECT Ciment spécial, sable et divers adjuvants. La pâte est de couleur foncée. SUPPORTS ADMIS • Béton • Brique en terre cuit • Brique réfractaire DOCUMENTS À CONSULTER DTU 20.1 et DTU 24.1. CARACTÉRISTIQUES TECHNIQUES • Temps de prise : 30 mn • Température admise après séchage complet : 1000 °C CONDITIONNEMENTS Sacs de 5 et 25 kg sur palette houssée. STOCKAGE 6 mois en emballage d’origine non entamé à l’abri de l’humidité. PRÉPARATION DES SUPPORTS Les supports doivent être propres, dépoussiérés, durs et exempts de toute trace d’agents séparateurs. Les supports très poreux ou par temps chaud devront être préalablement humidifiés. TAUX DE GÂCHAGE Environ 3 à 4 l. d’eau par sac de 25 kg. APPLICATION Appliquer à l’aide d’une truelle à maçonner puis d’un fer à joints. Entre deux briques, créer un joint d’environ 1 cm et en retrait de 5 à 7 mm par rapport aux bords.

Biological based concrete stain and cement remover for resistant paving and flooring of natural and concrete stone. Fast and reliable removal of concrete-, cement-, lime- and efflorescence stains.

Aral HighTronic 5W-40 is a high-performance, low-friction engine oil using Aral synthetic technology. It can be used in many cars with petrol or diesel engines (please note manufacturer specifications). The balanced formulation also meets the high wear protection requirements according to VW 505 01 (pump-nozzle specification). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C3 API SN/CF Meets Fiat 9.55535-S2 Meets Ford WSS-M2C917-A GMdexos2™ * MB approval 229.31/ 229.51 Porsche A40 Renault RN 0700 / RN 0710 VW 505 00/ 505 01 Container size:5 Product number:1598939

Rapid Set CONCRETE MIX ist ein auf BCSA-Zementtechnologie basierender, mineralischer, multi-funktionaler Schnellreparaturmörtel für Schichtdicken von 50 - 600 mm. Geeignet für Betoninstandsetzung, Reparatur und Bau von Gehwegen, Fahrbahnen, Beton- und Maschinenfundamente, Schalungsarbeiten sowie Industrieböden, für innen und außen, auch in Nassbereichen. Erstarrungsbeginn nach ca. 15 Minuten, belastbar nach ca. 1 Stunde. Eigenschaften:für Reparatur und Neubau horizontal und vertikal spannungsarm Lieferform:25 kg Papierspezialverpackung

Zement-Basis Wetterbeständig Spannungsarm Atmungsfähig

Art.-Nr. 17700370 Für innen, sehr standfest, mit hohem Füllgrad, hervorragende Haftung auf nahezu allen Untergründen, in der Regel ohne Grundierung einsetzbar, diffusionsoffen

Cages are designed to be unaffected by ground movements. There is a 2 mm thick cage leg at every 60 cm and wide legged pads placed under these legs. In addition, the cage system is fixed with steel pulling dies once every 10 legs. The system which gains maximum resistance on this count can be mounted 8 tier without platform, 12 tier without platform.

L x B x H 615 x 220 x 110 mm Loch - ø mittlere Löcher 45 mm Loch - ø äußere Löcher 42 mm Gewicht ca. 30 kg

OLIK HM 22 - 1000L OLIK HM 22 - 208L OLIK HM 22 - 20L Gamme:OLIK Secteur:HYDRAULIQUE Code EAN/CTIN:3701344705756

Assurez la propreté de la voirie grâce à cette promotion exclusive sur nos bornes propreté hygièbe canine Hygeca avec corbeille Xérios. Cette promotion vous permet de lutter contre les déjections canine sur la voirie. Composez votre lot comme vous le souhaitez. Pour la borne Hygiène canine, ce modèle 500 sacs liasses est disponible en coloris au choix. Ce distributeur de sac canin fait preuve d'une grande résistance grâce à sa conception en acier traité anticorrosion et anti-UV. La poubelle Xerios est une corbeille en polyprolpylène qui se fixera sur le poteau de la borne hygiène canine Hygeca. Son vidage est facile par simple décrochage de la cuve. Coloris au choix. Promo borne hygiène canine Hygeca + corbeille xerios 50L Borne de propreté hygiène canine Hygeca : Composition du kit à enfouir dans le sol : totem + distributeur + poteau Acier traité anticorrosion Acier poudré anti-UV Ref:PROMCANIN Ouverture frontale et serrure à clé Version 500 sacs liasses:maintien des sacs liasses par un crochet Ouverture frontale et serrure à clé Dimensions:315 x 175 x 2280 mm Ouverture frontale et serrure à clé Poids:8.5 Kg Poubelle Xerios Dimensions:430 x 340 x 780 mm Poubelle Xerios Poids:3.04 Kg

Nous fournissons tout type de ciment colle fabriqué selon la norme EN 12004 : du Cilement colle basique (C1) à ciment colle haute performance (C2TES2)

STAUBMESSUNG, ÜBERWACHUNG VON STAUBEMISSION RDC findet in Filteranlagen Anwendung Das Betreiben einer modernen Filteranlage ohne permanente Kontrolle der Staubemissionen ist aktuell kaum noch denkbar. Dies ist nicht nur seitens der zuständigen Überwachungsbehörden relevant, auch für den Betreiber ergeben sich daraus wichtige Vorteile; • Emissionsmessung und Filterüberwachung mit einem Gerät, • Vermeidung sichtbarer Abgasfahnen, • Vereinfachung der Instandhaltung der Filteranlagen durch Früherkennung beginnenden Filterverschleißes, • Ortung defekter Filterelemente, • Möglichkeit gezielter Wartungsmaßnahmen, • Vermeidung von Produktverlusten.

Nom : ABRI DE JARDIN METAL  BRUT  Dimensions: L 170 X  P 170 X Ht 230 cm Surface: 3.04 m2 Qualité : Panneaux acier galvanisé Couleur:   Acier galva brut Inclus :  Large double porte 165 x 185 cm avec fermeture Ouverture utile du garage: 185 cm Nom:ABRI DE JARDIN METAL  BRUT Dimensions:L 170 X  P 170 X Ht 230 cm Surface:3.04 m2 Qualité:Panneaux acier galvanisé Couleur:Acier galva brut Inclus:Large double porte 165 x 185 cm avec fermeture Ouverture utile du garage:185 cm

Type: BM 618 HGV-14 Manufacturer: Tetra Pak Description: Self-cleaning disc centrifuges Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list Bowl type: Intermittent solids discharge Bowl inlet: Hermetic Bowl outlet of light liquid: Hermetically sealed bowl Bowl outlet of heavy liquid: Hermetic discharge Bowl discharge initiation: Timer triggered ejection Degree of bowl discharge: Variable ejection Bowl design: Bowl for separation Drive: Direct drive

Der verbesserte Mirka Deros ist jetzt mit intelligenten Leistungsmerkmalen wie dem Vibrationssensor und der Bluetooth-Konnektivität erhältlich. Mirka® DEROS 680CV - elektrisierende Effizienz: Funktioniert an jeder herkömmlichen Steckdose und sorgt für überragende Leistung. Der hocheffiziente bürstenlose Motor verfügt über starke Leistung und garantiert eine konstante Geschwindigkeit, selbst unter hohem Druck. Die innovative Konstruktion der Maschine sorgt für wenige Verschleißteile. Der DEROS ist wartungsarm, ultrazuverlässig und langlebig. Im Gegensatz zu herkömmlichen Maschinen hat der DEROS eine “geschlossene Bauweise”, die das Eindringen von Staub in den Motor und somit Abnutzung und Schäden verhindert. Technische Daten Leistungsaufnahme (W) 350 Netzspannung (VAC) 220-240 Geschwindigkeit 4000-1000/min Hub 8mm Durchmesser Pas 150mm Konnektivität Bluetooth Absaugung Zentralabsaugung Gewicht 1,1 kg

AGLOU vous propose ses boites de branchement sans fond en béton pour le raccordement au réseau d'assainissement de vos bâtiments. Légères, en béton lisse. Plusieurs dimensions.

Art.Nr.:GRIP-A936-XPRESS, Vorstrich zur Haftverbesserung des Untergrundes nach DIN 18365 “Bodenbelagarbeiten” und DIN 18356 “Parkett- und Holzpflasterarbeiten” geeignet auf nicht saugenden Oberflächen. GRIP A936 XPRESS haftet sehr gut auf glatten, dichten und nichtsaugenden Betonflächen, keramischen Fliesen, Terrazzo, Natur- und Kunststeinplatten, Magnesiaestrich (kein Steinholzestrich), schlecht abgesandeten Gussasphaltestrichen sowie alten festsitzenden Nutzbelägen, wie z. B. homogenen PVC- und Flexbelägen (außer Gummi, Linoleum und Altbelägen mit weichelastischem Rückenaufbau) und alten Fliesenbelägen. Verschraubte V 100 Spanplatten können nach Durchtrocknung von GRIP A936 XPRESS frühestens nach 24 Stunden weiterbearbeitet werden. Für den Einsatz auf saugenden Untergründen empfehlen wir andere geeignete Grundierungen aus unserem Sortiment.

30.9€ TTC

Pour les poussières explosives ou les solvants particulièrement agressifs, des mesures spécifiques sont prises pour les traiter : elles sont normées « ATEX » (ATmosphères EXplosibles). La réglementation est issue de deux directives européennes 94/9/CE ou ATEX 137 (pour les équipements destinés à être utilisés en zones ATEX) et 1999/92/CE ou ATEX 100A (pour la sécurité des travailleurs). Elle répertorie les zones dangereuses selon la composition de l’atmosphère explosive : de gaz, de vapeur ou de brouillard (zones 0, 1 et 2) ou de poussières combustibles (zones 20, 21 et 22). Phosphoris MP Filter fournit tous les types de matériel compatibles au traitement de ces polluants, conformes à toutes les normes en vigueur : gaines, évents d’explosion, ventilateurs, matériel mobile d’aspiration, clapets, aspirateurs, etc.

The modul fountain system made of CORTENsteel half round High quality construction kit for a fountain system made of corten steel The advantages speak for themselves: - available in different dimensions - water basin over 10 meter length possible - a lot of combination options due to the construction system - high quality and MADE IN GERMANY - fully funcional inclusive pump, assembly instruction with assembly parts -all corten steel water basins are UV stabilized inside to protect against waterlogging Selection options - water basin dimensions - standard water basin dimensions - position of the pump - options water inlet

All variations of the Admix C-Series contain the same amount of reactive chemicals at their prescribed dosage rates and provide the same waterproofing and durability performance characteristics. Xypex Admix is blended into the concrete mix at the time of batching to waterproof and protect concrete from the start. It outperforms other methods because of its unique ability to become a truly integral part of the concrete matrix. The Admix C-Series has been specially formulated to meet varying project and temperature conditions.

Arquetas de Transición Adif F Prefabricadas de Hormigón Arquetas de Transición Adif Tipo F en Plataforma - Túnel Prefabricadas de Hormigón Arquetas de Transición Adif de plataforma F “Derecha”, “Izquierda” Prefabricadas de Hormigón Canaleta de Acometida para Arqueta F

ECR45 and ECR60 all codes available.

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg

Unisan A composite mortar that is fibre-reinforced, consolidating, dehumidifying, grey in colour and utilised for the structural restoration of crumbling old or monumental masonry. It contains no substances that are potentially harmful to masonry and is composed of NHL 3.5 natural hydraulic lime and hydraulic binders free from soluble salts, along with silicas with pozzolanic activity, selected siliceous-calcareous aggregates, specific shrinkage-reducing agents and resistant alkaline READYMESH fibres that confer high flex-traction whilst increasing the performance of the mortar’s fracture energy. In conjunction with ARMAGLASS STRUCTURA fibreglass mesh, it is ideal for the structural restoration of old walls or crumbling constructions. Construction of plasters and reinforced slabs in interventions of restoration, construction of plaster and dehumidifying coatings with high performance, bedding of bricks and modular elements. The surfaces should be clean and free of any soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition of "saturated dry surface". In the case of structural reinforcing slabs, you will need to proceed with applying an appropriate reinforcing electrowelded mesh, to be fixed with PROFIX, Grout Micro-J, Repar Tix G2 or Syntech IC 55. Pour about 2/3 of the mixing water into the mixer, add Unisan and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-14% of the weight of the bag. After mixing is completed wait a few minutes before applying. Apply the product by plastering trowel and brick trowel, or preferably with plastering machine (type PFT model G4). Do not apply in case of direct exposure to sunlight or excessive ventilation. Cure the protection and the prolonged moist hardening, of exposed surfaces. Approximately 15 kg/m² of Unisan for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)