Produkty dla bactoferm lhp suche (14)

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Ausführung: - 01 - einstufig - 01D - doppelstufig - 01 FWA - einstufig mit automatischer Waschanlage - 01D FWA2 - doppelstufig mit automatischer Waschanlage

Liquid, scented detergent for washing clothes by hand or in automatic machines. FEATURES Concentrated product, formulated to act in all types of water. Product based on surfactants, soap and complexing agents, effective on all types of dirt. Phosphate-free formulation. FIELDS OF APPLICATION The product is recommended for use in domestic and industrial washing machines, for manual dosing. It can also be used for manual washing of clothes. HOW TO USE Machine washing: We recommend using 20-30 ml of product for every kg of dry clothes, depending on how dirty they are. In the case of hard water, increase the dose by 5 ml per kg of clothes. Hand washing: We recommend using 100 ml of product for every 5 litres of water. For more stubborn stains, apply the product directly and then wash in the washing machine. REF:LAV4113.1

Peroxyde d'hydrogène 30%,50%,60% Le peroxyde d'hydrogène (H₂O₂) est un liquide incolore avec une odeur légèrement piquante il est utilisé comme agent de blanchiment pour les textiles et le papier, comme composant des carburants pour fusées et pour produire du caoutchouc mousse et des produits chimiques organiques. Il est également utilisé dans des applications médicales et pour blanchir les vêtements et les cheveux. Les industries: Produits chimiques ménagers, Engrais, Industrie cosmétique, Horticulture, Industrie pharmaceutique, Industrie alimentaire Les usages: Blanchiment,Production de composés peroxydés organiques,Production de peroxydes inorganiques Traitement des eaux usées, désinfectant, propulseur Propriétés: Numéro CAS 7722-84-1 NOUS numéro 231-765-0 Formule chimique H2O2 Masse molaire 34,01 g/mol Code tarifaire douanier 28470000 ADR ONU2014 pH 1,5 – 4

pour un nettoyage efficace des élastomères médicaux et techniques - Cette installation vous offre la possibilité de nettoyer les articles médicaux et techniques - sauf filet de lavage - avec une efficacité maximale et est conçu avec son volume de charge pour des exigences moyennes. Tous les paramètres peuvent être utilisés de manière pratique et facile et les recettes de lavage peuvent être gérées via le panneau tactile confortable. En fonction des exigences de qualité ou de propreté de l’eau, le traitement avec de l’eau déionisée, déminéralisée ou ultrapure est éventuellement possible à l’aide d’un module supplémentaire. Le W40 est parfaitement équipé pour les exigences de l’Industrie 4.0, la machine peut en option être contrôlée via un serveur OPC UA. Sur demande spéciale, il existe également la possibilité de siliconer des articles en caoutchouc ou de les prévoir d’autres agents de revêtement de surface. Le W40 est la solution optimale pour les exigences moyennes avec des délais d’exécution rapides!

Das bewährte HIGHPOWER Harz mit der langen Reichweite für konventionelle Heizungsanlagen wird ergänzt durch das neue NEXION Harz mit einem definierten Überschuss an Anionenharz zur pH Regulierung.

Die Aufbereitung von Waschwasser entlastet nicht nur die Umwelt, sondern hilft auch, die Betriebskosten für Waschanlagen deutlich zu senken. Die von Mall angebotene Anlage zur Waschwasseraufbereitung arbeitet ohne chemische Zusätze. Die Kosten für Trink- und Abwasser werden durch die Aufbereitung des Waschwassers erheblich reduziert. Zusätzliches Einsparpotential durch Regenwassernutzung Durch die Verwendung von Regenwasser zum Spülen der Fahrzeuge oder zum Ausgleich von Verdunstungs- und Verschleppungsverlusten wird zusätzlich eine große Menge an Trinkwasserkosten und Gebühren für die Oberflächenversiegelung eingespart.

BETACLEAN 3900 Reiniger zum Entfetten von Schmutzrückständen auf Lack, Glas, Metall und nicht porösen Kunststoffen. Basis: EAN:4260534180777 ml:1000

Phase aqueuse Hydrofuge, oléofuge imperméabilisant Effet déperlant – Longue durée – Passage soutenu Résiste aux acides, laisse respirer les supports. Ne rend pas les surfaces glissantes. Pierre de taille (calcaire), marbre, grès, plâtre, brique, terre cuite, béton… Idéal pour sols de parking, terrasses, pavés en béton, dalles de pierre, pavés auto-bloquants destinés aux revêtements des sols, trottoirs, rues piétonnes, pistes de stations services, péages d’autoroutes, aires de stationnements, plages de piscines, terrasses, balcons, sols, escaliers, trottoirs… Réf:AT413 Conditionnement:Bidon de 1 L – Carton de 12 Ex:PROTEAX ANTI TACHE

MEKP-Härter (Peroxide) für UP-Harze, VE-Harze , Klebeharze und Gelcoats.

Protech Balcony Solution based on special silane and siloxane resins in solvent, highly penetrating, transparent (colourless), for quickly, effectively and economically waterproofing balconies, tiled terraces, concrete roofings, external stairs, etc., without removing or intervening on the existing flooring. It does not change the appearance of the support on which it is applied and it does not alter the original slipperiness or its water vapour breathability. It is quick to apply and does not require skilled labour or professional equipment. The flooring treated will be usable after only 2 hours of laying. Protech Balcony is a product that is easy and quick to apply: simply spread it out with a scrubbing brush on clean and dry surfaces to solve the problem of infiltration. The active ingredient, effectively conveyed in a solvent, it penetrates fillings, substrate cracks and porosity rapidly and in-depth. Upon contact with air, it performs a polymerisation reaction that seals and waterproofs, perfectly and in depth, all discontinuities where it has managed to penetrate. After the reaction, the specific polymerised siloxane molecule is stable over time and does not labilise. Thus, the effective life of the product being applied on surfaces which are not subject to dynamic movements and seismic activity, is normally in excess of 10 years. If necessary, if new discontinuities, cracklings, cracks, fissures etc. appear after the first application of Protech Balcony, these may conveniently be resolved with a second application of the product. Given its intrinsically non-pellicular nature, the product will not be subject to fissures, tears, cracks, separations, deterioration and will not yellow over time, under the effects of UV rays (as occurs naturally for epoxy and/or polyurethane treatments). The surfacings treated with Protech Balcony will be resistant to mildew, moss, lichens and other biodeteriogenic bodies. Please note that the effectiveness in terms of water repellence, and watertightness of Protech Balcony has been certified with suitable tests conducted at the laboratories of the department of structural engineering of POLITECNICO DI MILANO (the Polytechnic of Milan). Quick waterproofing, of balconies, terraces, stairs, decks, tiled surfaces, concrete structures, and natural stones, without demolishing the existing flooring. Also for use on vertical surfaces particularly exposed to the inclemency of the weather and atmospheric agents (tiled, plastered, exposed brickwork, etc.). The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. The vanishing points between tiles, if present, should be appropriately treated with suitable acid or alkali cleaners. In this respect it is recommended that the specific acid detergent Deterg-A, diluted with water at a ratio of 1:4. Rinse the treated surfaces with running water. Labile and non-adhering vanishing points, possibly removed, are required to be restored with high adhesion and deformability cement surfacers. In this respect it is advisable to use of the specific two-component waterproof and deformable filler Stucco Balcony. Wait for the necessary time (1-2 days) for drying the filling before applying Protech Balcony. Any expansion joints present, including those relating to the junction line of the tiled flooring and the perimeter kerb (typically made of granite or natural stone), will have to be sealed with high elasticity polymeric materials. In this respect, it is advisable to seal them with Protech Flex, assisted by laying Filtene Fondogiunto and the appropriate polyurethane primer Protech Flex Primer. Pour small amounts of product at a time and spread it evenly over the entire surface with a scrubbing brush or a "water squeegee", until complete impregnation of the support to be waterproofed. Set Protech Balcony with all due care in less accessible and more uncomfortable areas, by using a brush with long bristles or a sponge (edges, skirting boards, corners, sills, wells, chimney flues, discharges, etc.). Allow the product to penetrate for at least 60 minutes. Within maximum 120 minutes of application, remove the excess product on all surfaces treated with a cloth soaked in the diluent Nitro. The product consumption is on average about 0,125 l/m² of surface to be waterproofed; varying according to the absorption of the support and the size of any vanishing points. Normally it is considered that with 1 litre of Protech Balcony you can treat from 7 to 15 m² of surfaces. Packaging: 2-liter can UM: €/l

Protech Sil P Water-repellent, breathable, pigmented paint based on siloxane resins in water dispersion for painting and renovating civil and industrial buildings, and newly manufactured, for both external and internal facades. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana). Protech Sil P creates a microporous filter that effectively prevents the penetration of water and aggressive solutions without compromising the necessary breathability of masonry. Waterproofing and breathable, protective and decorative finishing, for façades in vintage buildings and monuments, subject to protection by the "cultural heritage" or otherwise. Painting of dehumidifying reinforcement cycles with macroporous plasters. Suitable for media like old and new mineral plasters and for pre-existing emulsion paints, provided they are adherent to the media. The application supports should be adequately prepared: free from fouling, powder, crumbling and non-adhering parts, etc., previously treated with the specific fixative Protech Sil Fix. The product can be applied by brush, roller or spray, in two coats. The maximum dilution with water will be 10-15% of the weight of the product. Apply from 0.25 to 0.35 liters of Protech Sil P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg