Produkty dla biogumy (6)

Förnybara energikällor är något som blir alltmer aktuellt för varje dag. Biogas är ett alternativ och här kan FläktComp Sweden bidra med högkvalitativa fläktar som säkerställer att biogasen hanteras korrekt. Biogasfläktar är en typ av gastät radialfläkt, som anpassats för användning i biogasmiljöer där kraven på material och prestanda är mycket höga. Fläktarna levereras vanligtvis som en komplett enhet beståendes av fläkthjul, motor, kåpa, samt vibrationsfötter. För att välja rätt biogasfläkt bör man utgå från driftdata och processutformning, samt om det finns några särskilda krav. Biogasfläktar är precis som namnet antyder ett samlingsnamn för de fläktar som används inom områden där det är extremt viktigt att ingen gas läcker ut från processen, som t.ex. vid biogasproduktion eller biogasförbränning. Fläktarna har olika användningsområden men behöver alla klara av de tuffa krav som ställs i applikationen. Några exempel på användningsområden för biogasfläktar är: Tryck:Upp till 300 mbar Inlopp/Utlopp:DN50-DN200 (PN10) Utförande:Upp till Atex II 2G/3G T1 Drivning:Koppling, remväxel eller direktdrivning (med eller utan frekvensomformare) Utloppsriktning: RD/LD 0 - 315 enl. Eurovent Standardtillbehör:Kompensatorer, vibrationsdämpare, ljuddämpare etc.

Organic grapeseed vegetable oil is obtained by first cold pressing Vitis vinifera’s seeds and later refining. A plant whose origin is located in central and southwestern Europe and southwestern Asia. Nowadays, its cultivation extends to temperate zones around the world. With the refining process, we eliminate the negative characteristics of the oil, specifically in terms of smell and taste. It is highly rich in omega 6 and omega 9, helping to prevent the skin from becoming flaky, acting in healing processes. Refined organic grapeseed vegetable oil is a 100% natural and organic product. INCI:VITIS VINIFERA SEED OIL CAS:85594-37-2 / 84929-27-1 / 8024-22-4 EINECS:287-896-9 / 284-511-6

Syntech Pavistrong A two-component coating with a modified epoxy resin base, specific for protecting concrete surfaces destined to be in contact with aggressive agents or for containing food products and drinking water. Syntech Pavistrong is certified according to EN 1504-2, for the protection of structures in reinforced concrete as well as for food contact, in accordance with the requirements of Ministerial Decree 21/03/73 and subsequent amendments. Syntech Pavistrong is characterized by its excellent chemical resistance to aggressive exposure environments, to alkalis even at high concentration, to medium concentration acids and to the flow of liquids even containing solid suspensions. It is impermeable to water and chemically aggressive agents. It constitutes an effective barrier to the penetration of carbon dioxide and the carbonation of concrete. It is non-toxic, therefore suitable for contact with food and drinking water. It has excellent adhesion to concrete, steel, bricks, stone in general and various materials commonly used in construction. The fluid consistency makes Syntech Pavistrong fast and easy to apply both by brush and roller. Industrial concrete floors. Purification tanks for waste water and related technical rooms. Food tanks, pipes and containers. Digesters and plants for the production of biogas. Coating of canalizations and liquid containment tanks. Water treatment, purification and distribution plants. Containers of acidic and basic substances. Stables, milking rooms, veterinary rooms, slaughterhouses. Analysis laboratories, warehouses, raw material storage areas and production areas. Containers for accidental spills of petroleum products, chemicals and food products. The support on which the resin system is to be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilatations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. Apply by roller, brush or spray from 150 to 200 g / m2 of Syntech Primer EP-W to consolidate the substrate and facilitate the adhesion of the subsequent coating. Apply Syntech Pavicrom when the primer is completely dry and no later than 24 hours from the end of its application. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to first apply the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. Thoroughly mix the two components in their respective containers. Pour the can of component B into the can of component A, mix thoroughly for 2-3 minutes. To obtain a perfect mixing use a mechanical stirrer or a suitable tool. The mixture of the two components must be spread within 20-30 minutes, in order to avoid hardening in the can itself. Note that the reaction rate depends on the ambient temperature (at 30 ° C it hardens in 15 minutes). Apply on the surface to be treated, in two coats, within the indicated times, for an indicative consumption of 500-600 g / m². Do not take partial quantities from the packs to avoid any errors in the mixing ratio that would cause failure or incomplete hardening. Do not dilute the components or the mixture of the two components. From 0.50 to 0.60 kg of SYNTYECH PAVISTRONG for each square metre of surface to be covered, for two coat applications (0.25-0.30 kg per single coat). Can 2 kg [A] - Can 6 kg [A] - Can 1 kg [B] - Can 3 kg [B] - Kit: 1 Can 2 kg [A] + 1 Can 1 kg [B] - Kit: 1 Can 6 kg [A] + 1 Can 3 kg [B]

La photo ne correspond pas au produit pour l'Espagne. Numéro d'enregistrement : 25761 Composition : Huile d'orange 6%

Renewable energy sources are something that is becoming more relevant every day. Biogas is an alternative and here FläktComp Sweden can contribute with high-quality fans that ensure that the biogas is handled correctly. Biogas fans are a type of gas-tight radial fan, adapted for use in biogas environments where the demands on materials and performance are very high. The fans are usually delivered as a complete unit consisting of fan wheel, motor, cover and vibration feet. In order to choose the right biogas fan, one should start from operating data and process design, as well as whether there are any special requirements. Pressure:Upp till 300 mbar Inlet/Outlet:DN50-DN200 (PN10) Type:Up to Atex II 2G/3G T1 Drive:Coupling, belt drive or direct drive (with or without VSD) Outlet Direction:RD/LD 0 - 315 acc. Eurovent Standard accessories:Compensators, vibration dampers, silencers, etc.

The organic guarana seed is obtained from the drying of Paullinia cupana seeds. A climbing shrub native to the Amazon rainforest. The guarana plant receives its name from the tribe of the Guaraní Indians, who used its seed for its multiple applications. It stands out in its composition for its richness in caffeine and phenolic compounds, compounds that give it antioxidant properties. Guarana seed is a 100% natural and organic product INCI:PAULLINIA CUPANA SEED EXTRACT CAS:84929-28-2 EINECS:284-512-1