Produkty dla die skaner (95)

The Z+F PROFILER® 9012 A has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction. A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

The terrestrial 3D laser scanner Z+F IMAGER® 5016A combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. With feature A, which stands for Advanced, the 5016 receives twice as high scan rate of up to 2.187 million pixels/second and more options for leveling the scanner. If the dynamic compensator is deactivated or the tilt is outside the defined range, the tilt is detected by the IMU of the Z+F IMAGER® 5016A.

Based on the high quality laser scanner Z+F IMAGER®, Zoller + Fröhlich GmbH and DMT GmbH & Co. KG have developed an explosion proof 3D laser scanner. The Z+F IMAGER® 5006EX pioneers surveying in underground mining and industries where explosive atmospheres occur. The Z+F IMAGER® 5006EX is the world´s first ATEX approved 3D laser scanner for use in mining and industrial applications under explosive conditions.The Z+F IMAGER® 5006EX is class I and class II approved according to ATEX directive 94 / 9 / EG. The ATEX directive 94 /9 / EG "Equipment and protective systems intended for use in potentially explosive atmospheres" is a European standard. The ATEX approval for this equipment is widely accepted outside the European community as well.

The Z+F PROFILER® 9012 M has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction.A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

With the camera system of Zoller + Fröhlich, color information can be mapped into data measured by the Z+F PROFILER® 9012 in one step. The camera system Z+F MapCam C has high-resolution sensors, a very wide field of view and covers the entire measuring area. The high frame rate of the cameras allows gapless and sharp images at speeds of up to 90 km/h. The camera system is easy to install with just one tool. In addition, it may be used with any mobile mapping system (MMS) which is compatible with the Z+F PROFILER® 9012. Z+F MapCam® C+ The new camera system Z+F MapCam® C+ has high-resolution sensors, a very wide field of view and a high dynamic range with images. Combined with the MapCams they cover the whole measuring area of the 2D laser scanner. The camera C+ is exactly matched to the basic camera C , fully compatible with them and provide very realistic and parallax-free color information.

THE POWERFUL PROCESSING SOFTWARE FOR LIDAR DATA Import, process and manage your LiDAR data from terrestrial, handheld, mobile, airborne laser scanners and easily integrate UAV and 3D imaging data in a single platform. Thanks to the LineUp® Pro technology, automatically align your 3D scans, even without targets! Import point clouds, meshes, CAD models Automatic alignment also without targets Post-processing, analysis and output export

With the camera system of Zoller + Fröhlich, color information can be mapped into data measured by the Z+F PROFILER® 9012 in one step. The camera system Z+F MapCam S has high-resolution sensors, a very wide field of view and covers the entire measuring area. The high frame rate of the cameras allows gapless and sharp images at speeds of up to 80 km/h. The camera system is easy to install with just one tool. In addition, it may be used with any mobile mapping system (MMS) which is compatible with the Z+F PROFILER® 9012. Z+F MapCam® S+ The new camera system Z+F MapCam® S+ has high-resolution sensors, a very wide field of view and a high dynamic range with images. Combined with the MapCams they cover the whole measuring area of the 2D laser scanner. The camera S+ is exactly matched to the basic camera C , fully compatible with them and provide very realistic and parallax-free color information.

The infrared camera Z+F T-Cam is an external solution to document rooms and objects not only three-dimensionally but also thermally. The camera generates 360° thermal panoramas with a resolution of 382x288 pixels. The infrared information is automatically being mapped onto the point cloud. The infrared spectral range is from 7.5 - 13 μm. By using the Z+F T-Cam, many new opportunities arise in the fields of insurance, facility management, industry and forensics. The T-Cam is easy to mount and is connected to the scanner via USB.

The terrestrial 3D laser scanner Z+F IMAGER® 5016 combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. Dimensions Usable in smallest spaces Carry-on luggage size Weight Laser scanner without battery: ≤ 6,5 kg (14.3 lbs) Laser scanner with 2 batteries: ≤ 7,5 kg (16.5 lbs) Ideal weight for stable setup Makes field work easier

The Z+F PROFILER® 9020 and 9020-2 is a highly efficient 2D laser scanner for mobile mapping applications. The rotation speed of the Z+F PROFILER® 9020 is 267 Hz or 16,020 rpm max.. It measures up to 182 m and has a very high data quality. For data capturing in close range, it is equipped with special optics. Compared to previous models, it has an internal reference plate, a very low power consumption, very fast startup time and over 50% reduced weight and size. A new, very powerful laser technology and further developed algorithms ensures highly accurate measurement results on rails, roads, street signs and other traffic control systems such as traffic lights. Technical highlights: 267 profiles/sec. P9020: 1.094 million points/sec. P9020-2: 2.188 million points/sec. 0.2 mm accuracy 182 m range 360° field of view The Z+F PROFILER® 9020 and 9020-2 can be flexibly integrated into different MMS

The Z+F PROFILER® 9020C is the world's first mobile 2D laser scanner with integrated cameras. Generate colored point clouds without external cameras The P9020C has four integrated cameras, each with 5 MPx, which cover the entire 360° scanning area as of a distance of 40 cm. The recordings have high color fidelity and a high dynamic range. Significant differences in light conditions are compensated in such a way that the processing of the images afterwards takes short time or is completely eliminated. Shaded or overexposed areas can hardly be seen in the colored 3D representations. Less cabling and connection effort - only one USB 3 cable required The P9020C's built-in cameras allow for quick installation. Only a USB 3 cable is required for the transmission and control of the system components. Fewer cables also mean less susceptibility to errors and, conversely, more security when collecting data.

The Z+F PROFILER® 9012 has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction. A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

Tunnel surveying - Terratec - Applications

Technical data The AM 03 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose male and female contacts. The contacts are automatically fed by a feeding bowl. The adjustments of the stripping and crimping depth is motoric. 50 different programs can be stored. Adjustments and programming is done with the touch display. The touch display shows all important data, functions and status. The machines may be adapted to different contacts and wires using the corresponding tools. Options Adapter for special blades V-radius blades Z+F crimp force monitor Other crimp forms: B-Crimp, hex Special wire centralizer Form blades

For conductor cross-sections from 0.14 up to 10 mm² (AWG 26-8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

Technical information The dismantling machine AB 01 universal is an electropneumatic driven machine. Exact dismantling of different insulated wires up to an outside diameter of 11.9 mm (0.47 in.) is possible. Settings are very easy to adjust

Particularly in the automotive industry there are currently tests underway to virtually simulate production processes with the help of real models. Laser scanners of Z+F deliver the required 3D data in order to generate such models. Film industry Virtual reality plays a key role in the film industry: special effects (e.g. explosions) can be carried out with digital technology without any danger to the people involved or real objects (buildings, historical monuments, vehicles etc.). Nowadays we can see film scenes that were unthinkable a few years ago. Computer/Gaming Whether in computer games or the internet – virtual reality in this area is here to stay. It does not matter whether real objects are represented virtually or fantasy worlds are created with the help of real objects. With Z+F laser data, both is possible.

Technical information The basic model AI 01 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 5 mm is possible. Adjustments are very easy to handle. In addition a special funnel to infeed a thin wire is also delivered.

Technical information The stripper-crimper AM 03 universal is an electropnaumatic driven machine for rapid and reliable processing of loose male and female contacts. The contacts are automatically fed by a feeding bowl. In the range of 0,14 up to 2,5mm2 (AWG 26-14) wires and contacts can be crimped. Standard is a 4/8-indent crimp corresponding to MIL 22520/1-01. The adjustment of the stripping and crimping-depth is motoric. Different values for 50 programs can be stored. Adjustment and programming is done with the touch display. The touch display shows all important data, functions and errors. The machine can also be converted for different conatcts by using specific tool kits. All tools are easily replacable. Options Z+F crimp force monitor

Z+F 3D phase based laser scanners enable a detailed condition and damage assessment of the current status of a building or complex structure and its surroundings. It is easy to create 2D floor plans or views of the object to plan building or conversion projects of the 3D data. Therefore, 3D data is an ideal planning basis for structural measures. For site measuring, 3D documentation is just the right technology, because you will save time and money. Moreover you can evaluate different options of how the available rooms can be used without accessing the site in reality. The whole work can be done from your office desk and the data will be available even after many years. Structural damages Structural damages always mean economic loss for the owner and user of a building, and can influence the future value of a property significantly.

For conductor cross-sections from 2 x 0.34 up to 2 x 10 mm² (AWG 2 x 22 – 2 x 8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

In the management of large buildings, it is important to have current plans of facades, facilities, furnishings, piping and paths to carry out renovation and conversion work. An exact calculation of the costs is only possible with detailed and current plans. Thanks to the high level of flexibility and user-friendly handling of the Z+F IMAGER®, the laser scanner can easily be integrated into the fields of facility management without a long training period.

Technical information The UNIC-LS is an electropneumatic driven stripper-crimper. This machine allows quick and reliable processing of loose insulated Z+F ferrules for cross-sections from 0.5mm2 to 2.5 mm2 (AWG 20 – 14) with crimping lengths of 6, 8 and 10 mm. Insulated Z+F ferrules for tri-rated wires (special size “S“, multi standard ferrules) can also be processed.

Technical information The UNIC-G is an electropneumatic stripper-crimper. This machine allows a quick and reliable processing of Z+F ferrules on reel in the range of 0.5mm2 up to 2.5 mm2 (AWG 20 – 14) without changing the tools. UNIC-G and UNIC-GS are now available with a fivefold infeed, which allows an even more efficient wire processing. Multi standard ferrules on reel can be used universally.

Technical information With the dereeler UNIROLL cables from cable spools and from boxes can easily feed the UNICUT 8. Optional there is an extra roll for feeding with loose ladder rolls. Special features If the speed of the UNICUT 8 reduces, it can guarantee a optimal handling. The maximum cross section of boxes are 6 mm².

Technical information The AI 04 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 8 mm is possible. Adjustments are very easy to handle with an adjustment knob. Special: An integrated battery allows up to 7,500 working cycles when fully charged and without external power supply.

Technical information The Crimper-LS is an electropneumatic and flexible benchtop crimper for loose insulated Z+F ferrules in the cross-section range from 0.5 – 2.5 mm² (AWG 20 – 14) and crimping length from 6 – 12 mm. Additional tool kits are available optional for 0.34/4 mm² (AWG 22/12). The machine is characterized through a short cycle time and an easy tool change. A stripped wire can be fed in the ferrule directly. The crimping process is started by a footswitch.

For conductor cross-sections from 0.34 up to 2.5 mm² (AWG 22 – 14). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

Technical information The AI 02 S3 is a stripping machine driven by an electric motor. Special feature: A special adapted funnel allows to insert two or three wires and strip it in a single step. By turning the stripping blades, the minimal stripping length can be reduced to 3 mm.

Technical information The Z+F EVOPRESS is an electrically driven crimping press for processing a wide variety of electrical connectors such as Z+F ferrules and Z+F terminals. With its compact design it fits into the Z+F EVOLINE. Crimping Machines, such as the Z+F EVOPRESS, are electrically powered tools specialized in the precise processing of various electrical connections. These machines are particularly utilized in handling electrical components like Z+F ferrules and Z+F cable lugs. Their primary function involves establishing a secure and durable connection between electrical conductors and their corresponding terminals through the application of pressure. The Z+F EVOPRESS and similar crimping machines not only deliver high performance but also provide the capability to process various types of electrical connectors with precision and efficiency. Key Features of the Z+F EVOPRESS: Enhanced hand safety with a protective glass at the front of the machine