Produkty dla die skaner (175)

For listed buildings, there are regular new construction tasks. Often there are no adequate plans on the basis of which planning, modernization or renovation can be carried out. Due to the very high scan rate of more than 1 million measured values per second, range resolution in the millimeter range and a measuring accuracy in the mm range, even the capture of the finest structures and details is still possible with the 3D laser scanners from Zoller + Fröhlich. The 3D documentation is therefore the ideal prerequisite for reconstructions of, for example, design conditions or sensitive stucco work. The recorded inventories, damage, structures and details are recorded in databases and allow a faithful reconstruction of the entire object or of parts of the object at any later time.

Technical information The electropneumatic driven, easily adaptable crimper is specific designed to process loose turned contacts. In the range of 0.08 up to 2.5 mm2 (AWG 28 – 14) wires and contacts can be crimped. Standard is a 4/8-indent crimp corresponding to MIL 22520. Optionally is it possible to adapt the machine for other crimpforms. Manual adjustment of the crimping-depth (by option automatically by motor). The machine can be converted for other contacts by using specific tool kits. All tools are easily replaceable. The crimping process is started by a foot switch. Options Z+F crimp force monitor Adjustment of the crimping-depth by a motor Other crimp forms: 4-indent, B-Crimp

The cable feeder trolley represents an innovative solution for the efficient processing of cables with various cross-sections and quantities, especially in conjunction with the Wire Processing Center. With this additional trolley, cable processing is elevated to a new level. The trolley provides the ability to place up to six different cross-sections simultaneously, ensuring flexible and time-saving handling. Using the cable feeder trolley optimizes the entire cable processing process. The versatility of the trolley allows for efficient handling of different types of cables, be it in terms of cross-section or quantity. This helps streamline workflow and increase productivity.

Technical information The UNIC-L is an electropneumatic driven stripper-crimper. It allows quick and reliable processing of loose insulated Z+F ferrules for cross-sections from 0.5mm2 up to 2.5 mm2 (AWG 20 – 14) with a crimping length of 8 mm. Insulated Z+F ferrules for tri-rated wires (special size “S“) can also be processed.

For Z+F ferrules and integration in fully automatic machines Technical information The electropneumatic driven, easily adaptable crimp modules CM-AEH are specifically designed for Z+F ferrules. They can be integrated in fully automatic machines. Wires and ferrules can be crimped in the range of 0.34 up to 4 mm2 (AWG 22 – 12). Atrapezoidal crimp (CM AEH-G) or quadro crimp (CM AEH-LS) corresponding to DIN46228 part 4 are available. The machines can universally be used in the specified range. An I/O interface enables easy integration and time optimized function in fully automatic machines. CM AEH-LS For loose insulated Z+F ferrules: 0.34 – 4 mm2 (AWG 22 – 12)/Crimping length 6 – 12 mm

Technical information The electropneumatic driven, easily adaptable crimpmodule is specifically designed for Z+F ferrules on reel, fully automatic production lines. Ferrules on reel in the range of 0.5 up to 2.5 mm2 (AWG 20 – 14) can be crimped. Five rolls of ferrules can be inserted in the machine at the same time and the crimping height automatically adapts itself.

Technical information The universal UNIC-LZ is an electropneumatic stripper-crimper for quick and reliable processing of loose Z+F twin ferrules in the range of 2 x 0.5mm2 to 2 x 1.5 mm2 (AWG 2 x 20 – 2 x 16) with a crimping length of 8 mm.

Our in-house paint shop offers many advantages to our customers. Desired colors can be applied quickly and thus we can offer a high degree of flexibility.

Crime scene surveying - LKA - Applications

PolyWorks is a software to process and evaluate optically digitized, three-dimensional data. It is mainly used in the fields of reverse engineering, design, quality assurance, digital manufacturing, rapid prototyping, cultural heritage archiving and medical applications. PolyWorks Metrology Suite PolyWorks|Inspector PolyWorks | Inspector reads, processes, and compares three-dimensional measurement data. On the basis of using direct interfaces to laser scanners, high-resolution 3D point clouds can be imported. PolyWorks Inspector provides the ability to analyze the recorded data or compare it with design data. PolyWorks|Modeler The PolyWorks | Modeler package is suitable for creating uniform polygon models and NURBS surfaces from point clouds with high density. The software provides polygonal modeling for polygonal production applications. The PolyWorks | Modeler covers the applications of surface reconstruction as part of the reverse engineering process. PolyWorks

Technical information The AM 02 C (“Compact“) is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose insulated Z+F ferrules with cross sections from 0.14 – 0.34 mm2 (AWG 26 – 22) and the AM 02.1 C is for uninsulated Z+F ferrules with cross sections from 0.14 – 0,75 mm2 (AWG 26 – 18). Special features Easy tool change Short tooling time Crimp quality conforms to DIN 46228 Compact design

For conductor cross-sections from 1.5 – 16 mm² (AWG 16 – 6). Material: tin-plated copper.

For conductor cross-sections from 0.14 up to 150 mm² (AWG 26 – 300 kcmil). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

Technical information Product information Designed specifically for the machines of the AM-/CR-series of Zoller + Fröhlich the crimp force monitoring CK 01 is an integrated component for the automatic monitor of crimping operations and thus ensures high quality crimping products. The crimp force monitoring CK 01 can be directly integrated into the machines from Zoller + Fröhlich or installed externally as a retrofit kit. Special features Precise high-speed, crimp force analysis For wire cross-sections from 0.14mm2 – 6 mm² (AWG 26 – 10) Integrated SPC (Static Process Control) with online option Absolute power measurement in Newton [N] TFT-graphic-colour-display with touchscreen Storing up to 50 different programs and parameters Quality assurance through documentation of each crimp Recognize the following crimp faults Missing strands Improper wire gauge Missing crimp contact Inadequate stripping Improper crimp depth

Technical information The cross-section range is reduced from 0.05 up to 2.5 mm² (AWG 30 – 14) and a special front plate is added. This machine can be used for shorter infeed lenght of 15 mm + stripping length.

Technical information The UNIC-GV is an electropneumatic benchtop stripper-crimper, which allows the processing of five ferrules on reel with different cross sections. Ferrules on reel in the range from 0.5mm2 to 2.5 mm² (AWG 20 – 14) with crimping lengths of 8 mm or 10 mm can be processed with no down time. The user simply chooses the cross-section on a touch display. Ferrules on reel for multi standard conductors can also be processed.

Technical information The AM 02.1 is an electropneumatic modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules. The stripper-crimper may be adapted by using the corresponding tools for ferrules of cross-sections from 0.25mm2 to 2.5 mm2 (AWG 24 – 14) and crimping lengths from 5mm to 12 mm. Specification For definition of the required tools the correct specification of the processed ferrules as well as the processed wires are needed. Options: Quadrocrimp-tool The stripper-crimper can be equipped with a quadrocrimp-tool which creates 4-side quadratic crimp.

Technical information The electropneumatic driven, easily adaptable crimpmodule is specifically designed to process loose turned contacts and to be integrated in fully automatic machines. In the range of 0.08 up to 2.5 mm2 (AWG 28 – 14) wires and contacts can be crimped. Standard is a 4/8-indent crimp corresponding to MIL 22520. Optionally is it possible to adapt the machine for other crimpforms. The adjustment of the crimping-depth is motoric, 50 different programs can be stored. The machine can be converted for other contacts by using specific tool kits. All tools are easily replaceable. Options Crimp force monitor Other crimp forms: 4-indent, B-Crimp

Technical information The AM 04.1 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules. The stripper-crimper can be adapted by using the corresponding tools for ferrules of cross-sections from 4 up to 10 mm2 (AWG 12-8) and crimping lengths from 9mm to 18mm. Specification For definition of the required tools the correct specification of the processed ferrules as well as the processed wires are needed. Options: Quardrocrimp-tool The stripper-crimper can be equipped with a quadrocrimp-tool, which creates a 4-side quadratic crimp.

Technical information The AI 01 E is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 5 mm is possible. Adjustments are very easy to handle with an adjustmend knob. In addition a special funnel to infeed thin wires is also delivered. Special: An integrated battery allows up to 10,000 working cycles when fully charged and without external power supply.

Surveying of insurance damage - Applications

Zoller + Fröhlich has developed the Z+F PROFILER® 9012 and the Z+F PROFILER® 9020 laser scanners for mobile mapping applications, which can be flexibly integrated into the mobile mapping systems of almost all MMS providers. Railway applications on vehicle (train, etc.) and trolley platform Light space applications, for the inventory of tunnel tubes (railway and road), vegetation, signs and safety corridors Road applications (MMS) for road maintenance, traffic infrastructure detection, and general object acquisition Because of the high data capture rate, Z+F laser scanners operate accurately even from mobile platforms, at speeds of up to 120 km/h (approx. 75mph).

Assortment box, white base, filled with twin ferrules - Ferrules assortment boxes and case

Z+F has been offering loose ferrules for multi standard conductors for some time. The ferrules come with an extended plastic collar and allow flexible processing of various conductors. From now on, as a world‘s first, ferrules on reel will also be available for processing multi standard conductors. The details are as follows: Cross sections and colors The ferrules on reel will be available with cross sections from 0.5 - 2.5 mm² (AWG 20-14), crimping lengths from 8 - 10 mm and in the established colors. Customer specific colors or branding are also available upon request. Please contact your local Z+F partner for details. Benefits Ferrules for multi standard conductors can be processed without a tool change The acquisition of a new machine is not necessary Processing standard ferrules will still be possible

Technical information The AI 04 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 8 mm is possible. Adjustments are very easy to handle with an adjustment knob.

Structure Modeling Tools Reduce Modelling Time by Up to 80% with the Automated Structural Modeling Tools in EdgeWise 5.1. The speed and accuracy of EdgeWise automated feature extraction — now for structural steel and concrete. Modelling steel from scan data can be a pain. Current software is slow and often inaccurate, leading to missed deadlines and cost overruns. The new structural modeling tools in EdgeWise 5.0 change all that by applying advanced extraction algorithms and automated modeling technologies to accurately extract steel, concrete and wood structure faster than ever before. Plant Modeling Capabilities EdgeWise offers a host of features and tools to bring you from field-to-finish more accurately and much faster than ever before. Automated extraction, spec-driven fitting placement, billion-point visualization, and exacting quality assurance tools all combine to make EdgeWise a true end-to-end modeling solution for process plants.

Technical information The modification of the starting unit also enables this machine to strip lengths from 13 up to 30 mm.

LFM Modeller With LFM Modeller, users can create intelligent 3D models of existing laser scan data and export the models to a variety of 3D CAD systems, with some few clicks. LFM NetView LFM NetView is a web-based application suitable for engineering and asset management. The application is available either as a standalone application or as a web browser plug-in, allowing free, secure access to huge databases with an unlimited number of scans. LFM Server With LFM Server, users can access and work with pre-registered 3D laser scan data, compare the planned design with existing data, and use CAD packages from AVEVA, Autodesk, Bentley, or Intergraph. LFM Gateway LFM Gateway provides a unique connection to terrestrial 3D scanners. The application can import data from mobile, handheld or airborne laser scanning.

Technical information The AM 02 universal is an electropneumatic, universal stripper-crimper, for rapid and reliable processing of loose insulated Z+F ferrules from 0.5mm2 to 2.5 mm² (AWG 20 – 14) with a crimping length from 6mm to 12 mm. Additional tool kits are optional available for 0.34/4 mm² (AWG 22/12). Special features Easy tool change Short tooling time Crimp quality conforms to DIN 46228

Technical information The electric cutting machine impresses with its compact build, quick processing times and flexible applications. Special features: Easy operation due to its 5“ display Simple insertion of wires Horizontal working level for improved insight into the operating area Guided conduction of cut wires Possibility to generate complete projects on the machine Optional extension for multiple infeed with the Z+F EVOFEED Full integration into the WPC is possible Multiple infeed Z+F EVOFEED By providing up to 12 conductors it is possible to sequentially process complex projects in a simple and effective way. The automatic feeding process makes manual interference obsolete and allows the processing of different cross-sections or colors according to the respective planning. This is very time-saving for the overall process, as individual jobs and projects can be processed autonomously.