Produkty dla instrumenty (153)

The programmable pressure switches of the 22-PS series are encased in a compact yet robust steel housing and are available with PNP or NPN wiring. The pressure switches can be supplied pre-configured at the customer's request. With the aid of the dV22-PP programming unit (available for purchase separately), the two switch outputs can be programmed at any time to be normally closed or normally open at a range of switching points with a window or hysteresis function. Pressure Ranges:0…4 to 0…400 bar Total Error Band:±2,0 %FS @ 0…80 °C Interfaces:0,5…4,5 V, 2 switch outputs Special characteristics:Programmable pressure switch Homologation:none

The front-flush pressure transmitters of the 35X series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. Pressure Ranges:0…0,3 to 0…1000 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @ -10…80 °C Interfaces:RS485, 4…20 mA, 0…10 V Temperature Range:-40…120 °C

The pressure transmitters of the 33X series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. Additional measurements and selections can optionally be used to achieve a precision (and also, if calibrated in an accredited test laboratory, an accuracy) of 0,01 %FS. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. Pressure Ranges:0…0,3 to 0…1000 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @ -10…80 °C Interfaces:RS485, 4…20 mA, 0…10 V Temperature Range:-40…120 °C

The pressure transmitters of the 7LD series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Pressure Ranges:0…3 to 0…200 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 15 mm x 5 mm

Das AquaPrecision pH-Messsystem von Vuille pH-Elektroden AG bietet die ideale Lösung für genaue pH-Kontrollen in Aquarien, Gartenteichen und bei der Pflege von Gartenböden. Das System umfasst eine pH-Elektrode mit Kunststoffschaft, die speziell für diese Anwendungen entwickelt wurde, sowie ein hochpräzises pH-Meter. Eigenschaften: Speziell für Aquaristik und Gartenpflege: Die pH-Elektrode mit Kunststoffschaft ist optimal für den Einsatz in Aquarien, Gartenteichen und bei der Überwachung von Gartenböden geeignet. Sie liefert zuverlässige Messergebnisse für eine präzise pH-Kontrolle. Robuste Kunststoffkonstruktion: Der Kunststoffschaft der Elektrode ist robust und widerstandsfähig gegenüber den spezifischen Bedingungen in Aquarien, Gartenteichen und Gartenböden. Dies gewährleistet eine lange Lebensdauer und zuverlässige Leistung.

The pressure transducers of the 6L series have a small and compact design, making them ideally suited to OEM applications with limited installation space. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet. Pressure Ranges:0…10 to 0…200 bar Accuracy:±0,5 %FS Long Term Stability:±0,35 %FS Dimensions:⌀ 13 mm x 4,5 mm Temperature Range:-10…80 °C

The pressure transducers of the 4L series are piezoresistive pressure sensors, isolated encapsulated in oil-filled metal housings. The flush separating membrane is laser welded without gaps. Each pressure transducer is measured via pressure and temperature and delivered with a detailed calibration sheet. Pressure Ranges:0…10 to 0…200 bar Accuracy:±0,5 %FS Long Term Stability:±0,5 %FS Dimensions:⌀ 11 mm x 4,2 mm Temperature Range:-10…80 °C

The pressure transducers of the 8L series have a compact, robust housing made of stainless steel, giving them excellent long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet. Pressure Ranges:0…0,2 to 0…200 bar Accuracy:±0,5 %FS Long Term Stability:±0,2 %FS Dimensions:⌀ 17 mm x 7 mm Temperature Range:-40…125 °C

Magtrol’s Cogging Test System is a stand-alone test system designed to control and measure Detent Torque, Cogging Torque and Friction Torque. The test System includes a precision geared motor, a TS Series Torque Sensor integrating a 5 000 pulses encoder. CTS 100 to CTS 102 have a built-in security clutches to avoid system overload by mishandling when not in use. The geared motor drives the MUT (Motor Under Test) at a low speed from 1 to 10 rpm (respectively 8 rpm for CTS 103 and CTS 104), while acquiring its cogging torque related to angle position. The torque measurement covers a range up to 1 N∙m (depending on the selected torque sensor) with an accuracy of ± 0.1 mN∙m (for TS 100 – 50 mN∙m and TS 101 – 100 mN∙m). The executable software controls the system and displays acquired data. It provides accurate peak-to-peak measurement of cogging torque and displays X-Y or polar graphs as well as FFT analysis. ... more information www.magtrol.com Torque Detection:<1mN∙m ... 1N∙m Rated torque range:50/100/200/500/1000mN∙m Accuracy:0.1% of rated torque Angle Detection:0.018° (5000 Pulse Per Revolution) Operating speed:1 to (8)10rpm Operating Direction:CW / CCW

The series 23 pressure transmitters are designed for industrial applications and are based on the highly stable pressure transducers of the 10L series and a fully analog circuit. Thanks to its modular concept, this series can be flexibly adapted to customer-specific pressure connections and connector plugs. Pressure Ranges:0…0,2 to 0…1000 bar Accuracy:±0,5 %FS Total Error Band:±4,0 %FS @ -10…80 °C Interfaces:4…20 mA, 0…10 V Temperature Range:-40…100 °C Pressure-resistant encapsulation:Serie 23Ed

The pressure transmitters of the 7LHPD series for high pressure applications use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Pressure Ranges:0…400 to 0…1000 bar Accuracy:±0,15 %FS Total Error Band:±1,0 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 15 mm x 8 mm Intrinsic safety:Series 7LDEi

The differential pressure transmitters of the PD-33X series are suitable for 'wet/wet' applications. They have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure small pressure differences even at an extremely high line pressure. The transmitters use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. Pressure Ranges:0…3 to 0…30 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @-10…80 °C Line pressure:200 bar / 600 bar Interfaces:RS485, 4…20 mA, 0…10 V Special characteristics:Classic 'wet/wet'

The differential pressure transmitters of the PD-39X series measure the pressure difference indirectly using two absolute pressure sensors. The dual-sensor design with numerical differential formation also outputs the line pressure values via the digital RS485 interface and guarantees a high overload resistance. The additional analog current or voltage output is primarily used to output the differential pressure range, which is freely rangeable within the line pressure range. Pressure Ranges:0…3 to 0…300 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @-10…80 °C Line pressure:0…3 to 0…300 bar Interfaces:RS485, 4…20 mA, 0…10 V Special characteristics:Line pressure measurement

The capacitive pressure transmitters of the 41X series are designed for measuring relative pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output. Pressure Ranges:0…1 to 0…200 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:I2C Temperature Range:-40…110 °C Dimensions:⌀ 19 mm x 5 mm

The front-flush pressure transmitters of the 35X-Ei series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…0,3 to 0…1000 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @ -10…80 °C Interfaces:RS485, 4…20 mA, 0…10 V Temperature Range:-40…120 °C

These low-cost miniature pressure transducers have been specially developed for very rapid hydrodynamic and aerodynamic in situ pressure measurements. The 2Mi sensors are available in a variety of housing designs and can simply be stuck on at the desired location. Despite its miniature design, the sensor chip is protected against external influences by a steel housing and a silicone elastomer coating. It can also be used in liquids. Pressure Ranges:0…1 to 0…400 bar Accuracy:±0,5 %FS Pressure Connection:Elastomer coating Dimensions:⌀ 4,5 mm x 3 mm Temperature Range:-20…80 °C

The high-pressure transducers of the 10LHP series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet. Pressure Ranges:0…200 to 0…1000 bar Long Term Stability:±0,25 %FS Dimensions:⌀ 19 mm x 15 mm Temperature Range:-20…100 °C Material:Steel 1.4435

The LPX low-pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 10 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and output both on the display and via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements. Pressure Ranges:-0,85…10 bar Accuracy:0,05 %FS Interfaces:RS485 Display:5-digit LCD display Special characteristics:For air pressure

The TSC Series is the Torque and Speed Conditioner used to connect Magtrol Eddy-Current (WB) or Powder (PB) Dynamometers to the DSP7000 Dynamometer Controller. Powered by the dynamometer controller, and based on a precision instrumentation amplifier, the unit amplifies and filters the torque signal. It also provides power and connections for the speed pickup sensor which is located in the dynamometer. Offset:±0.2% (Full Scale Defection) Symmetry:±0.1% (Full Scale Defection) Bandwidth (3dB single pole):20Hz Offset Drift:<100ppm/ °C Sensitivity Drift:<50ppm/ °C Supply Voltage:±20 - ±30V Supply Current:40mA nominal / 45mA max. Torque O/P Voltage:5VDC ±0.2% Max. O/P Current:5mA Min. O/P Load:1kΩ

The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported. Pressure Ranges:0…10 to 0…100 mH2O Total Error Band:± 0.1% FS @ -10 ... 40 ° C Reading capacity:114'000 measuring points Dimensions:ø 22 mm Special characteristics:Additional conductivity measurement

La table Magtrol pour freins dynamométriques et fixations permet de faire des tests en position fixe ou itinérante.

The differential pressure transmitters of the PD-23 series are designed for industrial applications and are supplied with a G1/4 internal thread as standard. They are based on a fully analog circuit. The PD-23 transmitters have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure. Pressure Ranges:0…0,2 to 0…20 bar Accuracy:±0,5 %FS Total Error Band:±4,0 %FS @ -10…80 °C Line pressure:200 bar Interfaces:4…20 mA, 0…10 V Special characteristics:Classic 'wet/wet' Temperature Range:-40…100 °C

The pressure transmitters of the 4LD-Ei series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…3 to 0…200 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ 0…50 °C Interfaces:I2C Dimensions:⌀ 11 mm x 4,2 mm

CLA bietet ein komplettes Sortiment an Sensoren, die alle bidirektional, induktiv oder resistiv sind und eine gute Linearität und vernachlässigbare Hysterese ermöglichen. Diese Sensoren können Drehmomente im Bereich von 1uNm bis 1Nm messen.

The HPX high-pressure calibrator is a high-precision calibration instrument for pressures between 0 bar and 700 bar. The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and is both shown on the display and output via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements. Pressure Ranges:0…700 bar Accuracy:0,05 %FS Interfaces:RS485 Display:5-digit LCD display Special characteristics:For hydraulic oil

Le contrôleur haute vitesse programmable DSP7000 pour freins dynamométriques de Magtrol utilise les techniques les plus modernes de traitement de signaux et ouvre de nouveaux horizons aux essais de moteurs. Le contrôleur DSP7000, développé pour une utilisation avec les freins à hystérésis, les freins à courant de Foucault et à poudre, ainsi qu’avec des couplemètres de Magtrol et des systèmes auxiliaires, peut être commandé par PC moyennant une interface USB ou en option IEEE-488 ou RS 232. Avec sa vitesse de transmission de 500 points de mesure par seconde, le contrôleur DSP7000 se prête aussi bien à des utilisations très exigeantes en laboratoires de certification que sur des lignes de production. DSP7001 Mono-canal:solution avantageuse et d’utilisation aisée DSP7002 Bi-canal:permet de faire fonctionner simultanément deux équipements de manière indépendante Unités de couple au choix:anglaise, métrique et SI (standard)

These catheters are suitable for research and laboratory applications. Different sizes (4F to 8F) and modular design allow any sequence of sensor chips. Pressure Ranges:-0,5…0,5 bar Accuracy:±0,5 %FS Pressure Connection:4F / 5F / 6F / 8F Dimensions:⌀ 1,33…2,67 mm Temperature Range:20…40 °C

The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported. Pressure Ranges:0…5 to 0…10 mH2O Total Error Band:±0,1 %FS @ -10…40 °C Reading capacity:57'000 measuring points Dimensions:ø 22 mm Special characteristics:With integrated barometer

The high-temperature pressure transmitters of the 35XHTC series can be used at media temperatures of up to 300 °C. The remote electronics are designed for temperatures of up to 120 °C. They use digital compensation with a mathematical model to achieve an accuracy of 0,5 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. The standard model of the 35XHTC series has a G1/2 thread as pressure connection. Pressure Ranges:0…3 to 0…1000 bar Accuracy:±0,05 %FS Total Error Band:±0,5 %FS @ 20…300 °C Interfaces:RS485, 4…20 mA, 0…10 V Temperature Range:0…300 °C

The pressure transducers of the PD-10LHP series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure. Pressure Ranges:0…0,1 to 0…30 bar Line Pressure:600 bar Accuracy:±0,25 %FS Long Term Stability:±0,15 %FS Dimensions:⌀ 19 mm x 35 mm Temperature Range:-40…125 °C