Produkty dla instrumenty (274)

The Atlas SUNTEST XXL+ FD is a large state-of-the-art xenon flatbed instrument. It’s completely target designed to meet the testing needs of the FMCG industry, such as drinks, foodstuffs, personal care or household products. XXL+ FD enables consumer goods manufacturers to test their products realistically within very short test times, typically with acceleration factors between 10-30 versus real time. It’s for reliable qualification of stable product formulations, determination of appropriate packaging materials, and supporting product shelflife claims. 3x 1700 W air-cooled Xenon Lamps 3000 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Measurement and Control of Irradiance 300-400 nm / 340nm or 420nm Measurement and Control of Black Standard (BST); (Black Panel optional) Measurement and Control of Chamber Temperature Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test method Multilingual User Interface Control Panel tiltable for increased operating comfort Thermal insulation of test chamber and periphery preventing water condensation Temperature control selectable either via CHT (15° * - 70 °C; *with chiller) or via CHT and BST (25° * - 100 °C; *with chiller) simultaneously (dual control) Adapted chiller SunCool XXL+ for testing at low temperatures in the range 15-30°C CHT; detachable for standard weathering testing needs Ultrasonic humidification system for controlled humidity during operation without SunCool Specimen spray system with integrated 60 l water reservoir for spray cycles at 25°C ** - 70°C Static, horizontal exposure area for flat or 3D specimen Test chamber with 5 ° slope for optimum spray water drain Access port ca. 3,0 x 2,5 cm for potential use of additional external sensors inside the test chamber Light cassette including non-ageing aluminium reflector, coated quartz filter and slot for additional optical filters Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Sliding sample table for easy specimen loading; exposure area (WxD) 74 x 37 cm

The Atlas SUNTEST CPS+ is the small entry model. CPS+ is the most widely used benchtop xenon instrument in the world. Its compact design, easy handling and proven reliability make it the ideal quality control and R&D screening device for a variety of industries, such as plastics, packaging, pharmaceuticals, cosmetics, and many more. 1x 1500 W air-cooled Xenon Lamps 560 cm 2 exposure area Measurement and control of Irradiance in the wavelength range 300-800 nm / Lux; or 300-400 nm / 340 nm Measurement and control of Black Standard Temperature (BST) Display of Chamber Temperature Display of Test Values and Diagnostic Messages Parameter Check Two pre-programmed test methods Storage for 6 user-defined test methods Multilingual User Interface Benchtop design 90 x 35 x 35 cm Static, horizontal exposure area for flat or 3D specimen Fan-controlled BST from 45-100 °C (without chiller unit SunCool) Non-aging reflector and filter system, consistent of selectively reflecting mirrors and a coated quartz Switch-off choices Radiant Exposure or Test Time Base Filter as carrier for additional optical filters Data output via serial interface RS232 Internally integrated Memory Card for Software Updates Light Monitor 300-400nm Light Monitor 300-800nm Humidity Sensor for measuring relative humidity during testing

The Atlas SUNTEST XXL+ is a large state-of-the-art xenon flatbed instrument. The 3000 cm2 test chamber is perfect for high volume weathering testing of large flat or 3-D specimen. SUNTEST XXL+ offers a complete set of features ideal for standard testing covering all common industry weathering standards. 3x 1700 W air-cooled Xenon Lamps 3000 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Measurement and control of Irradiance 300-400 nm / 340nm or 420nm Measurement and control of Black Standard (BST); (Black Panel optional) Measurement and control of Chamber Temperature Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test method Multilingual User Interface Control Panel tiltable for increased operating comfort Ultrasonic humidification system for humidity control Specimen spray system with integrated 60 l water reservoir Static, horizontal exposure area for flat or 3D specimen Test chamber with 5 ° slope for optimum spray water drain Access port ca. 3,0 x 2,5 cm for potential use of additional external sensors inside the test chamber Light cassette including non-ageing aluminium reflector, coated quartz filter and slot for additional optical filters Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Various specimen holders to hold different panel sizes. XenoCal sensors to calibrate BST and irradiance. Large variety of filter systems: coated and uncoated quartz, special UV glass, daylight filter, window glass, Solar ID 65, Solar Standard, to meet various spectral specifications in standards.

Manual, semi- or fully-automatic microscopes for spinneret inspection "Made in Germany" since more than 40 years. high mechanical stability for long term inspection- and, due to that, spinning-quality. excellent optical image quality for fatigue-proof operation half- or fully-automatic inspection in combination with motorized axes improves the efficency and reduces operator influence by using the UHL component system, the Inspection Microscopes can be easily customized and provide simplified maintenance the PM4, PR5, PR7, PR8 and PR9 Inspection icroscopes are providing a direct, alternating view of capillary and counterbore without moving the spinneret several instrument types provide the fast inspection during stage movement with a large field of view with a speed of up to 2300 capillaries per minute

The portable traveller microscope B30-MTM is used to inspect structures and defects on metallurgical surfaces, e.g. gas pipes. X/Y fine adjustment USB power supply

Microscopes for wafer inspection

Valuable, portable measuring microscope with integrated coaxial and angular incident illumination. steady, anodized aluminium body focussing by knurled ring and fine-pitch thread transformer with LED or battery LED lamp Magnifications:20x tos 800x Fields of view:8.9 mm to 0.35 mm Measurement range:Z 8 mm

The portable measuring microscope TM2 is used to measure structues on rollers and flat or cylindric products with 3 digital axes (X/Y/Z) - self contained with integrated batteries. solid v-block base for stable attachment rubber coated surface protects the product against scratches and damage eyepiece with diopter compensation and crosshair with concentric circles coaxial coarse / fine movement for focussing Magnifications:75x to 200x Fields of view:2.6 mm to 0.35 mm

Universal centring microscope to set up tool machines (for example milling or drilling machines). The edges of a workpiece can be positioned, rotary stages can be centered or machine spindles can be aligned. The centring microscope is fixed in the machine instead of the tool. the image is true erect and with high contrast the eyepiece has a graticule with crosshair and concentric circles LEDs are used for the incident light 5 µm centring accuracy can be achieved DIN 2080-A 40 (short taper) standard fixture Magnification:30x Field of view:5 mm

Universal centring microscope to set up tool machines (for example drilling and milling machines).

2 linear axes rotary stage eroded custom mounting device

Eyepiece with crosshair and micrometer spindle for defect measurement.

With recurring assembly dimensions, the rotary stages likewise the lift and swivel stages allow diversification when combining with other UHL's positioning systems.

The microhardness testers of the UHL VMHT series provide semi- or fully-automatic low-load Vickers or Knoop hardness testing from 1 g to 2 kg. Using brilliant Leica optics and a high valuable load mechanism with fixed weights to apply the test force, repeatable and long time stable results are achieved. Even the basic model is equipped with a user friendly motrized turret, an optical focus helper and motorized load selection.

Sturdy, optical precision instrument to be attached on machines, control devices, measuring devices and equipment.

The caliper is fixed in a special holder. A precise linear axis is moving the loose jaw of the caliper. The caliper display value is transfered with an adaptor cable and is compared with the real position of the linear axis. The difference is shown as graphical curve according to VDI/VDE 2617. The distances and widths of unassembled scales can be measured with the integrated optic and imaging software.

for the measurement of control cams on plasic rings in automatic gearboxes.

portable measuring microscopes video measuring microscopes toolmakers measuring microscopes

Mit seinem kompakten, robusten Design und dem internen Temperatursensor kann der RTR501BL in Umgebungen von -40℃ bis +80℃ eingesetzt werden und ist wasserdicht nach IP67. Außerdem hat er eine Batterielebensdauer von bis zu 4 Jahren. (Batterie nicht im Lieferumfang enthalten). Durch seine langsame Reaktion auf Temperaturänderungen ist er ideal für die Temperaturüberwachung von Produkten, die in Kühlschränken gelagert werden. Der RTR501BL verfügt über eine drahtlose Funkreichweite von bis zu 150 m (500 ft) mit kompatiblen Basiseinheiten. Sein robustes und kompaktes Design macht ihn ideal für das Temperaturmanagement beim Transport von Lebensmitteln, aber auch von pharmazeutischen Produkten und Präzisionsgeräten. Die Batterie mit hoher Kapazität (nicht im Lieferumfang enthalten) verringert das Risiko von Datenverlusten und erspart lästige Batteriewechsel. Temperaturbereich:-40 bis 80°C

Portable microscope for measuring of structures on rollers and flat or cylindric products with 3 digital measurement axes (X/Y/Z). Completely self-contained with integrated batteries.

Small interferometer

plus a vertical and horizontal incident light microscope. granite base stand 3 Z axes with 100 mm stroke XY stage with 150 x 150 movement range rotary stage

backlash-free pre-loaded roll bearing for high true-running and axial run-out accuracy backlash-free pre-loaded worm drive different mounting bore holes in the turntable to assemble fixtures and devices

4 motorized axes incident and transmitted illumination

The flexible, easy-to-learn measuring software for two dimensional measurements of primary samples and small batches by either hand-operated or motorized-operated measuring microscopes, for use in laboratories or production areas. OMS is available in english or german language. measuring in the video image by mouseclick easy manual measuring by mousclick directly in the video image automatic measuring functions intuitively usable tools are available for the automatic edge detection of point, line, circle and circle sector example of a manual measuring function flexible on-screen manual measuring functions scaled overlay masks different scaled overlay masks for direct shape and dimension comparison of products and prototype samples list of already measured elements list of already measured elements for further combinations

The measuring wire ist fastened to the headstock or a special holding device, fed at the end of the base over a pulley and stretched tight with a weight (layout according to DIN 8606). The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions. When the wire is aligned to the bearing, the value display is set to zero. The straightness deviation can now be read directly on the display for each position when both parts of the image are fitted together by moving the microscope horizontally with the integrated micrometer spindle. Field of view:3 mm Measurement range:10 mm

Low load hardness tester from 1 g to 2 kg Vickers or Knoop diamond indentor manual, semi- or fully-automatic

Der RTR502BL ist ein Temperatur-Datenlogger mit externem Sensor, der schnell auf Temperaturänderungen reagiert. Er verfügt über eine große Auswahl an optionalen Sensoren mit großem Messbereich (-60℃ bis +155℃), die zusätzliche Vielseitigkeit für Ihre Situation bieten. Das Gerät ist wasserdicht nach IP64 (spritzwassergeschützt) und verfügt über eine verlängerte Batterielebensdauer von bis zu 4 Jahren. (Batterie nicht enthalten) Der RTR502BL verfügt über eine drahtlose Funkreichweite von bis zu 150 m (500 ft) mit kompatiblen Basiseinheiten. Der RTR502BL reagiert relativ schnell auf Temperaturänderungen und kann mit einer Vielzahl von Sensoren verwendet werden, wodurch er sich für die Aufzeichnung der Produkttemperatur von Flüssigkeiten und Feststoffen eignet. Er eignet sich auch zur Messung der Umgebungstemperatur in Kühl- und Gefrierschränken. Temperaturbereich:-60 bis 155°C

Das Modell TR-74Ui kann nicht nur UV-Strahlung, Beleuchtungsstärke, Temperatur und Luftfeuchtigkeit messen und aufzeichnen, sondern auch die kumulierte UV-Strahlung und Beleuchtungsstärke aufzeichnen und anzeigen. Es eignet sich hervorragend zum Schutz von Exponaten und Archiven in Museen und Bibliotheken. Das TR-74Ui wird nach dem Start der Aufzeichnung einfach an der Messstelle platziert. Die aufgezeichneten Daten können dann heruntergeladen werden, indem der Logger mit einem USB-Kabel an einen PC angeschlossen und unsere Windows-Software "Illuminance UV Recorder for Windows" verwendet wird. Die auf den PC heruntergeladenen Daten können dann mit unserer Windows-kompatiblen Software "T&D Graph" angezeigt und analysiert werden. Wenn Sie einen Datenlogger an Ihren PC anschließen, können Sie auch die aktuellen Messwerte mit unserer Windows-Software überwachen. Beleuchtungsstärke:0 bis 130klx UV-Intensität:0 bis 30mW/cm2 Temperatur:0 bis 55 °C Feuchtigkeit:10 bis 95%RH

Ispezionare visivamente e analizzare chimicamente in un'unica fase di lavoro con la vostra soluzione di analisi dei materiali DM6 M LIBS. La funzione di spettroscopia laser integrata fornisce la composizione chimica della microstruttura che si vede nell'immagine al microscopio - in un secondo. Velocizzate il vostro flusso di lavoro. Il modulo LIBS trasforma un microscopio ottico Leica in una soluzione in un unico passaggio che combina l'ispezione visiva e l'analisi chimica direttamente nel vostro spazio di lavoro. Determinate la composizione di ciò che avete identificato visivamente in pochi secondi. Utilizzate LIBS per eseguire analisi avanzate dei materiali con una velocità del 90% superiore rispetto all'ispezione con SEM/EDS. Anche la contaminazione superficiale o i rivestimenti possono essere facilmente rimossi. La mappatura chimica e la microperforazione sono ulteriori passi analitici.