Produkty dla instrumenty (54)

This small stirrer is your great ally to prepare a great variety of samples. Mixing liquids is usually required as the prior step to an analysis by ICP or AA. The homogenization of the solid samples with a binding agent is especially recommended for preparing pressed pellets, as well as the correct mixing up of the sample with borates that will later be melted using heat to obtain dissolutions or glass beads.

Accroissement de la productivité

La Trituradora de Mandíbulas EQJ-100 es un equipo de triturado especialmente diseñado para la reducción primaria de materiales semiduros, duros, frágiles y tenaces. Es capaz de triturar rápida y contundentemente vidrios, tierras, escorias, óxidos metálicos, cementos y materiales de construcción, ferroaleaciones, materiales cerámicos, minerales y rocas. Es un equipo muy robusto y sencillo, capaz de engullir y reducir muestras durante años prácticamente sin requerir mantenimiento. Reducción instantánea de muestras. Rango de trituración regulable.

2 Relés + 1 SSR de control configurables ON/OFF. PID. Zona Neutra. Smart Tuning MULTI Entrada (Pt100/PT1000/Termopar/mA/V) Humedad / Presión / Temperatura / Procesos 2 displays 4 dígitos MULTI Color 2 Relés + 1 SSR Configurables ON / OFF PID Zona Neutra Smart Tuning 1 Entrada digital Salida de Comunicación RS485 (Opcional) Configuración Parámetros: Key USB + CODE Express Frontal IP65 32×74 (x65) mm 90…240 V Modelos: QB 32 = 2 Relés + 1 SSR configurables QB 32-0 = 2 Relés + 1 SSR configurables. Con MULTI entrada Configurable PTC / NTC / Termopar / mA / V QB 32-RS = 2 Relés + 1 SSR configurables + Salida Comunicación RS485 QB 32-RMA = 1 Relé + 1 SSR configurables + 1 salida 4…20 mA QB 32-RMA-RS = 1 Relé + 1 SSR configurables + 1 salida 4…20 mA + Salida Comunicación RS485 QB 32-RAMP = 2 Relés + 1 SSR configurables + RAMPAS MULTI Entrada Universal: PTC (QB 32-0) NTC (QB 32-0) PT100 PT1000 Termopar J, K, S, R, T 0/12…60 mV 0/4…20 mA 0/1/2…5/10 V

Traitements prédictifs et préventifs des équipements

Réduction des coûts de maintenance

Top-of-floor or on table weighing platforms and units of weighing platform and weight indicator with column. Dibal MA single load cell weighing platforms, for top-of-floor or on table installation, offer a great precision for weighing applications with small and medium range (from 30 kg to 600 kg). Its stainless steel plate assures its strength and durability. These platforms can be connected to Dibal or Cely weight indicators, or Dibal manual labellers. BAV industrial bench scales consisting of a Dibal MA weighing platform, a weight indicator and a column, are ideal for basic weighing applications.

The great versatility of the new MultiEQP-100 makes of this unit an essencial instrument to treat and make metallic samples. Effective to cut, crush and punch metallic samples, it can also prepare press pellets to be analyzed by XRF. The objective of punching the samples is to obtain pins for their ulterior analysis in Elemental Analizers. The objective of the crushing is to achieve flat surfaces wide enough to undertake spark analysis. The touch-screen and the intuitive software enable the user to control easily the ample variety of operations the MultiEQP-100 features. The two magnetic sensors included in the left hand side of the working units allow the automation of all the working cycles.

Parmi les principales innovations que nous offre l’industrie 4.0, figurent les applications basées sur des systèmes robotiques.

La Prensa Peletizadora EQP-100 es capaz de ejercer una presión de hasta 40 toneladas, de un diseño robusto y duradero es funcionalmente simple, efectiva, y ofrece hasta cinco programas de trabajo con ciclos de prensado simple o doble. Realiza pellets / comprimidos de Ø 40mm exclusivamente. De un manejo muy sencillo, un cómodo display permite la regulación digital de tiempo y presión. La presión de ciclo doble permite la liberación de gases ocluidos en la muestra durante el primer ciclo asegurando pastillas de gran calidad.

The EQP-200 Pellet Press has been especially designed to obtain high quality pellets/tablets for XRF. This press can exert a pressure of up to 40 tons. Of durable and robust design, it is very easy to manage, efficient, and offers 5 working programs with single and double pressing cycles. An exceptional instrument. Keeping all the features of its predecessor (EQP-100), the EQP-200 also offers the possibility of making pellets of different diameters, just by changing the pressing tool. This device facilitates also the cleaning and maintenance tasks. Its versatility enables the unit to work also with different shapes of press tools, such as square, rectangular, etc.

The EQR-200 Vibratory Disc Mill is a milling equipment especially designed to obtain analytical granulometries of a great variety of samples, such as glass, earths, slags, metallic oxides, cements, ferroalloys, ceramic materials, amongst other. This unit is able to mill in no time an ample range of different materials, from the semi-soft to the hardest, fragile and fibrous. All the processes can be controlled via a digital full color screen. User-friendly and robust, it is a practically maintenance free equipment. Quick, easy to use, robust and efficient, it is also quite noiseless thanks to a careful acoustic insulation.

The EQP-1 Pellet Press can exert a pressure of up to 15 tons, it is very easy to use, and takes very little space. An hydraulic systems increases the strenght applied by the user with the lever and a and an analogical gauge shows the pressure tons reached. • High quality pellets in no time • User-friendly • Does not need electrical power • Analogical gauge • Compact and autonomous unit

The EQM-402 Mixer Mill is a great ally when preparing samples for analysis, as it can mill, mix and homogenize quickly small volumes of sample. Especially designed for the final preparation of small quantities of hard, semi-hard and fragile samples - up to 50 ml -. This unit is able to prepare two samples simultaneously and to reduce them from an initial size of 0.8 a 1.5mm to a grain size of less than 10μ in a short time – 1 to 4 minutes -.

The EQJ-100 Jaw Crusher is a crushing unit especially designed for the primary reduction of semi-hard, hard, fragile and tough materials. It can quickly and strongly crush glass, earths, slags, metallic oxides, cements and construction materials, ferroalloys, ceramic materials, minerals and rocks. This is a very robust and simple unit, able to take in and reduce samples for years without practically needing any type of maintenance. Instant reduction of samples. Adjustable crushing size range.

Une machine qui charge des panneaux pour les envoyer à la machine à scier

Un système robotisé dédié au conditionnement des tableaux magnétiques et de leurs accessoires de montage.

Hybrid single load cell top-of-floor weighing platforms. Dibal HS hybrid weighing platforms, for floor installation, combine the advantages of a large stainless steel plate with the easy maintenance of a single load cell. These platforms are suitable for medium and long range weighing applications (from 300 kg to 3,000 kg).

These units have been especially designed to make glass beads (by Lithium Borates) for XRF and to undertake dissolutions (using acids) for AA and ICP. This is a modular unit. You can start with a single working unit and then always be able to increase the capacity of the same adding up to two more working units, all controlled from a single PC. Being highly automated units, it is possible to control and monitor in real time each step of the fusion process, from one to three samples, simultaneously or independently. The FX Series is one step ahead of the units of its generation, as it heats homogeneously, quickly and efficiently, by electrical induction, without flame and not needing any direct contact. Each of the modules can work synchronized with the others or independently with a different program each, for example when preparing samples of different nature.

Une machine de découpe spécialement conçue pour l’industrie chimique

The status of the Platinumware to make glass beads has got a great influence in the final result of the analysis by XRF. Apart from improving and facilitating the time needed to prepare the samples. Equilab introduces EQ-PUL Polishing Unit, especially designed to offer a firm hold of the different pieces so they can be conveniently sanded and polished. This unit can apply up to 8 selectable turning speeds. It is a small, user-friendly and very versatile unit.

Notre principal objectif est d’offrir à nos clients les outils et les connaissances nécessaires pour s’adapter aux nouvelles méthodes de travail. Pour ce faire, nous intégrons et appliquons à nos automatisations un logiciel intelligent.

The EQP-30 Manual Pellet Press can exert a pressure of up to 30 tons. It is a robust and durable unit, very easy to use. An hydraulic system multiplies the strenght applied by the user with the lever, and an analogical gauge shows the pressure tons reached. This press includes a safety system that automatically releases pressure above 30 tons. By using varied pressing tools, we can obtain pellets of different diameters.

Top-of-floor or on table weighing platforms and units of Dibal ME weighing platform and weight indicator with column. Dibal ME single load cell weighing platforms with stainless steel plate are perfect for top-of-floor or on table installation. They offer a great precision and durability for weighing applications with small and medium range (from 6 kg to 600 kg). These platforms are connectable to Dibal or Cely weight indicators and Dibal manual labellers. BEV industrial bench scales consisting of a Dibal ME weighing platform, a weight indicator and a column, are ideal for basic weighing applications.