Produkty dla instrumenty (251)

QAL1 approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes. Measured parameters:Dust Technology:ProScatter™ Forward Scatter Measurement/Monitoring capability:0-1000 mg/m³ Stack/Duct diameter suitability:up to 8m Flue gas temperature:up to 500°C Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes

Filter leak monitor suited to filter control applications after fabric dust filter type (baghouse) arrestment plant. Measured parameters:Dust Technology:Electrodynamic™ Probe Electrification Measurement/Monitoring capability:0-500 mg/m3 (Leak monitoring) Stack/Duct diameter suitability:0.5 to 8 m Flue gas temperature:250°C standard, 400°C option Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes

Microwave sensor for contactless monitoring of material flows with trend monitoring. • detection of material clogging and material standstill • insensitive against material deposits • for any line diameter • compact (no separate electronics) • with ceramic mounting, usable up to 1,000 °C • usable in dust exzones

US EPA PS11 capable ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Measured parameters:Dust Technology:Extractive ProScatter™ Forward Scatter Measurement/Monitoring capability:0-500 mg/m³ Stack/Duct diameter suitability:up to 15m Flue gas temperature:up to 200°C Wet Electrostatic Precipitator (WESP):Yes Wet Scrubber:Yes QA checks:Yes

Standard Reference CLD method for low & ultra low NOx measurement, IRGFC for CO, CO2, SO2, N2O, NOx, HF, HCl, TOC and O2 in a single analyse. Fast and simultaneous measurements of up to 10 gases. • measurement of dry and corrosive samples • unheated sample line • intrinsic security with onboard residual H2O measurements • onboard oxygen measure for environmental reporting • highly accurate, excellent stability with automatic optical stability check

Vermeidet durch die Verwendung des UV-Bereichs für die Messung von NH3 Interferenzen mit anderen wichtigen Emissionsgasen (CO, CO2, H2O, usw..), die im UV nicht absorbieren. Messbereich:0-100 / 0-500 ppm Nachweisgrenze:0.4 ppm Reaktionszeit:< 2 sec (T90) Null-Drift:< 2% F.S. / 24 h Messbereichs-Drift:2 % F.S. / 24 h Linearität:± 1 % F.S. Ultraschnelle Reaktionszeit:< 2 Sekunden

Multigas-Infrarot-Analysator für Messungen niedriger CO-Konzentrationen (0-10 bis 0-50 ppm). Messbereich:CO: 10 bis 50,000 ppm, CO2: 100 bis 250,000 ppm, O2: 0 bis 25%v Reaktionszeit (0-90 %):2 sek. Temperaturbereich :+15°C bis + 40°C

QAL1 zertifizierte Emissionsmessung für Staubkonzentrationen aus industriellen Prozessen mit einem Zertifizierungsbereich von 0-7,5 mg/m³. Messbare Parameter:Staub Technologie:ProScatter Rückwärtsstreuung Messbereich:<0 – 500 mg/m³ Eignung für Durchmesser:bis zu 10 m Rauchgastemperatur:bis zu 400 °C Taschenfilter:Ja Kartuschenfilter:Ja Zyklone:Ja Elektrofilter (ESP):Ja

The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission measurement. • continuous, precise and reliable dust quantity measurement (mg/m³) • dust measurement possible in large channel diameters • output of dust concentration as absolute value • ATEXcertified • measurement of dust concentration at high temperatures or harsh environments • trend signal or absolute value

Mikro-Sensor für die präzise und zuverlässige Messung von nmVOC. Messbarer Parameter:nmVOC Messbereich:0 – 2 | 0 – 16 Zertifizierte Nachweisgrenze (ppm):0.2 | 0.5 Auflösung (ppm):0.001

The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases.

QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). Measuring principle:Thermocatalytic reduction at stack, Amalgamation (MI GoldTrap), cold vapor atomic absorption (CVAAS) Measured component:Total mercury UV-Source:Electrodeless low pressure mercury lamp (EDL) Stabilization method:Reference beam method Measuring ranges:0.05 μg/m³ – 500 μg/m³ Hg (up to 1000 µg/m³ as an option) Detection limit:0.0001 μg/m³ (Detector); < 0.01 μg/m³ (System)

LED based, UV photometric ozone analyzer providing accurate, stable and repeatable O3 measurements in the range of 0-500 ppb or 0-10 ppm. Measured parameter:O₃ Technology:UV photometry & LED US-EPA Approval / QAL 1 Certification:Yes Measurement ranges:0-1 ppm / 0-10 ppm Measurement units:ppb, ppm, µg/m3 (user-selectable) Lower Detectable Limit (2σ):0.2 ppb Noise (σ):0.1 ppb Zero drift:< 0.5 ppb / 24h, < 1 ppb / 7 days Span drift:< 0.5% / 24h, < 1% / 7days Linearity:± 1% FS Sample flow rate:1L/min

This accessory is meant for manually calibrating the UT-3000 Mercury Ultratracer. Purity of contained Hg:99,999999% Accuracy of T-sensor:0,01 °C Power supply:230 VAC / 50 Hz (110 VAC / 60 Hz option) Power consumption:30 VA

Continuous particulate monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation plants. Measured parameters:Dust Technology:Extractive ProScatter™ Forward Scatter Measurement/Monitoring capability:0-500 mg/m³ Stack/Duct diameter suitability:up to 15m Flue gas temperature:up to 200°C Wet Electrostatic Precipitator (WESP):Yes Wet Scrubber :Yes

Standalone TÜV approved filter dust monitor suited to the measurement of filter emissions after bag houses, cartridge filters, cyclones etc. • reliable measurement of leaking and broken bags in dust collectors • external display and keyboard • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Beta Messgerät mit optionalem OPM (Optischer Partikelsensor). Präzises Messgerät zur Überwachung der Beta-Dämpfung von PM10, PM2,5, PM1. Optische Echtzeit-Anzeige der Massenkonzentration unter Verwendung eines unabhängigen Einlasses. Messbare Parameter:PM10, PM2.5, PM1, TSP Technologie:Beta-Strahlen-Dämpfung QAL1 Zertifizierung:Ja US-EPA Zulassung:Ja Messbereich:bis zu 10 000 μg/m3 Messbare Einheit:µg/m3

Messung von Kohlenwasserstoffen (THC, CH4, nmHC) in der Umgebungsluft unter Verwendung eines Flammenionisationsdetektors (FID). Messbare Parameter:THC / nmHC Technologie:Flammenionisationsdetektor (FID) Messbereiche:0-10 ppm / 0-1000 ppm Messeinheiten:ppb, ppm, µg/m3 (frei wählbar) Nachweisgrenze (2σ):< 0.05 ppm Rauschen (σ):0.025 ppm

The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:nmVOC Measuring Range (ppm):0 – 2 | 0 – 16 Certified Detection Limit (ppm):0.2 | 0.5 Resolution (ppm):0.001 Operating Temperature (°C):-20 to 50

The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases. Measuring principle:cold vapor atomic absorption (CVAAS) at 253.7 nm UV-Source:Electrodeless low pressure mercury lamp (EDL) Stabilization method:Reference beam method Optical cell:Fused silica (Suprasil), l: approx. 230mm, heated approx. 45° Measured component :Total Gaseous Mercury (TGM) Measuring ranges (Standard version):1 – 100; 1- 1000; 1 – 2000 µg / m³

Microwave barrier for contactless detection of dry bulk solids in containers, pipes or chutes. Reliable fill level and limit detection. • simple retrofitting • detection through all nonconductive walls • up to 1,000 °C possible with ceramic mounting • insensitive to material caking • usable for profiles up to 25 m

Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Measured parameters:Flue-gas velocity Technology:Micro-venturi Measurement/Monitoring capability:3 – 30 m/s Stack/Duct diameter suitability:300 mm up to 1,5 m Flue gas temperature: up to 400 °C Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes Wet Electrostatic Precipitator (WESP):Yes

PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory analysis. Measured parameter:Particulates Technology:Sampling Temperature range:+5°C to +40°C Data storage:> 6 months Included I/O:4 AI/4 AO/4 RC/6 DC

Gasmonitor auf CLD-Basis für die Messung von NO, NO2 und NOx im Bereich von 0-1 ppm oder 0-10 ppm. Messparameter:NO, NO₂, NOx Technologie:Chemiluminescence QAL1 Zertifizierung:Ja US-EPA Zulassung:Ja Messbereich:0-1 oder 0-10 ppm Messeinheiten:ppb, ppm, µg/m3 (benutzerdefiniert) Kleinster Erfassungsbereich (2σ):< 0.2 ppb Rauschen (σ) :0.1 ppb

Multisensor dust monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zones. Advanced probe electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Ecodesigned, ultracompact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler or gas from different industrial furnaces and process applications. It offers superior metrological performances for the simultaneous multigas measurement of NOx, SO2, CO, O2, residual H2O, CO2, CH4 and N2O (greenhouse gases). • ultralow power consumption • no compressed air required • insensitive to T° variations in the range +5 °C to +40 °C • proactive, userfriendly remote communication • highly accurate, excellent stability, economical, easy and reduced maintenance

Einzelreaktionskammer-Version für die Überwachung von NO oder NOx oder Doppelkammerversion für NO-, NOx- und NO2-Messungen. QAL1 zertifiziert, nach EN 15267-3:Nein Einhaltung der US EPA:Ja Probenahme-Technologie:Heiß-/Nass-Extraktion Probenahme-Transport:180°C beheizte Probenahmeleitung Referenzgas-Eindüsung:Ja, am Analysegerät oder an der Probenahmestelle Built-In O2 option:Nein

CLD based gas monitor offering superior performances for the measurement of NO, NO2 and NOx criteria pollutants in the range 0-1 ppm or 0-10 ppm. Optional NH3 monitoring. Measured parameter:NO, NO₂ & NOx (NH3 optional) Technology:Chemiluminescence US-EPA Approval / QAL 1 Certification:Yes Measurement ranges:0-1 or 0-10 ppm Measurement units:ppb, ppm, µg/m3 (user-selectable) Lower Detectable Limit (2σ):< 0.2 ppb Noise (σ):0.1 ppb Zero drift:< 1 ppb / 24h Span drift:< 1% / 7 days Linearity:1%

Multikanalsystem, das die Verteilung von zwei, drei oder vier Rauchgaskanälen an ein Gasüberwachungssystem (GMS) ermöglicht. Betriebstemperatur:+5°C bis +40°C Kommunikation:RS232/RS422, Ethernet

Continuous velocity measurement in tube version for careful material transport. Measures in full crosssection. • continuous speed measurement of solids in metal pipes • measurement directly in the conveying stream/entrained flow • measurement completely independent of material • sensor is made accordingly to the existing pipe diameter • measurement without product contact