Produkty dla instrumenty (195)

A simple solution to identify failure of a fabric filter baghouse, cartridge filters or cyclones. Ideally suited to applications from 0.1 mg/m³, it provides an immediate alarm in case of a filter break. • detects all dust types • relay alarm output • usable in clean gas and any metallic dust channels • very simple and fast retrofitting • immediate detection of filter damages • simple commissioning (plug & play) • excellent price/performance ratio

Single reaction chamber version for the monitoring of NO or NOx, or dual chamber for NO, NOx and NO2 measurements. • heated analyzer (temperature controlled up to 180 °C) • measurement of wet and corrosive samples • proven EPA reference method • CLD technique for continuous and simultaneous measurement of NO, NO2 and NOx • in compliance with EN 14792 • fast response time (< 2 sec.)

Gas monitor for fast, precise, direct and continuous measurement of NO2 concentrations in the range 0-1000 ppb. Measured parameter:NO₂ Technology:CAPS (Cavity Attenuated Phase Shift Spectroscopy) US-EPA Approval / QAL 1 Certification:Yes Measurement ranges :0-1 ppm Measurement units:ppb, ppm, µg/m3 (user-selectable) Lower Detectable Limit (2σ):0.1 ppb Noise (σ):0.05 ppb Zero drift:0.75 ppb/24h Span drift:1.5 ppb/12h Linearity:< 4%

Beheizter Multi-Gas NDIR-GFC-Analysator zur Emissionsüberwachung in korrosiven Anwendungsbereichen, auch für DeNOx (SCR / SNCR) und zur Optimierung von Rauchgasbehandlungsprozessen. Heiß/Nass-Extraktiv für die gleichzeitige Messung von: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 und H2O. QAL1 zertifiziert, nach EN 15267-3:Ja US EPA Konform:Ja Probenaufbereitung:Heiß/Nass Extraktiv Entnahmeleitung:Entnahmeleitung beheizt 180°C Kalibriergas:Ja, an Entnahmeeinheit oder Analysator Built-In O2 Option:Ja Serielle Schnittstelle:RS232 / RS422

US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Measured parameters:Dust Technology:ProScatter™ Forward Scatter Measurement/Monitoring capability:0-200 mg/m³ Stack/Duct diameter suitability:up to 8m Flue gas temperature:up to 500°C Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes

Biogenic or carbon-neutral stack CO2 gas can be deductible from any company’s greenhouse gas inventory which is required for reporting under various regulations.

Wind speed measurement sensors The device measures wind speed and direction and is powered by its integrated solar panel. It also has a rechargeable lithium battery. Wind speed range:1 – 40 m/s Wind speed resolution:1 m/s Wind speed sensitivity:0.13 m/s Wind direction range:0 – 359 ° Wind direction resolution:10 ° Wind direction sensitivity:+/- 1.5 °

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks probe check option for improved data integrity reduces filter maintenance intervals, process downtimes and filter costs

The dry extractive SEC™ system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line.

Automatisch Null-, Präzisions-, Messbereichs- und Mehrpunktkalibrierungen mit NO, NO2, SO2, CO, O3, Kohlenwasserstoffen und anderen Gasen. US-EPA Zulassung:Ja

Robuste und zuverlässige Leckageüberwachung von Filtern unter Verwendung der ElectroDynamic Technologie. Zu messendes Material :Staub Technologie:ElectroDynamic™ Sondenelektrifizierung Mess-/Überwachungskapazität:0-500 mg/m3 (Leckageüberwachung) Kamin-/Kanaldurchmessers:0,5 bis 8 m Abgastemperatur:250°C Standard, 400°C Option Schlauchfilter :Ja Patronenfilter:Ja Keramikfilter :Ja Koaleszenzfilter:Ja Zyklon:Ja

The HOFI™ BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases.

QAL1-zertifizierter und US-EPA-zugelassener UV-photometrischer Ozon-Analysator für exakte, stabile und reproduzierbare O3-Messungen im Bereich von 0-500 ppb oder 0-10 ppm. Messgröße:O3 Technologie:UV Fotometrie & LED QAL1 Zertifizierung:Ja US-EPA Zulassung:Ja Messbereiche:0-1 ppm / 0-10 ppm Messeinheiten:ppb, ppm, µg/m3 (benutzerdefiniert) Untere Nachweisgrenze (2σ):0.2 ppb Rauschen (σ) :0.1 ppb

Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no venturi or similar conversions are required. • easy to retrofit • no calibration necessary • output in operating cubic metres • suitable for all diameters and geometries

Non-dispersive infrared carbon monoxide analyzer for CO measurements in the range of 0-50ppm, CO2 monitoring optionally available. CO:0-300 / 6000 ppb CO2:0-20 % Sampling technology:Dilution Sample transfer:Non heated polytube Back flush function:Yes Span injection:Yes

Einer der wenigen QAL 1-zertifizierten FID-Analysatoren auf dem Markt, auch als tragbare Version verfügbar, zur Messung von: Gesamt-C (TOC, VOC, THC) oder gleichzeitig Gesamt-C, nmHC und CH4. Verwendet einen Flammen-Ionisations-Detektor (FID), die empfindlichste und am weitesten verbreitete Technologie für die Messung von: Gesamte Kohlenwasserstoffe (THC)/Nicht-methanische Kohlenwasserstoffe (NmHC)/Methan (CH4). Parameter:Messbereich (ppm) CH4:0-10 / 10000 Gesamt-C (TOC):0-10 / 10000 QAL1 zertifiziert, nach EN 15267-3 :Ja US EPA Konformität:Ja Probenentnahme:Heiß/Nass Extraktiv Entnahmeleitung:Beheizt 180°C Kalibriergaseingang:Ja, am Analysator und Entnahmeeinhei Built-In O2 Option:Nein

Approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to gas and dust CEMS. Measured parameters:Flue-gas velocity Technology:FlueSonic™ Ultrasonic Measurement/Monitoring capability:0 – 50 m/s Stack/Duct diameter suitability:up to 10 m Flue gas temperature:up to 200 °C Baghouse:Yes Cartridge Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes Wet Electrostatic Precipitator (WESP):Yes Wet Scrubber:Yes QA checks:Yes

Referenz-Luftqualitäts-Überwachungssystem für CO-Messungen im Bereich 0-50 ppm. Optional kann CO2 überwacht werden. Messgröße:CO Technologie:Gasfilter-Korrelation – NDIR QAL 1 Zertifizierung:Ja US-EPA Zulassung:Ja Messbereiche:0-50 ppm (0-300 ppm auf Anfrage) Messeinheiten:ppb, ppm, µg/m3 (benutzerdefiniert) Untere Nachweisgrenze (2σ):0.05 ppm Rauschen (σ):0.025 ppm

The Cairsens© O2 + NO3 sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:O3 + NO2 Measuring Range (ppm):0 – 0.25 Certified Detection Limit (ppm):0.02 Resolution (ppm):0.001 Operating Temperature (°C):-20 to 40

Ultra-fast NH3 measurement (Ultra-fast response time: < 2 seconds). Ranges:0-100 / 0-500 ppm Lower detectable limit:0.4 ppm Response time:< 2 sec (T90) Zero drift:< 2% F.S. / 24 h Span drift:2 % F.S. / 24 h Linearity :± 1 % F.S. Sample flow rate:0.1 to 5 l/min Heated block temperature :190°C Operating temperature :+5 to +45°C Communication:RS 232

Ideal für mittelhohe bis hohe Konzentrationen, auch in explosionsgefährdeten Bereichen und zur Verwendung mit AC32e, CO12e, AF22e, HC51M oder MIR 9000. Temperaturbereich Standard:+ 400 °C Temperaturbereich Quartzsonde:+ 600 °C Verdünnungsrate:12/1 bis 350/1 Genauigkeit der Verdünnungsrate:± 2 %

Gaschromatographie in Verbindung mit einem Photoionisationsdetektor zur Messung von organischen Verbindungen wie Benzol, Toluol, Ethylbenzol, m+p-Xylol, o-Xylol, 1-3 Butadien. Messbare Parameter:VOC (Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1,3 Butadiene) Technologie:Gaschromatographie QAL1-Zertifikat:Ja US-EPA Zulassung:Ja Messbereich:0-1000 µg/m3 Messeinheit:ppb, ppm, µg/m3 (frei wählbar) Nachweisgrenze (2σ):≤ 0.025% µg/m3 at 0.5 µg/m3 benzene Rauschen (σ):≤ 0.5%

Sensor for continuous moisture measurement in dry bulk solids and installation on conveyor belts, screw feeder or hoppers. Microwave based sensor for high resolution and accuracy. • highly resistant to abrasion • extended measurement range, up to 85 % moisture • high temperature version up to 190 °C • measurement accuracy 0.1 % • recording of surface moisture and capillary moisture

QAL1 approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes. Measured parameters:Dust Technology:ProScatter™ Forward Scatter Measurement/Monitoring capability:0-1000 mg/m³ Stack/Duct diameter suitability:up to 8m Flue gas temperature:up to 500°C Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes

Filter leak monitor suited to filter control applications after fabric dust filter type (baghouse) arrestment plant. Measured parameters:Dust Technology:Electrodynamic™ Probe Electrification Measurement/Monitoring capability:0-500 mg/m3 (Leak monitoring) Stack/Duct diameter suitability:0.5 to 8 m Flue gas temperature:250°C standard, 400°C option Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes

Microwave sensor for contactless monitoring of material flows with trend monitoring. • detection of material clogging and material standstill • insensitive against material deposits • for any line diameter • compact (no separate electronics) • with ceramic mounting, usable up to 1,000 °C • usable in dust exzones

US EPA PS11 capable ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Measured parameters:Dust Technology:Extractive ProScatter™ Forward Scatter Measurement/Monitoring capability:0-500 mg/m³ Stack/Duct diameter suitability:up to 15m Flue gas temperature:up to 200°C Wet Electrostatic Precipitator (WESP):Yes Wet Scrubber:Yes QA checks:Yes

Standard Reference CLD method for low & ultra low NOx measurement, IRGFC for CO, CO2, SO2, N2O, NOx, HF, HCl, TOC and O2 in a single analyse. Fast and simultaneous measurements of up to 10 gases. • measurement of dry and corrosive samples • unheated sample line • intrinsic security with onboard residual H2O measurements • onboard oxygen measure for environmental reporting • highly accurate, excellent stability with automatic optical stability check

Vermeidet durch die Verwendung des UV-Bereichs für die Messung von NH3 Interferenzen mit anderen wichtigen Emissionsgasen (CO, CO2, H2O, usw..), die im UV nicht absorbieren. Messbereich:0-100 / 0-500 ppm Nachweisgrenze:0.4 ppm Reaktionszeit:< 2 sec (T90) Null-Drift:< 2% F.S. / 24 h Messbereichs-Drift:2 % F.S. / 24 h Linearität:± 1 % F.S. Ultraschnelle Reaktionszeit:< 2 Sekunden

Multigas-Infrarot-Analysator für Messungen niedriger CO-Konzentrationen (0-10 bis 0-50 ppm). Messbereich:CO: 10 bis 50,000 ppm, CO2: 100 bis 250,000 ppm, O2: 0 bis 25%v Reaktionszeit (0-90 %):2 sek. Temperaturbereich :+15°C bis + 40°C