Produkty dla instrumenty (430)

The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases. Measuring principle:cold vapor atomic absorption (CVAAS) at 253.7 nm UV-Source:Electrodeless low pressure mercury lamp (EDL) Stabilization method:Reference beam method Optical cell:Fused silica (Suprasil), l: approx. 230mm, heated approx. 45° Measured component :Total Gaseous Mercury (TGM) Measuring ranges (Standard version):1 – 100; 1- 1000; 1 – 2000 µg / m³

Microwave barrier for contactless detection of dry bulk solids in containers, pipes or chutes. Reliable fill level and limit detection. • simple retrofitting • detection through all nonconductive walls • up to 1,000 °C possible with ceramic mounting • insensitive to material caking • usable for profiles up to 25 m

Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Measured parameters:Flue-gas velocity Technology:Micro-venturi Measurement/Monitoring capability:3 – 30 m/s Stack/Duct diameter suitability:300 mm up to 1,5 m Flue gas temperature: up to 400 °C Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes Wet Electrostatic Precipitator (WESP):Yes

PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory analysis. Measured parameter:Particulates Technology:Sampling Temperature range:+5°C to +40°C Data storage:> 6 months Included I/O:4 AI/4 AO/4 RC/6 DC

Gasmonitor auf CLD-Basis für die Messung von NO, NO2 und NOx im Bereich von 0-1 ppm oder 0-10 ppm. Messparameter:NO, NO₂, NOx Technologie:Chemiluminescence QAL1 Zertifizierung:Ja US-EPA Zulassung:Ja Messbereich:0-1 oder 0-10 ppm Messeinheiten:ppb, ppm, µg/m3 (benutzerdefiniert) Kleinster Erfassungsbereich (2σ):< 0.2 ppb Rauschen (σ) :0.1 ppb

Multisensor dust monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zones. Advanced probe electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Ecodesigned, ultracompact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler or gas from different industrial furnaces and process applications. It offers superior metrological performances for the simultaneous multigas measurement of NOx, SO2, CO, O2, residual H2O, CO2, CH4 and N2O (greenhouse gases). • ultralow power consumption • no compressed air required • insensitive to T° variations in the range +5 °C to +40 °C • proactive, userfriendly remote communication • highly accurate, excellent stability, economical, easy and reduced maintenance

Einzelreaktionskammer-Version für die Überwachung von NO oder NOx oder Doppelkammerversion für NO-, NOx- und NO2-Messungen. QAL1 zertifiziert, nach EN 15267-3:Nein Einhaltung der US EPA:Ja Probenahme-Technologie:Heiß-/Nass-Extraktion Probenahme-Transport:180°C beheizte Probenahmeleitung Referenzgas-Eindüsung:Ja, am Analysegerät oder an der Probenahmestelle Built-In O2 option:Nein

CLD based gas monitor offering superior performances for the measurement of NO, NO2 and NOx criteria pollutants in the range 0-1 ppm or 0-10 ppm. Optional NH3 monitoring. Measured parameter:NO, NO₂ & NOx (NH3 optional) Technology:Chemiluminescence US-EPA Approval / QAL 1 Certification:Yes Measurement ranges:0-1 or 0-10 ppm Measurement units:ppb, ppm, µg/m3 (user-selectable) Lower Detectable Limit (2σ):< 0.2 ppb Noise (σ):0.1 ppb Zero drift:< 1 ppb / 24h Span drift:< 1% / 7 days Linearity:1%

Multikanalsystem, das die Verteilung von zwei, drei oder vier Rauchgaskanälen an ein Gasüberwachungssystem (GMS) ermöglicht. Betriebstemperatur:+5°C bis +40°C Kommunikation:RS232/RS422, Ethernet

Continuous velocity measurement in tube version for careful material transport. Measures in full crosssection. • continuous speed measurement of solids in metal pipes • measurement directly in the conveying stream/entrained flow • measurement completely independent of material • sensor is made accordingly to the existing pipe diameter • measurement without product contact

Perfect ammonia gas analyzer or multigas analyzer for the measurement in hot & wet fluegas of HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and H2O. Heated MultiGas NDIRGFC analyzer for emission compliance and analysis of wet sample gases in corrosive applications, including DeNOx (SCR / SNCR) and for the optimization of flue gas treatment processes. • temperature maintained at 180 °C • measurement of raw and purified flue gas for desulfurization • measurement of wet and corrosive samples • no nitrogen required for calibration • QAL1 certified analyzer • remote access for all analyzer functions • low maintenance and low consumables requirement

Kontinuierliche Überwachung von Quecksilberkonzentrationen in Wasser und wässrigen Lösungen von industriellen Prozessen in rauen Bedingungen. Messprinzip:Amalgamierung an MI Goldfalle (nur PA-2 Gold); Kaltdampf UV-Absorption (CVAAS) bei 253,7 nm UV-Quelle:Elektrodenlose Hg-Niederdrucklampe (EDL) Stabilisierung:Referenzstrahl-Technik Optische Zelle:Quarzglas Messbereich PA-2:0.1 … 1 µg/l bis 0…10 mg/l Messbereich PA-2 Gold:0.01 … 1 μg/l bis 0.1 … 10 μg/l Empfindlichkeit:> 0.01 µg/l Ansprechzeit:ca. 1 Minute Gasfluss :ca. 20 l/h

Pure air generator, capable of continuous delivery of up to 20 standard liters per minute (SLPM) of dry, contaminant-free air.

The Dusty C has been specially developed to monitor clean sides after filters with high reliability and without time delay for filter breaks. It can be used in metallic ducts in which dust particles will be detected in the gas flow. Its area of application begins at dust levels of 0.1 mg/m3. • detects all dust types • can be used in all purge gas and dust ducts • immediate detection of filter damages • simple commissioning (plug & play) • can be used in ex zones • individual choice of alarm level • rapid and easy retrofitting

Stand alone cross stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. • emissions measurement (mg/m³) • advanced sensor design includes automatic drift checks • resistant to contamination • simple installation, setup and maintenance • external display and keyboard for easy setup • can be purged with instrument air providing lower cost of ownership • lower level of maintenance than traditional opacity systems • mg/m³ output, once calibrated

Continuous solids mass flow measurement in densestream conveying and high levels of throughput. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • unlimited throughput volumes can be measured • no wear thanks to the ceramic inner pipe • simple retrofitting • maintenancefree

The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates.

QAL1 zertifizierter und US-EPA zugelassener nicht-dispersiver Infrarot-Kohlenmonoxid-Analysator für CO-Messungen im Bereich von 0-50 ppm. CO:0-300 / 6000 ppb CO2:0-20 % Technologie:Verdünnung Entnahmeleitung:Unbeheizter Polytube Funktion Rückspülung:Ja Kalibriergaseingang:Ja

Echtzeit-Luftqualitätsüberwachung mit bis zu sechs Mikrosensoren, autonom und netzwerkfähig. Messung von H2S/CH4S, NH3, nmVOC, O3+NO2, NO2, CO, SO2, PM10, PM2.5 & PM1 möglich. H2 S / CH4S:0-1,000, 0-20,000, 0-200,000 ppb NH3:0-25,000 ppb nmVOC:0-16,000, 0-2,000 ppb O3 + NO2:0-250 ppb NO2:0-250 ppb CO:0-20,000 ppb SO2:0-1,000 ppb PM10/PM2.5/PM1:0-1,000 µg/m3

QAL1 approved particulate CEM for opacity monitoring from combustion stacks. Measured parameters:Dust Technology:Opacity Measurement/Monitoring capability:0-100% Stack/Duct diameter suitability:up to 10m Flue gas temperature:up to 600°C Baghouse:Yes Electrostatic Precipitator (ESP):Yes

Plug & Play Lösung zur Verwendung mit beheizten Analysegeräten wie MIR FT, MIR 9000H, Graphit 52M und Topaze 32M. HOFI Heiztemperatur:180-190 °C Primärfilter (in der Sonde):20 μm (je nach Sondentyp) Feinfilter (in der Box):0.5 μm Durchfluss:30 bis 120 l/h

Electromagnetic flowmeter, designed to measure bulk material flows up to 300 t/h. The meter has no mechanical parts in the flow, is 100% dustproof and erosion free because of ceramic inner pipe. • arbitrary mounting position (inclined/free fall) • low headroom required • easy to calibrate

Staubsensor für die kontinuierliche Partikelüberwachung durch extraktive Probenahme und Messung in Anwendung mit feuchte-gesättigten Rauchgasen. Messbare Parameter:Staub Technologie:Extraktiver ProScatter Vorwärtsstreuung Messbereich:0-500 mg/m³ Durchmesser Abgaskanal:bis zu 15 m Rauchgastemperatur:bis zu 200 °C Nass-Elektrofilter (WESP):Ja Nasswäscher:Ja

Der Ultratracer misst zuverlässig Gesamt-Hg (Total Gaseous Mercury TGM) in Luft und anderen Gasen selbst im Ultraspurenbereich (sub-ng/m³) gemäß EN 15852. Messprinzip:Amalgamierung (MI Goldfalle), Kaltdampf-Atomabsorption (CVAAS) bei 253,7 nm Messkomponente:ΣHg (Total Gaseous Mercury TGM) UV-Quelle:Elektrodenlose Hg-Niederdrucklampe (EDL) Stabilisierung:Referenzstrahl-Technik Optische Zelle:Quarzglas

Kompakter Durchflussmesser für die Rauchgasgeschwindigkeits-, Volumenstrom- und Schadstoffmassenfreisetzungsberechnung bei Gas- und Staubmessungen. Messbare Parameter:Rauchgasgeschwindigkeit Technologie:Mikro-Venturi Messbereich:3 – 30 m/s Kamin-/Kanalgröße:300 mm bis zu 1,5 m Temperaturbereich: bis zu 400°C Gewebefilter:Ja Kartuschenfilter:Ja Keramikfilter:Ja Koaleszenabscheider:Ja Zyklon:Ja Elektrofilter (ESP):Ja Nass-Elektrofilter (WESP):Ja Nasswäscher:Ja

Auf Basis der FID Technologie misst der Analysator HC51M Kohlenwasserstoffe (THC, CH4, nmHC) in der Umgebungsluft im Bereich von 0-1000 ppm. CH4:0-150 / 3500 ppb THC:0-400 / 4000 ppb nmHC:0-400 / 4000 Technologie:Verdünnung Entnahmeleitung:Polytube unbeheizt Kalibriergaseingang:Ja

Approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to gas and dust CEMS. Measured parameters:Flue-gas velocity Technology:ProPitot™ Averaging Pitot Measurement/Monitoring capability:3 – 50 m/s Stack/Duct diameter suitability:up to 8 m Flue gas temperature:up to 800 °C Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes Wet Electrostatic Precipitator (WESP):Yes

Multi-Gas-NDIR-GFC-Analysator (Nicht-dispersive Infrarot-Gasfilterkorrelation), der bis zu zehn Gase gleichzeitig misst, darunter Stickstoffoxid (NO), Stickstoffdioxid (NO2), Schwefeldioxid (SO2), Kohlenmonoxid (CO), sogar Chlorwasserstoff (HCl) und Fluorwasserstoff (HF). Ermöglicht die gleichzeitige und kontinuierliche Messung mit Probenahme auf Trockenbasis. AL1 Zertifiziert nach EN 15267-3:Ja US EPA Compliance:Ja Probenahme:Kalt/Trocken -Extraktiv Probenahmetransfer:Polytube unbeheizt

QAL1-zertifizierter VOC-Monitor zur Gaschromatographie (GC) gekoppelt mit einem PID-Detektor. Messbare Parameter:VOC (Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1,3 Butadiene) Technologie:Gaschromatographie QAL1-Zertifikat:Ja Messbereich:0-1000 µg/m3 Messeinheit:ppb, ppm, µg/m3 (frei wählbar) Nachweisgrenze (2σ):≤ 0.025% µg/m3 at 0.5 µg/m3 benzene Rauschen (σ):≤ 0.5%