Produkty dla instrumenty (291)

Il peut être utilisé pour le tibia, le fémur et l’humérus en première indication dans les cas de fractures ouvertes, d’allongement osseux sur clou, pour remplacer un fixateur externe, dans le traitement des infections ostéo articulaires. Il peut aussi être utilisé pour l’arthrodèse du genou ou de la cheville.

Clous pour ostéosynthèse standard et sur mesure vendus stériles et non stériles. Conception, fabrication et négoce d’implants orthopédiques mais aussi de divers matériels chirurgicaux. Pour mieux répondre aux besoins de notre clientèle, nous étudions toute demande concernant des produits spécifiques.

Broches pour ostéosynthèse standard et sur mesure vendus stériles et non stériles. Conception, fabrication et négoce d’implants orthopédiques mais aussi de divers matériels chirurgicaux. Pour mieux répondre aux besoins de notre clientèle, nous étudions toute demande concernant des produits spécifiques.

Nous sommes spécialisés dans la conception, la fabrication et le négoce d’implants orthopédiques mais aussi de divers matériels chirurgicaux. Pour mieux répondre aux besoins de notre clientèle, nous étudions toute demande concernant des produits spécifiques. Notre laboratoire de recherche et de développement, créé en 1987, ainsi que notre unité de production nous permettent toute réalisation sur mesure et la création de nouveaux produits. Cette structure nous permet de collaborer avec les services de chirurgie orthopédique des hôpitaux et cliniques. + Certification ISO 13485

L’AirSafe PM permet une surveillance continue et précise de l’exposition aux poussières dans l’air ambiant intérieur : salles de contrôle, zones de stockage, chaufferies, postes de travail, installations Adapté aux mesures à haute et basse gamme, l’AirSafe PM peut être utilisé pour la surveillance de l’exposition à la poussière sur le lieu de travail afin de détecter et de suivre les limites d’exposition aux particules et les dépassements de seuils. Les services HSE de votre site peuvent utiliser les données de mesure pour suivre la qualité de l’air sur le site et mettre en place les mesures requises pour assurer un environnement de travail sûr. Paramètres mesurés:Particules solides dans l’air ambiant Plage de niveaux de PM:Fraction E : 0 … 20 mg/m³, Fraction A : 0 … 2 mg/m³ Compensation de l’humidité:Oui Réglage de la densité de poussière:Oui

The last generation of Cairsens® micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1, PM2.5 and PM10 concentrations. Measured Parameter:PM1, PM2.5 & PM10 Measuring Range:0 – 1 000 µg/m3 Particle size detection range ø:0.3 – 10 µm Certified Detection Limit:< 5 µg/m3 Display resolution:0.01 µg/m3 Linearity:R2 > 0.75 Uncertainty between sensors:< 5 µg/m3 Accuracy (slope):0.7 to 1.3

The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. Measuring principle:Amalgamation on MI GoldTrap (PA-2 Gold only), cold vapor atomic absorption (CVAAS) at 253.7 nm UV-Source:Electrodeless low pressure mercury lamp (EDL) Stabilization method :Reference beam method Optical cell:Fused silica (Suprasil), lapprox. 230mm, heated approx. 55° Measuring ranges PA-2 :0.1 … 1 µg/l to 0…10 mg/l Measuring ranges PA-2 Gold :0.01 … 1 μg/l to 0.1 … 10 μg/l Sensitivity:> 0.01 µg/l

Multisensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable monitoring of leaking an broken bags in dust collectors • sensor configured remotely via controller • large graphic and numeric display • reduces filter maintenance intervals, process downtimes and filter costs

Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all circumstances. QAL1 certification range:0-5 µg/m3 Detection limit:< 0.05 µg/m3 (system) Precision (accuracy):Precision (accuracy) Max. drift:< 0.15 µg/m3 / 3 months Operating temperature:+5°C to +40°C (without air conditioning) Sample max temperature:200°C as standard (others as option)

The Cairsens© NO2 sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:NO2 Measuring Range (ppm):0 – 0.25 Certified Detection Limit (ppm):0.02 Resolution (ppm):0.001 Operating Temperature (°C):-20 to +40

Le LAS 5000XD TDLS (Spectroscopie par Diode Laser Accordable) existe en plusieurs modèles et mesure une large gamme de paramètres tels que NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, CO2 + H2O, etc. Il conjugue robustesse et rapidité de réponse (1 s) avec une grande précision de mesure dans des environnements difficiles. NH3 + H2O:0–10 ppm / 0–5000 ppm + 0–5% / 0–40% HF:0–3 ppm / 0–500 ppm CO + H2O:0–50 ppm / 0–1% + 0–5% / 0–40% CO + CO2:0-1% / 0-100% + 0-1% / 0-100% Précision:< 1% de FS Temps de réponse (0–90%):1 s Linéarité:≤ ±1%

The Natural Gas Sampling System 3000 is designed for very fast conditioning of samples from a pressurized natural gas source. Particle filter:1 micron stainless steel T-filter Max. sample inlet pressure:approx 200 bar Pressure out:0.0 – 1.0 bar (typically 0.28 bar)

Radar sensor for measuring the level in silos and containers. Available for silos up to 120 m height. Can be used for a wide variety of materials, regardless of the size or composition of the material. • 80 GHz allround sensor • continuous measurement • maintenancefree operation through noncontact measuring principles • reliable measurement independent of vapour, dust and noise

Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 . Measuring principle:Amalgamation (MI GoldTrap), cold vapor atomic absorption (CVAAS) at 253.7 nm Measured component:Total Gaseous Mercury (TGM) UV-Source:Electrodeless low pressure mercury lamp (EDL) Stabilization method:Reference beam method Optical cell:Fused silica (Suprasil), l: approx. 230mm, heated approx. 45° Detection limit:0,1 ng/m³ corresponding to 0,5 pg Hg absolutely Sample volume:0,1 l to 10 l Sampling duration:9 sec … 15 min Measurement cycle time:3 … 99 min

The Cairsens© SO2 sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:SO2 Measuring Range (ppm):0 – 1 Certified Detection Limit (ppm):0.05 Resolution (ppm):0.001 Operating Temperature (°C):-20 to +50

Standalone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0100%) after bag houses, cartridge filters, cyclones, etc. • reliable monitoring of leaking and broken bags in dust collectors • external display • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of THC or simultaneous THC, nmHC & CH4. Utilizes Flame Ionization Detection (FID), the most sensitive and widely used technology for the measurement of Total hydrocarbons (THC) / Nonmethanic Hydrocarbons (NmHC) / Methane (CH4) • ideal for wet and corrosive process conditions • high accuracy, sensitivity and stability • real time calibration graph • complies with EN 12619 & EN 13526 standards for emissions monitoring • complies with CFR 40 1065 (US EPA) for engine emission testing of hydrocarbons

MP101M beta gauge monitor with its optional optical particulate monitor. Measured parameter:PM10, PM2.5, PM1, TSP Technology:Beta Ray Attenuation US-EPA Approval / QAL 1 Certification:Yes Measurement ranges:up to 10 000 μg/m3 Measurement units:µg/m3 Lower Detectable Limit (2σ):0.5 μg/m3 (24h average) Sample flow rate:1 m³/h Temperature range:+5°C to 40°C

The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory. Measuring principle:cold vapor atomic absorption (CVAAS) at 253.7 nm; Peak method UV-Source:Electrodeless low pressure mercury lamp (EDL) Stabilization method :Reference beam method Optical cell:Fused silica (Suprasil), l: approx. 230mm, heated approx. 45° Sample volume:2 – 10 ml

The Cairsens© NH3 micro-sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:NH3 Measuring Range (ppm):0 – 25 Certified Detection Limit (ppm):0.5 Resolution (ppm):0.001 Operating Temperature (°C):-20 to 40

Microwave sensor for continuous moisture measurement in dry bulk solids and installation on conveyor belts, screw feeder or hoppers. Microwave based sensor for high resolution and accuracy. • highly resistant to abrasion • integrated temperature reading • flow detection function • moisture ranges 0 65 % • measurement accuracy 0.1 % • ATEXcertified

LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, etc. It combines robustness, fast response time (1 s) and high accuracy measurement in harsh environments. NH3 + H2O:0–10 ppm / 0–5000 ppm + 0–5% / 0–40% HF:0–3 ppm / 0–500 ppm CO + H2O:0–50 ppm / 0–1% + 0–5% / 0–40% CO + CO2:0-1% / 0-100% + 0-1% / 0-100% Lower Detection Limit:< 1% of FS Response Time (0–90%) – Short:1 s Lack of fit/Linearity :≤ ±1%

The Cairsens© CO sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:CO Measuring Range (ppm):0 – 20 Certified Detection Limit (ppm):0.05 Resolution (ppm):0.001 Operating Temperature (°C):-20 to +50

Certified multisensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zones and in dry processes with elevated pressures. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

Continuous flow measurement of powder or granules in high pressure densephase conveying. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • pressureresistant up to 64 bar • maintenancefree • contactless • ATEX category 3 approved

Eco-designed, ultra-compact, smart & connected continuous gas analyzer, for emission or process gas monitoring. Perfectly suited to control SO2 removal efficiency in processes using Flue-gas desulfurization FGD / DeSOx systems. Measurement range:0-100 / 0-1000 mg/m3 user programmable; 0-35 / 0-1500 ppm user programmable Minimum detectable limit (2σ):0.2 ppm Noise (σ):0.1 ppm Response time (0-90 %):5 – 40 sec (programmable) Zero drift:< 1 ppm / 7 days Span drift:< 1% / 7 days Linearity:± 1 %

Mercury emission monitoring by sorbent traps is a good and practical alternative to conventional Hg CEMS. Measuring range: (total mercury) :0.01 – 1000μg/m3 Sampling period::from 15 minutes up to 4 weeks Flue gas temperature::< 200˚C with heated probe; > 200˚C on request Max. dust concentration in flue gas::20 mg/m3 Operating temperature::+5 to +40˚C (optional with air conditioner: -20 to + 55˚C)

Material flow monitoring with Flow/No Flow information plus additional “Detection of blockage” or “Material flow interruption” function (Jam/NoJam) • contactless operation using microwaves • particularly reliable device due to microwaves passing through material accumulations • Measurement from outside for all nonmetallic tank walls, housings, hose lines or pipelines • usable in ATEX zones and high operating temperatures

The VOC72M’s metrology, in accordance with EN 14662-3 (2005) & EN 15267-1 (2009) standard for benzene measurement, is based on gas chromatography (GC) coupled with a photo-ionization detector (PID). Measured parameter:VOC (Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1,3 Butadiene) Technology:Gas Chromatography US-EPA Approval / QAL 1 Certification:Yes Measurement ranges:up to 1000 µg/m3 Measurement units:ppb, ppm, µg/m3 (user-selectable) Noise (σ):≤ 0.025 µg/m3 at 0.5 µg/m3 benzene Lower Detectable Limit (2σ):≤ 0.05 µg/m3 benzene Zero drift:≤ 4% / 15 days Span drift:< 1% / 7 days Sample flow rate:50 ml/min Temperature range:0°C to +30°C Data storage:1 year

Broches pour ostéosynthèse standard et sur mesure vendus stériles et non stériles. Conception, fabrication et négoce d’implants orthopédiques mais aussi de divers matériels chirurgicaux. Pour mieux répondre aux besoins de notre clientèle, nous étudions toute demande concernant des produits spécifiques.