Produkty dla instrumenty (56)

Knight Optical offers a range of precision optical components for use in IPL (Intense Pulsed Light) applications. The most common usage of IPL systems are typically used as photo epilators.Custom Ceramic Reflectors are a key component for this application. The xenon flash lamp which are typically used emit light in 360 degrees. However utilising ceramic reflectors which are light reflectors with a U channel means that light which would normally be wasted i.e. shining backwards is now refocused down into the filters and light guides. Knight Optical provides ceramic reflectors which are typically moulded from alumina. This choice of material is down to its ability to withstand thermal stresses and high reflectivity values. For more information read PDF

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionary leak tester : F610. This instrument is particularly suitable for polluted workplaces (dust, oil, etc.). New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. Inside is the latest leak testing technology that will guarantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging… Differential pressure decay leak measurement. Use in pressure and vacuum Large range of leak measurement (ΔP) F.S. : 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight:10 Kg Dimensions:(WxHxD) 380 x 287 x 120 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

Knight Optical offer a range of Stock BK7 Windows, for use within Wind Monitoring LiDAR Systems. These LiDAR systems are used in monitoring wind speeds and wind direction. The data accumulated can be used to generate a Digital Terrain Model or a Digital Elevation Model which are 3D representations of terrain. BK7 is one of the most widely used optical glasses available for use in the range from visible up to the near infrared. Making it ideal as a protective optical window for Wind LiDAR systems which operate at 1500-1560nm. The BK7 can offer an uncoated average transmission of 92% between 300nm and 2000nm. SEE PDF for Full Details Material::N-BK7 or equivalent Diameter Tolerance::+0.0/-0.15 mm Length/Width Tolerance::+/- 0.10mm Thickness Tolerance::+/-0.10mm Transmission::Tavg=92% dependent on substrate thickness

Knight Optical can offer Custom Homogenizing Rods for use within Electrical Instruments. Electrical instruments use backlight displays to help illuminate and evenly distribute the light source. They can be used as mixers, which is when you want to mix colours from multi-colour LEDs together. The light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to help transmit light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipe’s critical angle; this defines the angle of acceptance at which the total internal reflection will occur. For more information read PDF Material::BK7 (or equivalent), UV Fused Silica or Other Optical Glass Length Tolerance::+/- 0.3mm Aperture Tolerance::+/-0.1mm Surface quality::<60-40 Scratch/Dig Coating::Optical

Germanium windows, in IR sensors, medical apps, pyrometry & IR imaging systems - Are you looking for a popular high refractive index and good IR transmission range material covering from 1.8-16µm? Here we are; Knight Optical’s Germanium glass material is ideal for your IR applications with its broad transmission range and opacity in the visible portion of the spectrum. Our Germanium windows are not only used in IR sensors, medical applications, and pyrometry; but also in IR imaging systems, and thermographic cameras. Typically operating in the 2µm to 14µm spectral range; that covers the LWIR (8-12μm) and MWIR (3-5μm) thermal imaging wavelength range. Our Germanium windows are available from stock, custom size and shape with Anti-Reflection coatings on one or both sides, and/or with Hard Carbon Diamond coatings. Read our PDF for more details... Material::Germanium Diameter Tolerance::Up to 300mm +0, -0.02mm Thickness Tolerance::+/- 0.2mm Flatness::< 2 waves over 90% aperture Surface quality::< 40-20 scratch/dig Parallelism::5 arcmin Coating::AR/DLC (Diamond like coating @ 7-14 micron)

Knight Optical can offer you stock and custom mirrors Plane Mirrors (general, λ/1 and λ/4 for use in Spectromters, in a range of materials such as BK7 or equivalent, Quartz, UV Fused Silica and many more. These are customisable to size and coating depending on what you are trying to achieve. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. The mirrors help produce high quality signals and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: Plane mirrors are used to transmit the signal from the light source to the receiver in the spectrometer, the higher the specifications of the mirror the better the signal for it to produce a better transmission or reflection curve that it relatively to the sample. For more information read PDF… Material::Soda lime float glass, white plate, BK7 or equivalent Diameter Tolerance::+0/-0.2mm Lengths/ width::±0.3mm (≤100mm), ±0.5mm (>100mm) Thickness::±0.25mm Surface quality::<60-40 scratch/dig for general purpose, <40-20 scratch/dig for λ/4 Flatness:: λ/4 for polished substrates Parallelism::<3 arcmin Coatings::• Enhanced aluminium 94%R for visible applications.

Knight Optical can offer IR-cut filters for use in Heat Shielding. We supply a range of Custom and Stock IR-cut filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Heat Shielding requirements. Our IR-cut filters allow good transmission levels of visible light but cut off IR and UV radiation. Our precision grade filters have an AR coating to increase their visible transmission. In many systems that require heat shielding while still needing visibility an IR-cut filter can be used. These can attenuate infrared radiation and allow through visible light, allows your temperature sensitive equipment For more information read the PDF…… Material::Borosilicate Dimensional Tolerances::±0.2 Transmission::Tavg>90% 420-620nm (Standard Grade) Transmission::Tavg>94% 420-620nm (Standard Grade) Blocking::Tmax<2% 700-1000nm Wavelength Accuracy: :±10nm Surface Accuracy:60/40 (Standard Grade) Surface quality::60/40 (Standard Grade)

Knight Optical can offer Hot Mirrors for use in Heat-Sensitive Systems. We supply a range of hot mirrors for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specs. What’s more, our Hot Mirrors are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers working with Heat-Sensitive Systems. Hot Mirrors are designed to transmit visible wavelengths and to reflect heat, causing infrared wavelengths. Hot mirrors have a sharp cut-off between Infrared (IR) and visible because they have a dielectric coating that can be controlled for different AOIs (most commonly 0°). For systems that require heat shielding while still needing visibility, hot mirrors can be used. These can attenuate IR radiation and allow visible light, which permits your temperature-sensitive equipment to be visible. Material::Borosilicate Shape::Circular Mirror, Square Mirror Dimensional Tolerances::+/- 0.1mm Parallelism::< 5 arcminutes Surface Accuracy: :< 5(2) @ 633nm Surface quality::< 40-20 Scratch/Dig

Knight Optical can offer you Stock and Custom Fresnel Lenses, for use within Magnification Displays in a range of materials such as PMMA Acrylic and Borosilicate. We supply a range of Fresnel Lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Our Fresnel Lenses consist of a flat surface with interspace concentric steps whereby each step corresponds to the surface of a conventional lenses. PMMA Acrylic is a preferred material type of the Magnification Displays as it is very lightweight when used in a large size. Fresnel lenses is a common focal length equivalent to a traditional lens, but with a fraction of the thickness. Additionally, because the lens is so thin little light is lost by absorption. Read PDF for more information…. Material::PMMA Acrylic/ Borosilicate Center thickness::+/- 0.2mm Clear aperture: :Nominal Standard range:± 5% Precision range:± 2% typically (± 5% manufacturing data) Design condition::Parallel light on grooved side

LED Lighting Industry Colour Glass Filters as downlights within stage production - Knight Optical has successfully launched a range of Stock Colour Glass Filters, for use within Entertainment and Design Industry. Within the LED Lighting Industry, Colour Glass Filters can used as downlights within a stage production by filtering the different visible wavelengths and filter out unwanted light from a white light source to provide desired coloured light that is perceived by an audience to be a highly saturated or intense colour. This is just what you need to help set the atmosphere for whatever event you’re planning We hold a massive inventory of Bandpass, Long pass, Short pass, and Mounted Colour Glass Filters. Stock sizes of 25mm diameter; and 50x50mm squares x 1mmthk with larger sizes of 300x300mm available on most of our filters as a custom option. Custom shapes and sizes at short notice, in most cases turned around within 1-2 week. Alternative thickness substrates available. For more information read the PDF ….. Material::Schott Colour Glass Diameter Tolerance::+0.0/-0.20 mm Length/Width Tolerance::±0.20mm Thickness Tolerance: :±0.20mm Transmission::Tmax typically=95%

Knight Optical can offer Custom Homogenizing Rods for use within Fluorescence Imaging. Knight Optical supply precision optical components to customers in the medical industry for applications such as fluorescence illumination, microscopy and imaging. Homogenizing Rods are used within the application of surgical procedures; within systems designed to help identify which tissues have been exposed to the fluorescent indicator. The Light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to channel the light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipes critical angle; this defines the angle of acceptance which the total internal reflection will occur at. With this it helps to control the light source being used in medical systems. Read PDF for more info Material::BK7, UVFS or Other Optical Glass Length Tolerance::+/- 0.3mm Aperture Tolerance::+/-0.1mm Surface quality::<60-40 Scratch/Dig Coating::Optional

Knight Optical can offer Fire-Polished Aspheric Lenses for use within Optical Systems. We supply a range of Fire-Polished Aspheric lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Aspheric lenses are used to correct for spherical aberrations and can be as effective a multi-lens system while taking up less physical space and reducing weight and cost. As such these lenses are often used in military applications, such as night vision goggles or missile guidance systems For more information read PDF ….. Material::B270 or equivalent, Borosilicate Dimensional Tolerances::+/- 0.25mm Surface Quality: :< 60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

Ball Lenses are widely used for focusing & coupling light into & out of fibres. With the high refractive index of Sapphire (Al2O3) material, it yields a low spherical aberration that can be used in the range of UV from 200nm up to 5µm, and with it being one of the hardest materials they are resistant to damage. The key feature of ball lenses is their short back focal length allowing for precision coupling where size or space is a limiting factor in the system. Typically used in pairs, where one lens acts as collimator for the second to focus the light back into the coupled fibre. Ball Lenses are manufactured from a single substrate of glad and therefore, depending on the geometry of the input source, can focus or collimate light. Half Ball Lenses can also be used as an interchange with a full ball lens for more compact designs. Read the PDF for more information... Material::BK7 or equivalent, Sapphire, Ruby, Quartz Diameter Tolerance::±2.5 Figure (sphericity)::1λ Focal Length (@587mm)::± 0.2% (<10mm), ±2.0% (10-1000mm), ±5.0% (>1000mm) Surface quality::<40-20 Scratch/Dig Back Focal Length (mm)::0.05 up to 2.34 for stock parts Focal Length (mm)::0.345 up to 7.34 for stock parts

Optically clear & manufactured for Drone & Vision system cameras & CCTV - Knight Optical has successfully launched a range of Stock Optical Domes for protective housing for Drone and Vision system cameras, where protection of electronic sensor systems and expensive fish-eye lenses from harsh liquid and gas environments is essential. A dome is essentially a window that has two parallel curves faces. Our domes are high quality with good form error polished faces to ensure high clarity and transmission in the Visible and NIR spectrums allowing for accurate measurement. Capabilities: Domes are readily mountable, optically clear and manufactured to a high standard. Available from 5mm to 200mm in diameter and 0.25 to 10mm in thickness offering high transmission and extreme toughness for harsh environments. For more details read the PDF ... BK7:PMMA Acrylic Quartz:Sspphire Germanium:Silicon

Sapphire (Al2O3) is one of the hardest minerals and optical materials available for use in the range from UV up to 5µm. Sapphire is birefringent and if its use is for critical optical application then the crystal might have to be cut along the zero degree plane, or C-Cut. Random cut is usually cut along a plane that is 60° off-axis as the growth in this direction is the easiest to grow. Random cut is anything that is not the C-Cut angle. Sapphire can fluoresce depending upon the concentration of other minerals within the lattice, for example Iron (Fe) or Chromium (Cr). Clear Sapphire might fluoresce orange when illuminated by UV light if impurities are in the crystal. Fluorescent free Sapphire has to be grown from 'pure' feedstock and seed and in an environment that cannot place impurities into the lattice. Click PDF link to read more …... Material::Random-Cut Sapphire Diameter::+0.0 / -0.20 mm Length,width::±0.1 mm Thickness::±0.1 mm Flatness::<5λ Surface quality::<60-40 scratch/dig Parallelism::5 arc min

The He-490S is the leader among portable tracer gas leak detectors. With a response time less than 0.5 seconds, sensitivity to 10-8 direct reading atm-cc/sec, and the ability to zero-out background, this is the most aggressive portable leak detector in the industry, with advanced features designed specifically for industrial applications. The He-490S can be integrated with our Smart Charge 5 evacuation and backfill station. Fastest response time in the industry (less than 0.5 seconds) Helium background suppression Maintenance free, dry pump Sensitivity to 5 x 10-8 atm cc/sec Less than 3 minutes total start-up time Fully automatic calibration sequence with built-in 10-5 atm cc/sec gas leak Front panel key lock-out Sealed membrane keypad Fully interactive system diagnostics with multilingual displays High output (110dB) adjustable audio alarm Sensitivity: Smallest detectable helium leak rate 5 x 10-8 atm cc/sec Measuring Scale: 7 decades Weight:70 lbs / 31.8 kg Dimensions:(WxHxD) 344 x 395 x 618 mm / 13.5″ x 15.5″ x 24.4″ Operating:32F to 115F / + 0°C to + 46°C Storage:32F to 140F / + 0°C to + 60°C

Knight Optical can offer Cylindrical Lenses for use within Optical Systems. We supply a range of cylindrical lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with optical systems. Cylindrical lenses are designed to light to a straight line, rather than a point. Cylindrical lenses are often used to change the profile of laser beams, for example to correct for astigmatism and elliptic shape in diode lasers or to generate lines from single mode lasers. For more information read the PDF… Typical specs::. Material::N-BK7 or equivalent, UV Fused Silica, SF11 or equivalent Dimensional Tolerances::+/- 0.1mm Shapes::Diameter/Rectangular, Convex/Concave Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure: :< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required)

Knight Optical can offer Planoconcave Lenses for use within Optical Systems. We supply a range of Planoconcave lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Planoconcave lenses are simple lenses with a plane surface and a concave surface and form a moderate quality image close to the axis. Concave lenses have a broad range of applications including, focussing and control of laser beams, moderate quality imaging and other optical instruments. In a multi-element optical system they reduce the power of the system. Used on their own they form a diverging cone or virtual image. A typical use for concave lenses would be in a beam expander. For more information read the PDF …. Material::N-BK7 or equivalent, UV Fused Silica, SF11 or equivalent Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure::< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required)

Sapphire is an incredibly hard crystal (HK1370kg/mm2), second only to diamond. Fluoresence free sapphire windows have high mechanical strength, thermal and chemical resistance and is scratch resistant, making it very desirable for operating in harsh conditions. Sapphire windows can be made thinner than alternative crystals thanks to its structural integrity and can operate up to 2030⁰C. The material transmits between the UV and IR at 0.15-5.5µm, and has a high refractive index of 1.75.. Knight Optical supply a range of quality Sapphire optical components including Fluoresence free sapphire windows, Sapphire lenses, Sapphire prisms, and Sapphire blanks either from stock or bespoke custom made to your specification for a range of applications.  Our current range includes Random Polarization Sapphire that can be used for most applications apart from UV use. Click link URL to read more …

New for 2019, Knight Optical’s newly expanded collection of Moulded Optics now further meet the demands of the most complex, high-specification projects. Drawing on our 28 years’ experience and passion for producing premium-quality components, we now provide an even greater component offering within our Moulded Optics range. From Quartz Tubes and Aspheric Lenses to sought-after Germanium Windows and Fresnel Lenses, our optics are specified for a diverse variety of applications – such as magnification and light diffusion. One of the most popular uses for Moulded Optics is light sensor devices. Connected to floodlight circuits and used to detect movement within their radar, these devices are commonplace within the defence industry and for home and workplace security usage. Their operation lies within their ability to identify infrared (IR) wavelengths emitted from objects within their field of view. Read PDF for more information…. Material: :Acrylic or PMMA Diameter: :+0.0 / -0.25 mm Thickness: :+0/-0.20 mm Surface quality: :<60-40 Scratch/Dig

Knight Optical offer a range of Stock BK7 Windows, for use within Wind Monitoring LiDAR Systems. These LiDAR systems are used in monitoring wind speeds and wind direction. The data accumulated can be used to generate a Digital Terrain Model or a Digital Elevation Model which are 3D representations of terrain. BK7 is one of the most widely used optical glasses available for use in the range from visible up to the near infrared. Making it ideal as a protective optical window for Wind LiDAR systems which operate at 1500-1560nm. The BK7 can offer an uncoated average transmission of 92% between 300nm and 2000nm. SEE PDF for Full Details Material::N-BK7 or equivalent Diameter Tolerance::+0.0/-0.15 mm Length/Width Tolerance::+/- 0.10mm Thickness Tolerance::+/-0.10mm Transmission::Tavg=92% dependent on substrate thickness

Knight Optical can offer you Custom Sapphire Cylindrical Lenses, for use within Endoscopes. We supply a range of Sapphire options for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specifications. What’re more, our Sapphire Cylindrical Lenses are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Sapphire (Al2O3) is one of the hardest minerals and optical materials available for use in the range from UV up to 5µm, making it ideal as a protective window for camera systems. Cylindrical lenses are designed to focus light into a straight line, rather than to a single point. As the name suggests, the lens surface has a cylindrical shape rather than the usual spherical formation, which allows for one-dimensional shaping of light along a line. Cylindrical lenses are often used to change the profile of laser beams; for example Read PDF for more info Dimensional tolerance: :+/- 0.1mm Figure (sphericity)::1λ Focal Length Tolerance::± 0.2% (<10mm) Wavelength Range::0.17 – 5.5µm Surface quality::<40-20 Scratch/Dig Coating::A range of Anti-Reflective (AR) coating options

Knight Optical can offer Barium Fluoride Optics for use within Medical Imaging. We supply a range of Barium Fluoride Optics for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. We supply precision optics to customers in the medical industry for applications such as medical thermology and thermography. Barium fluoride optics are used in the detection and screening of breast cancer and for screening for atypical pneumonia (SARS) and monitoring respiratory conditions. Due to barium fluoride’s high radiation resistance, it is ideal for use in high radiation (x-ray/gamma rays) environments. Other applications include cryogenically cooled thermal imaging systems, infrared spectroscopy and high energy neutron detection. For more information read PDF… Material::Barium Fluoride (BaF2) Shape::Spherical Lenses, Aspheric Lenses, Windows, Prisms Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

Knight Optical can offer UV Fused Silica Windows for Vacuum Applications. UV Fused Silica is a relatively hard optical glass with a very low coefficient of thermal expansion. This means that it is a good choice for us in Vacuum applications, as any difference in temperature will not affect the optical performance. In addition to the above, UV FS has high transmission from UV to NIR meaning that there is little loss of image when it is used for a Vacuum Window/viewport and therefore the quality of the optical system is not compromised. All our UV Fused Silica Lenses are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptics Optispheric, and Starrett AV300 and Zygo Verifire XPZ. This allows us to work to the highest QA standards and meet the tolerance specifications on these precision components Read PDF for more info Material::UV Grade Fused Silica Operating Wavelength::587nm Diameter Tolerance::+0 / -0.10mm Centring Tolerance::<5 arc min Focal Length Tolerance::± 0.2mm (<10mm) ±2.0% (10mm – 1000mm) Centre Thickness Tolerance::±0.2mm Surface Figure::3/ 3 (1) Surface quality::<40-20 Scratch/Dig Coating::Optional

Knight Optical can offer Planoconvex Lenses for use within Optical Systems. We supply a range of Planoconvex lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Planoconvex lenses are simple lenses with a plane surface and a convex surface and form a moderate quality image close to the axis. They are generally used as elements within a more complex lens system or optical instrument in imaging systems, collimation, lasers and detectors. For more information read the PDF… Material::N-BK7 or equivalent, UV Fused Silica, SF11 or equivalent Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure::< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required)

Sapphire is an incredibly hard crystal (HK1370kg/mm2), second only to diamond. Fluoresence free sapphire windows have high mechanical strength, thermal and chemical resistance and is scratch resistant, making it very desirable for operating in harsh conditions. Sapphire windows can be made thinner than alternative crystals thanks to its structural integrity and can operate up to 2030⁰C. The material transmits between the UV and IR at 0.15-5.5µm, and has a high refractive index of 1.75.. Knight Optical supply a range of quality Sapphire optical components including Fluoresence free sapphire windows, Sapphire lenses, Sapphire prisms, and Sapphire blanks either from stock or bespoke custom made to your specification for a range of applications.  Our current range includes Random Polarization Sapphire that can be used for most applications apart from UV use. Click link URL to read more …