Produkty dla instrumenty (46)

The Imeta A1 model is a simple model seamer but nonetheless is equipped with all the necessary features for manufacturing small batches and/or seaming tests. The machine has CE protections as standard, and may be supplied with a CO2 flow device to seam carbonated soft drinks cans. The Imeta A1 seams cans up to a diameter of 190mm and a height of 250mm.

This set of calibration wires is used to adjust the correct position of the seaming rolls in relation to the seaming chucks.

Wire transducers series WDS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and strokes ranging from 3000 to 15000 mm. The housing is out of aluminium, whilst the wire consists of coated poliamide stainless steel. Strokes range:3 to 15 metres Housing:Alumiun Wire: Coated poliamide stainless steel Available interface:EtherNet/IP, EtherCAT, Profinet, Profibus, CANopen, SSI

The small size encoders series E40 feature great accuracy and compact size. The incremental encoder E40 can be supplied with different mechanical flanges: the type E40 has 6 fixing holes on diameter 30 mm, while the type 40A has 4 holes on diameter 25.4 mm; the encoder E40V has a front fixing screw, and the series E40Q is provided with a square flange of mm 43×43. The types E40M and E40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (E40 or E41). The series standard case is out of ABS plastics, with axial or radial cable or connector outlet; series RE40 with aluminium housing and IP65 radial cablepress outlet is also available. Pulses per revolution range :2 to 12500 Supply:5Vdc or 8/24Vdc Output signals:push-pull, line driver

The absolute encoders series MEM-Bus avail on an interface to connect to field bus systems according to the CANopen standard. The encoders comply with standards CIA DS301, DS406, DS 305, featuring the functions of Class 2. They are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). The encoder operating parameters are set directly by the user: revolutions no., steps per rev., rotation direction and preset no. The diagnostic function signals possible parameter, position or temperature errors as well as the battery alarm – the data memory is anyway ensured for a long period (30 years). The baud rate and node selection can be easily set by LSS protocol or by means of dip-switches. MEM40-Bus encoders avail on 3 signalling LEDs for supply state, line and error. The encoder comes with metal housing, round flange, solid or hollow shaft. The electrical connection is by M12 connector. The encoders are UL listed for Canada and USA markets. Fieldbus interface:CANopen Resolution:29 bit Supply:10/30Vdc 2 W Certification:UL Listed

Elap absolute encoders series MEM-Bus comply with the Encoder Profile Specifications V4.1 version 3.162 related to Profidrives. They fulfil the requirements of the Application Classes 3 and 4,that is they provide all functions for scaling factor, preset, rotational direction, positioning and speed values, diagnostic. MEM-Bus encoders support the RT Real Time and IRT Isochronous Real Time transmission mode, thus ensuring fast, accurate and safe data transfer. Besides standard telegrams 81, 82, 83, 84 Elap encoders support the user telegram 860, featuring Profibus telegram, a peculiarity which simplifies the encoder handling, as well as the possible migration from Profinet devices. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged, with solid or hollow shaft. Fieldbus interface:Profinet Encoder profile : V4.1 version 3.162 Application classes:3-4 Resolution:29 bit Supply:10÷30 Vdc 2.5 W Protection Degree:IP67 – Shaft side IP65 Certification:PI Certified Certification:UL Listed

Just as the digital dynamometer, the hydraulic dynamometer is used to measure the pressure of every single lower lifter during the adjustment of the seaming machine. It provides a faster but less accurate measurement than the digital dynamometer.

The digital dynamometer for beverage cans is used to simply but precisely measure the pressure of every single lower lifters during the adjustment of the seaming machine. The main feature of this instrument is its practicality of measurement and major ease of reading compared to the standard digital one, as it is equipped with a cable that allows readings of parameters reaching every area of the machine.

Semiautomatic seam saw for the automatic cutting of any type of can. Features include electropneumatic operation of blades with adjustable advancement, total retraction of blades if the protective cover is opened, modular fittings for can blocking, CEstandard protection and high soundproofing. Mono or triphase motors available. Can diameter:between 45mm and 155mm Maximum height:350mm

Stout, easy to install, highly protected against environmental agents: ELAP wire encoders series HLS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 12 metres. The encoder HLS is available with strokes ranging from 1000 to 12000 mm, and resolutions ranging from 0.04 to 1 mm, push-pull or line driver output signal. The types HLS-S, HLS-M and HLS-L differ for mechanical size and measuring stroke. Series HLS-S: 1000 mm – Resolution mm: 0.04 – 0.1 – 0.2 – 0.5 – 1 Series HLS-M: 1000, 2000, 3000, 4000, 5000 – Resolution mm: 0.05 – 0.1 – 0.2 – 0.5 -1 Series HLS-L: 6000, 7000, 8000, 9000,10000, 11000, 12000 mm – Resolution mm: 0.5 – 1 Output signals:push-pull, line-driver Zero reference pulse :1 for each encoder revolution Strokes:1000 mm to 12000 mm

The digital dynamometer allows making simple but precise measurements of the pressure in every single lower lifters during the adjustment of the seaming machine. The dynamometer is equipped with a detailed instruction manual and a number of feeler gauges suitable for different can heights. The Dynamometer is available in both with metric or imperial scales.

Stout, easy to install, highly protected against environmental agents: ELAP linear wire potentiometers series HPS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 8 metres. The series HPS, with potentiometer output, is supplied with strokes ranging from 250 to 8000 mm, ±0.25% linearity, 5 KOhm resistance and infinite resolution. The analogue output signals 4-20 mA or 0/10V are also optionally available. The types HPS-S, HPS-M and HPS-L differ for mechanical size and measuring stroke. Series HPS-S: 250, 500, 1000 mm Series HPS-M: 500, 750, 1000, 1250, 1500, 2000, 3000, 4000 mm Series HPS-L: 3000, 4000, 5000, 6000, 8000 mm Strokes range:250 mm to 8 m Resistance :5 KOhm ±10% Linearity:±0.25%

This tablet comes with a preinstalled application that allows for ontheground checks of critical seaming parameters and keeps a record of previous measurements. As a tablet, it also has many features that may be useful at the time of inspection (camera, integrated email, etc.)

This simple machine reduces the volume of empty cans by up to 80% ready for scrapping. It is entirely made of stainless steel.

These special pliers are for the rapid adjustment of seaming roll height, for Angelus L and H Series, Cevolani, FMI, Manzini, SHINI and other brands of seaming machines.

This is used for the manual cutting of the seamed edge.