Produkty dla instrumenty (68)

eliminates pinching of the sciatic nerve, pain in the waist, pelvis and tail bone in neglected cases Sacrus Physio helps wonderfully in neglected cases. Its effect is amplified by vibration, allowing relaxation of spasmodic muscles and stretching of the spine. This helps to reduce hernia and bulge to eliminate the source of pain. This spine simulator is used for lower body pain and skull base pain. Beware of counterfeits and do not buy from non-authorized dealers (no warranty will be valid).

MAX Storm 4. A dream for an entrylevel nail artist. This nail dust collector is perfect for an entrylevel nail artist and a professional who rarely works with gel and acryl. Main features of the model Convenient in work, strong casing. The nail dust collector casing is convenient both for the nail artist and the client. It does not bend and is resistant to disinfectants. The casing material is heavyduty plastic. Working on it is convenient and not cold even in winter, which compares it favorably with metal counterparts. The nail dust collector does not slip on the table. Thanks to special rubber legs, it is securely fixed on the tabletop. This makes working with the nail dust collector especially comfortable. Fan speed:3100 rpm Estimated performance:164,64 m3/hour Estimated fan life:50 000 hours LxWxH:27х29х15 cm Weight:1.1 kg Voltage:220 V Type of plug:Euro

Multipurpose industrial IR Fourier spectrometers IROS P series are designed for routine analytical measurements in the mid-IR and near-IR region of the spectrum, in particular, qualitative and quantitative analysis of samples of organic and inorganic substances in gaseous, liquid and solid state, including films and powders. IROS P series FTIR spectrometers are based on the Michelson self-compensating interferometer which does not require dynamic adjustment and has the ability to install in the cell compartment a variety of gas and liquid cells, optical attached modules and accessories for liquid, solid and gaseous samples. Main characteristics: - Spectrometers product range with resolution up to 0.12 cm-1 - High sensitivity, rapid response - Automated measurements, easy to use - Wide range of accessories - Application software for dedicated tasks KBr/Ge/CaF2/Ge, optical windows and beamsplitter with moisture-proof coating Spectral range, cm-1:12 500 – 3 700 (IROS P11), 7 800 – 370 (other models) Spectral resolution, cm-1:0.12 to 2.0 due to model Signal-to-noise ratio:> 60 000 RMS Complete spectrum obtaining min. time, s:< 1 Beam splitter:: IROS P01, IROS P02:KBr with multiKBr with Ge-based coating-layer Ge-based coating IROS P03:KBr with multi-layer Ge-based coating IROS P11:CaF2 with multi-layer Ge-based coating IROS P01, IROS P02:High-temperature ceramic metal IROS P03:High-temperature ceramic metal or external IROS P11:Halogen lamp Detectors:: IROS P01, IROS P02:Pyroelectric DLaTGS detector IROS P03:DLaTGS, cooled PbSe photo resistance IROS P11:InGaAs, Si photodiodes Cell compartment dimensions, mm:150х190х170 (IROS P11), 200x190x170 (other models) Spectrometer dimensions, mm:520х490х250 (ROS P03), 520х370х250 (other models) Weight, kg:28 to 36 due to model

Introducing the MAX Storm builtin nail dust collector for manicure. A great choice for an entrylevel nail artist. Quiet. Powerful and very convenient builtin nail dust collector. Main features of the model Powerful fan. Up to 2 times more powerful than a conventional nail dust collector. The performance of the MAX Storm fan is up to 164.64 m3/h. This is a lot, because usually this indicator for nail dust collectors is about 80 m3/hour. The nail dust collector draws in dust, particles of skin and sawdust well. The device is suitable for beginners and for nail artists who extend nails on rare occasions. Convenient and aesthetic form of the nail dust collector top cover. The nail dust collector will delight you with an interesting design. Thanks to the hidden installation of the grid, there will be no protruding parts on the table. The nail dust collector is very quiet. The volume level of the model is just 40dB. You can talk to the client without raising your voice. Fan speed:3100 rpm Estimated performance:164,64 m3/hour Estimated fan life:50 000 hours LxWxH:23х20х14 cm Weight:1,02 kg Voltage:220 V Type of plug:Euro

É aplicado por 10-30 minutos ao dia na terapia complexa de hérnias, protrusõs e compressão de nervo, e para melhorar os estados psíquico-físicos do organismo. Ajuda em caso de dores na zona de osso sacro, a pelvis, as dores de joelhos, melhora a condutividade de impulsos pelo nervo. Recupera o arco em forma de C da seção cervical de coluna vertebral e corrige o osso sacro. Estimula a circulação do sangue de líquido cerebroespinal. O modo de vibração de baixa frequência e a terapia alfa com microcorrentes permite disfrutar do processo automatizado de correção osteopática. A vibração relaxa as zonas de tensão, especialmente na zona de pelvis e nuca. A terapia com microcorrentes ativa os processos recuperativos nos músculos e o sistema central. Peso de dispositivo:0.2 kg Modos de vibração:Modo “Correção”, vibração de 8-28 Hz Modos de vibração:Modo “Relaxamento”, vibração de 12-28 Hz Dimensões, mm:163*78*38 mm Lista de equipamento:Dispositivo Sacrus Physio Lista de equipamento:Manual de operações Lista de equipamento:Embalagem comercial Lista de equipamento:Cobertura de proteção de silicona Lista de equipamento:Cordão de carga de baterias elétricas (mini\micro usb)

Ostec offers the industrial chemistry analyzer LIOS OnLine intended for quick and safe check of processes by means of continuous onstream analysis of product’s chemical composition directly on conveyor belts or in pipelines for suspensions/liquids if such analyses are made on a real-time basis exclusive of sampling, delay in laboratory analysis and any types of hazardous radiation. LIOS OnLine analyzer will allow you to: - enhance the effectiveness and improve stability of production processes; - lower production costs of commercially useless materials removing them prior to further processing; - reduce losses in feedstock; - reduce operational costs thanks to savings in electrical energy, water and reagents due to identification of process problems at early stages; - provide your clients with quality products meeting all the requirements. Based on feedback from our customers the typical payback period of LIOS OnLine is 3-9 months only.

Tratamento de hérnia, compressão de nervo, escoliose e outras enfermidades - Cordus Pro é uma decisão efetiva de tratamento de hérnia do disco intervertebral, de escoliose, de dores na região lombar, de listese, de correção de osso sacro, de dores de cabeça e de outras enfermidades nas condições de casa. A tecnologia de tratamento é baseada sobre o método de autogravidade. Este método de tratamento relaxa os músculos profundos de coluna vertebral e elimina a compressão (aperto) do disco intervertebral. O dispositivo tem três lados com os vértices pares de massagem de acupressão anatomicamente comprovados e destinados para imersão nos músculos profundos de cada seção de coluna vertebral: cervical, torácica e lombar. Parâmetros das saliências de massagem de acupressão: a altura e distância entre estas e os raios dos vértices são determinados pela anatomia de coluna vertebral, assim como são resultado de provas de muitos anos (de 2008 a 2015).

BE.DENT.PRO is a unique simulator that combines tooth preparation on a phantom with simultaneous 3D visualization of every action on a screen and automatic assessment of the performed procedure. THE TRACKING SYSTEM The microsensors, attached to the dental handpiece, are tracked in full 6DOF (6 Degrees-Of-Freedom) at speeds up to 240 Hz achieving impressive accuracy. THE SOFTWARE The truly unique software is structured in modules to visualize and assess various dental procedures: starting from history taking and X-Ray imaging up to anesthetic injection and crown preparation. THE ASSESSMENT CRITERIA The trainee obtains feedback about his/her performance both during a simulation training in real time and after completing it. The assessed criteria are history taken from a virtual patient, relevance of the chosen anesthetic, injection technique, quantitative parameters of tooth preparation, ergonomics and safety parameters. Simulator Description:A portable, multifunctional dental unit and an electromagnetic tracking system Dental Unit Components:Operation and assistant tray, utility table, foot pneumatic pedal, dental lamp Dental Unit Components:phantom for practicing, camera, caster wheels with locking mechanism The Library Of Modules:Operative dentistry, Prosthodontics, Anesthesia, X-Ray Anesthesia Module:Possible to choose anesthesia type, drug, vasoconstrictor agent and needle length Prosthodontics Module:The module consists of a set of lessons to train crown preparation. The Briefing Option:Every lesson begins with a briefing - patient’s complaints and history, physical examination results The Debriefing Option:Events, 3D capturing of the screen, video capturing from the camera and comments are synchronized

Classic Pedicure Stand - Pedicure stands

A nail dust collector for a true professional? Of course, the built-in MAX Ultimate VII! Super powerful. Stylish. Comfortable. An ideal choice for nail artists with a permanent workplace. Main features of the model: Super powerful fan. Up to 5.2 times more powerful than the one of a conventional nail dust collector. The suction power does not drop over time. The fan blades are protected by the MAX Safe+ grid. The fall of a nail file or other foreign objects, when using a conventional nail dust collector, threatens you with damage of the engine – the most expensive part of the nail dust collector. With MAX Ultimate you will not be afraid of this problem. It is equipped with a double protective grid: its outer part is made of aviation aluminum, while the inner part is a reliable metal frame which does not allow pushing the structure inside. Convenient system for switching on the device. The product is certified. The nail dust collector has 2 certificates confirming the quality. Fan speed:0 - 2500 rpm Estimated performance:401 m3/hour Estimated fan life:50 000 hours LxWxH:29х25х14 cm Weight:2,4 kg Voltage:220 V Type of plug:Euro

SensitivE Audit® DynamicB The module allows analyzing tissue conductivity and microcirculation disorders using certain dosed stimuli. Cannot be used without an interface block. The module can: • automatically conduct an incremental scanning of the head and limbs with impulses of negative and positive polarity (20 derivations), with a repetition rate of 10 Hz. At that, the electric signal test is physiological and does not cause discomfort; • to readjust the signal received via the use of direct or alternating current influence in the measuring range to exclude effect of fabric electrolysis; • use sequential transfer of frequency-wave information to the object under study along the diagonals, in accordance with the distribution of energy meridians; • to carry out early prediction of neoplastic and fibrodystrophic processes in selective foci; • to reveal the hidden foci of tissue conduction disorders and their influence on the studied object's functional reserves of adaptation.

A true professional is critical of own equipment and tools. Manicurists often face the fact that their arm stands quickly deteriorate they fade, crack or just peel off. Sometimes it comes to the fact that showing a recently bought roller to the client is embarrassing. MAX manicure rollers are made of high quality eco leather. The material retains its properties for a long time and is quite resistant to abrasion. Each roller is made by hand. MAX rollers are pleasant to the touch and serve for a long time, delighting the nail artists with their appearance. Add a roller to the order right now! LxWxH:30х10х6 cm Weight:0,18 kg

A nail dust collector for a true professional? Of course, the built-in MAX Ultimate VII! Super powerful. Stylish. Comfortable. An ideal choice for nail artists with a permanent workplace. Main features of the model: Super powerful fan. Up to 5.2 times more powerful than the one of a conventional nail dust collector. The suction power does not drop over time. The fan blades are protected by the MAX Safe+ grid. The fall of a nail file or other foreign objects, when using a conventional nail dust collector, threatens you with damage of the engine – the most expensive part of the nail dust collector. With MAX Ultimate you will not be afraid of this problem. It is equipped with a double protective grid: its outer part is made of aviation aluminum, while the inner part is a reliable metal frame which does not allow pushing the structure inside. Convenient system for switching on the device. The product is certified. The nail dust collector has 2 certificates confirming the quality. Fan speed:0 - 2500 rpm Estimated performance:401 m3/hour Estimated fan life:50 000 hours LxWxH:29х25х14 cm Weight:2,4 kg Voltage:220 V Type of plug:Euro

LIOS 500N is a modern powerful instrument that incorporates innovative technologies in spectroscopy, lasers, and software enabling unique measurements of chemical elements in a sample as well as 2D, 3D elemental mapping, and in-depth profiling. The most convenient and efficient analytical technique of choice for a wide range of applications. Main advantages: - Universality (no need to restart the instrument while analyzing different materials) - Easy and fast analysis (little to no sample preparation) - Highest analytical flexibility (variations in a sample shape and size may be infinite) - High-Speed Analysis - Wide range of concentrations (from ppm to tens of percent) - High accuracy measurements and stability - Low cost of a single analysis, minimum consumables The optical layout offers the ability to make analysis of chemical composition in a small area of inhomogeneous samples, provides elemental mapping and layer-by-layer analysis. Optical layout:double-beam Construction:thermostabilized Spectral Range:175-800 nm Focal length:500 mm Dispersion:0.5 nm/mm (for 3600 l/mm grating) to 1.0 nm/mm (for 1800 l/mm grating) Operation environment:atmosphere of buffer gases Detection limits:up to 0.1 ppm Radiation source:double-pulse nanosecond laser with 20 Hz p.r.r. of double pulse Sample holder:motorized multi-positional (12 positions)

L’exosquelette «Companion», développé par la société Symbionix, est un appareil robotique combiné muni de système de stimulation EMS conçu pour réhabiliter les personnes atteintes de lésions du système musculo-squelettique et du celui nerveux central dues aux blessures, chirurgies et accidents vasculaires cérébraux. L’exosquelette est le mécanisme automatisé répètant l’anatomie de la ceinture inférieure des membres humains équipe de la batterie et du module de contrôle externe. Grâce aux supports ergonomiques, le présent appareil se fixe sur la personne et lui permet de se déplacer confortablement. La conception est faite de matériaux modernes de technologie moderne, de plastique d’une haute résistance et d’alliage de titane – c’est pourquoi l’exosquelette ne pèse que 8,5 kg, le faisant l’un des plus légers et des plus durables au monde entier, tout en étant capable de travailler avec la personne pesant jusqu’à 120 kg et ayant une taille de 2 mètres de haut. Poids de l’appareil:8,5 kg Autonomie de la batterie sans recharge:Jusqu’à 12 heures Poids max du patient:Jusqu’à 120 kg Hauteur max du patient:Jusqu’à 2 mètres Personnalisation de l’appareil pour le patient:Ne dépasse 7 minutes Dimensions (plié):550*400*350 Disponibilité du système EMS:Oui Capacité de s’adapter aux paramètres individuels de personne:Oui

A gel for ultrasound transmissions, Doppler sonography, physiotherapy and cosmetology. Features lower viscosity than Mediagel of High Viscosity. Effective for all types of transmissions. The gel serves as an effective contact medium for ultrasound transmission and therapy when using domestic or imported equipment. The gel is applied directly to the transducer or the patient's body, is easy to spread over the skin, does not smear, and dries up slowly, ensuring a lasting sliding effect and a full contact between the transducer and the patient's body. After completing the transmission, the gel is easily removed with a tissue or rinsed off with water. The gel does not stain clothes, cause allergy or damage the transducers, and is water-soluble. Viscosity:Brookfield 18.0–22.0 Pa•s (equivalent viscosity 9.5–11.5 Pa•s at a shear rate of (16.8±0.3)s-1) pH:6.8-7.0 Acoustic impedance:1.56×10*5 g/cm2×s Shelf life:3 years Packaging:1 box - 4 canisters (5 kg each) / 20 bottles (1 kg each) / 40 bottles (0.25 kg each).

It comes as the set with 5 interchangeable ingrown toenails mounted on the platform. Skills: - Wedge excision - partial nail avulsion - Total nail avulsion - Suturing

El exoesqueleto “Compañero” está desarrollado por la compañía “Simbionix”, es un dispositivo robótico compatibilizado con el sistema de EMS estimulación, destinado para rehabilitar a personas con lesiones en el sistema musculoesquelético y el sistema nervioso central debido a traumas, operaciones quirúrgicas y accidentes cerebrovasculares. El exoesqueleto es un mecanismo automatizado que repite la anatomía de la cintura inferior de las extremidades humanas con la batería y el módulo de control externo. Debido a los soportes ergonómicos el dispositivo se fija a la persona y le permite moverse cómodamente. La estructura está hecha de materiales modernos de alta tecnología, plástico de alta resistencia y aleación de titanio: el exoesqueleto pesa solo 8,5 kg, lo que lo convierte en uno de los más livianos y duraderos del mundo, mientras que puede trabajar con la persona que pesa hasta 120 kg y hasta 2 metros de altura. El exoesqueleto “Compañero” es uno de los más baratos del mundo. Peso del equipo:8,5 kg Duración de la batería sin recargar:hasta 12 horas Peso máximo del paciente:hasta 120 kg Altura máxima del paciente:hasta 2 metros Personalización del equipo para el paciente:máximo 7 minutos Dimensiones (en posición replegada):550*400*350 Disponibilidad del sistema ЕМС:Sí Capacidad de adaptarse a los parámetros individuales de la persona:Sí

Application areas: - health care - drug discovery - pharmacy - environmental monitoring - forensic science - homeland security Technical performance: - patented design is a combination of a multifunctional sample introduction and ionization system, drift tube ion mobility spectrometer and sector TOF mass spectrometer with orthogonal acceleration - Multifunction sample introduction and ionization system works with both integrated ion sources and external available engineering solutions. Integrated ionization platform allows to use electrospray (ESI), atmosphere pressure chemical ionization (APCI), atmosphere pressure photoionization (APPI) - high resolution ion mobility spectrometer provides maximum selectivity compared to existing commercial instruments Main advantages: - allows to reach better sensitivity than approaches based on orthogonal acceleration reflectron TOF analyzers - allows to analyze gases and liquids much faster than liquid chromatography/mass spectrometry Mobility resolving power:70 – 120 (measured as td/dt1/2) Drift tube temperature:20 – 250°C Mass range:20 – 1000 Da Mass resolving power:2000 (FWHM) Detection limits:relative 4*10-9 M, absolute 7*10-15 Mol (for 2,6-DtBP during 100 sec) Mass accuracy:5 ppm Data collection:real-time integrating transient recorder based on 655 MHz 8 bit analog-to-digital converter Weight:100 kg Dimensions:60 cm (wide) x 80 cm (deep) x 130 cm (tall) Software:control of instrumental parameters, data collection and processing

«Leonardo» est un simulateur unique qui combine la préparation d'une dent sur un modèle avec une visualisation tridimensionnelle simultanée de chaque action à l'écran et une évaluation automatique de la procédure effectuée. SYSTÈME DE SUIVI Les microcapteurs de la pièce à main dentaire sont suivis selon 6 degrés de liberté à des vitesses allant jusqu'à 240 hertz pour une précision impressionnante. LOGICIEL Le logiciel unique a une structure modulaire. Les modules présentent une variété de procédures dentaires, de la prise d'anamnèse et de radiographies à l'administration d'une anesthésie et à la préparation d'une couronne. CRITÈRES D'ÉVALUATION L'étudiant reçoit des commentaires sur son travail à la fois pendant la formation sur simulateur en temps réel et après l'achèvement. Les critères évalués sont l'anamnèse du patient virtuel, la pertinence de l'anesthésique sélectionné, la technique d'injection, les paramètres quantitatifs de la préparation dentaire. Description du simulateur:Appareil dentaire multifonctionnel portable et système de suivi électromagnétique Composants de l'appareil:Plateau d'opération assistant, table à instruments, pédale pneumatique, lampe dentaire, Composants de l'appareil:modèle de pratique, caméra, roulettes avec mécanisme de verrouillage Bibliothèque de modules:Dentisterie opératoire, prothèses dentaires, montage radiographique Module d'anesthésie:Il peut sélectionner le type d'anesthésie, l'agent, le vasoconstricteur et la longueur de l'aiguille Module de dentisterie opératoire:Le module est conçu pour enseigner la préparation d'une cavité dentaire carieuse Module de prothèse dentaire:Le module comprend des leçons sur la préparation des couronnes dentaires Option de briefing:Chaque leçon commence par un briefing Option de briefing:Le briefing comprend les plaintes des patients et les antécédents médicaux, les résultats des examen Option de rapport:Chaque fois, l’image 3D et l’enregistrement vidéo se font à l'aide d'une caméra externe; Option de rapport:les réponses sont synchronisées avec la chronologie (journalisée).

It is the nail dust and feet skin particles that are most dangerous things. Even working in a mask, you still inhale up to 20% of the finest dust, which may contain fungal infections and bacterial endotoxins. The solution is MAX Ultimate for pedicure. This nail dust collector is easy integrated into your pedicure stand. Even an inexperienced person will need no more than 10 minutes to install it. The nail dust collector is equipped with a super powerful fan and is convenient for use. Main features of the model Super powerful fan. Up to 4.5 times more powerful than the one of a conventional nail dust collector. The performance of the MAX Ultimate fan is up to 339.81 m3/h. This is a lot, because usually this indicator for nail dust collectors is about 80 m3/hour. The nail dust collector draws in dust, particles of skin and sawdust perfectly. It will help make your office clean and safe. A great choice for nail artists who use gel and acryl in their work. Fan speed:0 - 2700 rpm Estimated performance:339,81 m3/hour Estimated fan life:50 000 hours LxWxH:29х33,5х7 cm Weight:1,3 kg Voltage:220 V Type of plug:Euro

El dispositivo Sacrus Physio imita las técnicas de terapia manual para corrección de columna vertebral y relajación de los músculos pasmados de cuello, hueso sacro y zona lumbar en las condiciones. Se aplica por 10-30 min. al día en la terapia compleja de hernias, protrusiones y pinzamiento de nervio, y para mejorar los estados psíquico-físicos del organismo. Ayuda en caso de dolores en la zona de hueso sacro, la pelvis, los dolores de rodillas, mejora la conductividad de impulsos por el nervio. Recupera el arco em forma de C de la sección cervical de columna vertebral y corrige el hueso sacro. Estimula la circulación sanguínea de líquido cerebroespinal. El modo de vibración de baja frecuencia y la terapia alfa con microcorrientes permite disfrutar del proceso automatizado de corrección osteopática. La vibración relaja las zonas de tensión, especialmente en la zona de pelvis y nuca. La terapia con microcorrientes activa los procesos recuperativos en los músculos y el sistema central. Peso de dispositivo:0.2 kg Modos de vibración:Modo “Corrección”, vibración de 8-28 Hz Modos de vibración:Modo “Relajación”, vibración de 12-28 Hz Dimensiones, mm:163*78*38 mm Lista de equipo:Dispositivo Sacrus Physio Lista de equipo:Manual de explotación Lista de equipo:Envase de venta Lista de equipo:Funda de protección de silicona Lista de equipo:Cordón de carga de baterías eléctricas (mini\micro usb)

A true professional is critical of own equipment and tools. Manicurists often face the fact that their arm stands quickly deteriorate they fade, crack or just peel off. Sometimes it comes to the fact that showing a recently bought roller to the client is embarrassing. MAX manicure rollers are made of high quality eco leather. The material retains its properties for a long time and is quite resistant to abrasion. Each roller is made by hand. MAX rollers are pleasant to the touch and serve for a long time, delighting the nail artists with their appearance. Add a roller to the order right now! LxWxH:30х10х6 cm Weight:0,18 kg

The truly powerful MAX Ultimate VII. Equipped with a unique proprietary fan. This is amazing! Imagine that you have just finished doing a nail correction for a client, and the table is clean. No more masks, sawdust on a wet napkin and other tricks. You just work clean. Do you like the feeling? Then the choice is obvious. Order your MAX Ultimate VII right now! Super fan Ultimate VII. Not just powerful, but special. Designed specifically for a manicure nail dust collector. The number of impeller blades is 9. A record among analogues! The blades become thinner towards the impeller edge. The effect is that the fan sucks in the dust-air mixture better. The powerful electric motor is located outside the fan housing. The effect: a more powerful fan can be inserted in a housing of the same size. Special design of the fan housing. This made it possible to remove the gap between the fan walls and the impeller, which any conventional fan has. Certified product. Fan speed:0 - 2500 rpm Estimated performance:401 m3/hour Estimated fan life:50 000 hours LxWxH:33х32х17,5 cm Weight without pillow:1,8 kg Weight with pillow:2,1 kg Voltage:220 V Type of plug:Euro

MaOS HiSpec. High resolving power drift tube ion mobility spectrometer Application areas: - Health care - Drug discovery - Pharmacy - Environmental monitoring - Explosives detection - Forensic science - Biotechnology Main advantages: - Improved selectivity thanks to twice increased resolving power - Possibility to apply different ionization methods - Integrated technical solution for combination with different separation techniques

Body composition measurement by means of the LineBIA method is based on assessing the distribution of water volumes in the human body and on tissue ability to conduct electricity. Cannot be used without an interface block. The module can: • determine the quantitative content of fluid in the body, body mass index, standard metabolism; • determine the active cell mass, bone mass, fat mass; • obtain unbiased data on the human body quantitative composition; • get linear control and timely correction of nutrition programs in clinical practice and sports medicine; • an unbiased assessment of physical conditioning and nutrition; • analyze the water-salt metabolism; • analyze the state of water-salt metabolism during the period of adaptive changes in the human body, under changing weather conditions (mountain climate, hot climate, or dry climate).

If you work actively with gels and gel polishes, this stand will become your convenient assistant. Due to the fact that it is higher than the standard one, it is convenient for holding both nail artist’s and client’s hands. The stand dimensions allow placing a standard UV lamp under it, which saves space on the table. LxWxH:42х22,5х18,5 cm Weight:1,25 kg

Scanning Thermal Microscopy (SThM) is an advanced SPM mode intended for simultaneous obtaining nanoscale thermal and topography images. NTMDT’s SThM kit is able to visualize temperature and thermal conductivity distribution at the sample surface. The SThM system hardware includes electronic controller, software, and probes. SThM mode of operation with an AFM requires a specialized probe with a resistor built into the cantilever. NTMDT’s SThM module allows one to monitor the resistance changes correlated with the temperature at the end of the probe. So the system is able to monitor relative changes of sample temperature and thermal conductivity. NTMDT’s thermal probes provide better than 100 nm lateral resolution for both topography and thermal images. The specialized SThM cantilever, made of SiO2 with a thin metal layer, is deposited on the probe in such a way that the highest resistance portion of the layer is concentrated near the tip apex.

A gel for ultrasound transmissions, Doppler sonography, physiotherapy and cosmetology. Features lower viscosity than Mediagel of High Viscosity. Effective for all types of transmissions. The gel is also used in laser cosmetology. The gel serves as an effective contact medium for ultrasound transmission and therapy when using domestic or imported equipment. The gel is applied directly to the transducer or the patient's body, is easy to spread over the skin, does not smear, and dries up slowly, ensuring a lasting sliding effect and a full contact between the transducer and the patient's body. After completing the transmission, the gel is easily removed with a tissue or rinsed off with water. The gel does not stain clothes, cause allergy or damage the transducers, and is water-soluble. Viscosity:Brookfield 18.0–22.0 Pa•s (equivalent viscosity 9.5–11.5 Pa•s at a shear rate of (16.8±0.3)s-1) pH:6.8-7.0 Acoustic impedance:1.56×10*5 g/cm2×s Shelf life:3 years Packaging:1 box - 4 canisters (5 kg each) / 20 bottles (1 kg each) / 40 bottles (0.25 kg each).

IR s‑SNOM microscopy and spectroscopy with 10 nm spatial resolution Wide spectral range of operation 312 μm Incredibly low thermal drift and high signal stability Versatile AFM with advanced modes SRI (conductivity), KPFM (surface potential), SCM (capacitance), MFM (magnetic properties), PFM (piezoelectric forces) HybriD Mode™ quantitative nanomechanical mapping Integration with microRaman (optional) The ability of s‑SNOM measurements in the visible spectral range (optional) NTMDT Spectrum Instruments presents NTEGRA Nano IR scattering scanning nearfield optical microscope (s‑SNOM) designed for infrared (IR) spectral range. AFM probe is located in the focus of optical system which excites sample structure by IR laser and collects the optical response. Collected light is directed to Michelson interferometer for optical analysis. Wide spectral range of operation:3-12 μm Low noise LN2 cooled MCT detector:<30 nV/√Hz at tapping frequency harmonics (100 kHz – 1 MHz) High-performance low noise AFM:Z-noise <0.05 nm (RMS in 10-1000 Hz bandwidth) Stable AFM performance at high temperatures:up to 150 °C with standard heating stage Focus track feature:sample always stays in focus due to sample Z-feedback