Produkty dla instrumenty (9550)

Inkrementaler Messtaster mit magnetischem Funktionsprinzip. Extrem unempfindlich gegenüber Verschmutzungen wie Ölnebel, Feuchtigkeit und Staub. Perfekt geeignet zur automatisierten Messwerterfassung in Messvorrichtungen, Montage und Fertigungsanlagen. Messbereich:12mm Genauigkeit:6µm (p-p) / 10µm(p-p) Auflösung:1µm / 5 µm Max. Ansprechgeschindigkeit :100m/min Referenzmarke:keine Messbolzenbetätigung:Feder / Pneumatisch mit Adapter DZ176 (optional) Ausgangsignal:TTL-Linedriver (RS422) mit Interpolator MT14 (optional)) Kompatible Messwertanzeige :LT10 / LT11 Serie

Non,sterile, autoclavable, sterilizable by gas (Ethylene oxide) 24 cm sponge holder. Thanks to its superrior lock it's not easy to open while holding code:M12110201 Size:24 cm Package Dimensions:47 cm x 31 cm x 47 cm Package Quantity:600 Package Weight (kgs):13,20 Color:Blue

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

The RMD radiometer is one of the latest developments from Opsytec Dr. Gröbel GmbH. This easy-to-use radiometer is based on more than 30 years of experience in all areas of irradiation and illuminance measurement. It features a wide dynamic range and extremely low noise. For this purpose, the sensor already contains a multi-stage amplification, an extremely precise analog-to-digital converter and a temperature sensor. The memory contained in the sensor contains all sensor identifications and the calibration history. This allows several ultraviolet sensors and visible sensors to be used on the Radiometer RMD. A wide range of sensors is available for a wide variety of production and control processes. Two sensors can be read out simultaneously. Sensors for the evaluation of erythema-weighted radiation and multi-channel sensors are also available. The measurement data are clearly displayed on the graphic display. Spectral range:UVA, UVA+, UVBB Resolution:0,001 µW/cm² Dimensions:Ø 40 mm, h 35 mm Weight:160 g Connecting cable:2 m

Microwave sensor for continuous moisture measurement in dry bulk solids and installation on conveyor belts, screw feeder or hoppers. Microwave based sensor for high resolution and accuracy. • highly resistant to abrasion • integrated temperature reading • flow detection function • moisture ranges 0 65 % • measurement accuracy 0.1 % • ATEXcertified

The differential pressure transmitters of the PD-33X series are suitable for 'wet/wet' applications. They have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure small pressure differences even at an extremely high line pressure. The transmitters use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. Pressure Ranges:0…3 to 0…30 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @-10…80 °C Line pressure:200 bar / 600 bar Interfaces:RS485, 4…20 mA, 0…10 V Special characteristics:Classic 'wet/wet'

CNC Machining at RPWORLD meet the diverse needs of clients ranging from single part to low- to mid-volume production. Our CNC machines run 24/7, ensuring that your high precision, complex geometries parts delivered in as fast as 3 days. We have equipped with 3-axis, 4-axis, and 5-axis machines, drilling machines, lathe machines and EDM, which are designed for creating complex shapes with high precision. The cutting-edge machines offer tight tolerances DIN ISO 2768 medium (fine), and wide machining range from 1mm to 1600mm. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design Industries Applied:Medical Device Industries Applied:Scientific Instrument

The pressure transmitter DMK 458 has been developed for marine and offshore applications. In addition to thread connections, different flush versions are available, which are especially suitable for pasty, viscous, and polluted media. Due to the capacitive ceramic sensor developed by BD\SENSORS, which is optionally available in Al2O3 99.9 %, the DMK 458 shows an outstanding accuracy as well as a high overload and temperature resistance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.25 % (opt. 0.1 %) FSO — shipping approvals: American Bureau of Shipping (ABS), Bureau Veritas (BV), China Classification Society (CCS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Lloyd's Register (LR) — high overpressure resistance — excellent accuracy — accuracy: 0.25 % (opt. 0.1 %) FSO Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — diaphragm AI2O3 99.9 %

Esta pinza de acero inoxidable está diseñada para los trabajos de máxima precisión en el laboratorio. La pinza es recta y tiene extremos sin punta y con rugosidades en la cara interior. Estas características permiten manipular con total precisión diferentes materiales, tejidos y muestras. La pinza de laboratorio está hecha de acero inoxidable y tiene rugosidades en el mango. Material:Acero inoxidable V2A (1.4301)

Der Typ 9180 unterstützt Kraft-, Druck- oder Drehmomentsensoren auf DMS-Basis sowie den Anschluss von Weg- oder Winkel-Sensoren in potentiometrischer oder DC/DC-Ausführung. Weiterhin können Prozesssignale ± 1 V/ 5 V/ 10 V bzw. 0 ...1 mA, 0(4) ... 20 mA gemessen werden. Auf dem 14 mm hohen LED-Hauptdisplay kann der aktuelle Messwert, auf einem zweiten Display direkt unter der Hauptanzeige der Spitzenwert abgelesen werden. Durch den geringen Messfehler von 0,1 % wird der Anzeiger vor allem höheren Genauigkeitsanforderungen gerecht. Optional ist es möglich, bis zu 4 Grenzwerte zu überwachen und das Ergebnis über Relais oder Transistorausgänge an die Steuerung zu liefern. Damit ist der Prozesswertanzeiger für Klassierungs-, aber auch für Steuerungs- und Regelungsaufgaben einsetzbar. Bei Aktivierung eines externen HOLDSignales wird der Messwert in der Anzeige festgehalten. Nützlich ist die TARA-Funktion z. B. zum Wegtarieren von Vorlasten. Messgenauigkeit:0,1 % v.E. Messrate:16/s Sensortyp:DMS / Potentiometer / Normsignale / DC/DC /Transmitter Schnittstellen:RS232, RS485, BCD Anzeige:± 999 999 Sensorspeisung DMS::10 V / 120 mA 5 V /120 mA Sensorspeisung Potentiometer::10 V/120 mA - 5 V /120 mA Sensorspeisung Normsignale:DC/DC und Transmitter: ± 1 V / ± 10 V Schutzart:IP65 Versorgungsspannung:115/230 VAC, 50/60 Hz - 24/48 VAC, 50/60 Hz Messkanäle:16

Czujnik kontroli poziomu PanCake® PR 6251 jest specjalnie zaprojektowany do ważenia silosów i zbiorników. Spełnia wszystkie wymogi niezbędne do wieloletniej bezawaryjnej pracy bez potrzeby regulacji. Do użytku w strefach EX 1, 2, 20, 21, 22 i DIV 1. Ultrapłaski czujnik PanCake® może być stosowany do niskoprecyzyjnego ważenia zbiorników i jest alternatywą dla czujników poziomu. Zakres nośności czujnika od 500 kg do 16 t. Klasa dokładności: L (0,5%) Odpowiedni zestaw montażowy: PR 6051

The Hawk user interface gives you full control over your measurement. The interface of the Hawk GUI offers the possibility of a simple and clear configuration of all measurement channels, as well as the control of data acquisition during the actual measurement. It also provides an overview of the organization of all measurement PCs and amplifiers in the network. •,Interface for configuring all connected measuring devices. •,Configuration of various limit values to monitor the measurement. •,Seamless recording of your measurement •,Define individual time ranges (manoeuvres) to make them easier to identify in the downstream analysis. •,Configuration of additional, external amplifier hardware can be integrated. •,No license fees for using the software. •,MS Windows compatible

Knight Optical can offer Biconvex Lenses for use within Optical Systems. We supply a range of Biconvex lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Biconvex lenses are simple lenses with a two convex surfaces, usually of the same radius and have a broad range of applications including, but not limited to, focussing and control of laser beams, moderate quality imaging and other optical instruments. Read PDF for more information…. Material::N-BK7 or equivalent, UV Fused Silica, SF11 or equivalent Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface Quality: :< 40-20 Scratch/Dig Surface Figure::< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required)

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA532-250 is a high-peak power MOPA with a peak pulse power of over 180 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology. Wavelength:532 nm Pulse energy:250 µJ Peakpower:180 kW Pulse Width:1.4 ns Average Power:250 mW Repetition Rate:1,000 kHz Beam diameter:0.6 mm Spatial Mode:TEM00 Application:Marking, ophthalmology, photoacoustics, LIBS, mass spectroscopy

Nonrotating torque meters with hexagonal head. Cable output with radial connector (see drawing) Mechanical fastening by collar (see drawing) Reference:6500B Wide range of capacities:from 2 to 1000 N·m Protection class:IP54 Material:stainless steel Combined error (non-linearity + hysteresis) (% F.S.*):<± 0.25 Repeatability error (% F.S.*):<± 0.1 Creep error over 30 min. (% F.S.*):<± 0.1 Reference temperature (°C):23 Compensated temperature range (°C):-10...+45 Service temperature range (°C):-30...+70 Storage temperature range (°C):-50...+85 Temperature coefficient of the sensitivity (% F.S.*/10°C):< ± 0.05 Temperature coefficient of zero signal (% F.S.*/10°C):<± 0.035 Nominal sensitivity (mV/V):1.5 Input resistance (ohm(s)):350±2 Output resistance (ohm(s)):350±2 Insulation resistance (50 V) (Mohm(s)):> 5000 Reference excitation voltage (VDC):10 Permissible nominal range of excitation voltage (VDC):3...12 Safe load limit (% F.S.*):120 Breaking load (% F.S.*):> 300 Permissible dynamic loading (% F.S.*):40 Zero balance (mV/V):± 0.02 Sensitivity tolerance (%):< ± 0.3 Static lateral force limit (% F.S.*):10 Zero shift after loading (% F.S.*):<± 0.025

The Imeta A1 model is a simple model seamer but nonetheless is equipped with all the necessary features for manufacturing small batches and/or seaming tests. The machine has CE protections as standard, and may be supplied with a CO2 flow device to seam carbonated soft drinks cans. The Imeta A1 seams cans up to a diameter of 190mm and a height of 250mm.

The Magtrol 7500 Series Power Analyzer is an easy-to-use instrument ideal for numerous power measurement applications. From DC to 80 kHz AC, the 7500 measures volts, amps, watts, volt-amps, frequency, crest factor, Vpeak, Apeak and power factor in one convenient display. They may be used either as stand-alone instruments or in conjunction with any Magtrol Hysteresis, Eddy-Current or Powder Brake Dynamometer; any Magtrol Dynamometer Controller and M-TEST Software for more demanding motor test applications. Single/Three-Phase Capabilities:For single (7510) or three-phase (7530) power measurements Ranges:Up to 600 Vrms @ 20 A continuous duty Interfaces:USB & GPIB/IEEE-488 & Ethernet Data Transfer Rates:Up to 100 per second Accuracy:Up to 0.1% Vacuum Fluorescent Display:High-quality, easyto-read, customizable readout displays volts, amps, power and power factor Measurement:Continuous or cycle-by-cycle Bandwidth:DC up to 80 kHz Input Power:Accepts 85/264 Vrms, 60/50 Hz power at 20 VA max Auto Ranging:Automatically scales instrument for most accurate range Isolation: 1000 Vrms to earth, 750 Vrms line-to-line Average:Displays running average of amps, volts and watts Peak Hold:Stores the highest value read. Values can include amps, watts and volts in any combination Calibration Certificate:NIST Traceable Rack Mounting:19” (482.6 mm) with handles

The small size encoders series E40 feature great accuracy and compact size. The incremental encoder E40 can be supplied with different mechanical flanges: the type E40 has 6 fixing holes on diameter 30 mm, while the type 40A has 4 holes on diameter 25.4 mm; the encoder E40V has a front fixing screw, and the series E40Q is provided with a square flange of mm 43×43. The types E40M and E40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (E40 or E41). The series standard case is out of ABS plastics, with axial or radial cable or connector outlet; series RE40 with aluminium housing and IP65 radial cablepress outlet is also available. Pulses per revolution range :2 to 12500 Supply:5Vdc or 8/24Vdc Output signals:push-pull, line driver

Lens D20 F50.8 is installed inside the laser head of the machine with a seat size (diameter) of 20 mm. Chamfered edges eliminate the risk of scratches and chips during installation. The average focal length of the lens is 2 inches, which allows processing non-metallic materials with high detail. Focus lenses made of zinc selenide. These are lenses of high quality and increased hardness. It require careful and careful handling, special measures during installation, replacement and operation.

Thermal imaging system designed to monitor rotary cement kiln, detect hot spots - Kiln shell temperatures are monitored along the entire length of the kiln. The infrared line-scanning system detects kiln hot spots due to refractory loss, damage, or wear. Data from up to 4 scanners or individual point sensors (optionally used to monitor the burning zone and tire slips) can be seamlessly integrated into one complete thermal image. Detect abnormal operating conditions such as faulty flame position and shape! Optimize and manage kiln maintenance! Extend the operational life of kiln and refractory! Automated kiln and refractory monitoring Visualisation on PC Ethernet TCP/IP interface PC-independent alarm output Analog outputs 3 x 4 – 20mA To ensure reliable operation in even the harshest kiln environments, the MP150 linescanner, which is used in the CS210 thermal imaging system system, is designed with a rugged cast aluminum housing and mounted in a robust stainless-steel enclosure. Measured temperature range:100...650 °C (burning zone 700...1800 °C) Temperature resolution:0.1 K Accuracy:±0.5% of reading or ±3 °C Spot detection (50% of energy):450 : 1 (2.2 mradians) Sampling rate:1024 pixel per scan line (2048 for CS212) Ambient operating temperature:-40...45 °C (no direct sunlight) Ambient temperature - position indicator:-25 to 230 ºC Zone alarms:48 software, 3 hardware (PC independant) Kiln rotation rate:Up to 10 rpm LRM accessory:Supports up to 6 tires Fan Control accessory:Supports up to 16 fans per module (48 total) Communication:Ethernet TCP/IP Analog output:3 x 4 – 20 mA Alarm output:Relay, contacts: 30 V, 1 A Power supply:24 VDC ± 25 %, 1 A

The PD200 is a professional impulse current measuring system to detect leak (holes) in non-conductive sealing systems and is suitable for leak detection on balconie, pond liners/swimming pools or flat roofs. In contrast to the previous model PD100, the PD200 has extremely compact dimensions - the size of the device could be reduced by more than 30%! These compact dimensions enable the transport of the PD200 e.g. through so-called safety ladders to the corresponding flat roof.The impulse current measuring system easily wins the weight comparison with its previous model. Although the single components partially are pretty heavy (e.g. the transformer), the total weight could be reduced by about 20% (from 11.2 kg to 8.6 kg). On top of the housing there are clearly visible signal lamps - one standard impulse signal (green) and one short-circuit signal (red), incl. integrated tone generator. Detected fluid:water Other characteristics:with visual alarm Applications:for flat roofs

Pour les liquides dans les applications de process de base L'OPTIWAVE 5400 est un transmetteur de niveau radar (FMCW) 2 fils 24 GHz pour liquides dans les applications de process de base. Il a été spécialement conçu pour réaliser des mesures de niveau sans contact en continu aussi bien dans la chimie, la pétrochimie que le pétrole & gaz. Equipé d'une antenne Drop en PP éprouvée, il est insensible à la condensation et aux produits corrosifs mais il existe également avec une antenne conique métallique. Grâce à sa dynamique élevée, ce radar 24 GHz peut mesurer des distances allant jusqu'à 100 m / 328 ft. Fluide::de liquide Technologie::radar FMCW Affichage::numérique Plage de mesure::0…100 m / 328 ft Température::Jusqu'à +130°C / +266°F Pression::16 barg / 232 psig

Ceci est une base appliquée aux pièces d’usinage mécanique optique, après 4 axes CNC pièces d’usinage, après le traitement de la surface sans marques d’outil de traitement évidentes.

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained. Country of origin:Germany Inline Inspection: :100% Laser wavelength:blue 405nm or 450 nm, red 650 nm

These interconnection cables, produced with high quality oxygen-free copper wires and specially blended PVC, have a high level of flexibility and they can be used safely in the interconnections of sound, music and professional sound systems in dynamic places such as studios and stages.

watermeters, halve fittingen, afdichtingen, watermeterreducties en -verlengingen

Traitements prédictifs et préventifs des équipements

Ce manomètre sec tout inox permet de mesurer la pression des fluides gazeux, liquides agressifs, non visqueux et non cristallisants et même dans les environnements agressifs. En cas de dysfonctionnement, la surpression peut s’échapper depuis le dispositif de purge à l'arrière du boitier. BENE INOX propose également 2 types de liquide de remplissage compatible avec ce manomètre sec tout en inox : Glycérine : pour les températures fluide allant jusqu’à +100°C Glycérine : pour les températures fluide allant jusqu’à +180°C Norme de raccordement ::EN 837-1 Température ambiante ::de -40° C à +60°C sans remplissage | de -20 à +60°C avec glycérine Température maximale fluide ::de 200°C sans remplissage | de +100°C avec glycérine Plage de pression ::de -1/0 à 0/1000 bar Précision ::Classe 1.6 pour Ø63 - Classe 1 pour Ø100 et Ø160 Matière : :Tube et raccord en inox 316L – Boitier inox Indice de protection ::IP65

Designed for extreme ambient conditions, the sensors of this EGE product family have been proven for more than 40 years in the most varied areas. The proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. These inductive sensors cope without problems with constantly changing temperatures, flooding, vibration, cleaning processes using high pressure cleaners and temperature up to 120°C. These properties are, for example, in demand when used in the steel industry. Because our sensors are always flushed with rolling emulsion during operation, the chemical resistance of the materials used and a high IP class are also essential. They are also ideal for outdoor applications.

Développement sur-mesure de presses: - Presse hydrauliques à plateaux chauffants - Régulation pression - Régulation température - Dimensionnement de l'équipement suivant l'application 500 x 500:100 tonnes 200 x 300:60 tonnes 500 x 500:200 tonnes