Produkty dla kabel i sieć (221)

High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television. Type:TELASS CSF 165(A+)-FRNC Product Number:3895 Purpose of use:Ground cable (CATV) Jacket material:FRNC Diameter (mm):10.00 CPR/DOP:Eca Country of origin:Germany

SAT cables are used for the connection between satellite antenna and TV receiver. Signals are transmitted with the lowest attenuation losses. Good workmanship ensures the best signal transmission and a long service life. Our quality "made in Germany" avoids unnecessary signal losses and ensures interference-free reception on your device. Type:Telass 3000 A++-PE 3,5/5,0 FRNC Product number:3476 Purpose of use:Combined cables (CATV / FTTx) Jacket material:FRNC Diameter (mm):14,7x7x2 CPR/DOP:Eca Country of origin:Germany

bedea CATV-Cable TELASS® 3000 (A++) - PE. According to EN 50117-2-4 - coaxial cables for cable distribution systems, Indoor cable in the range from 5 MHz to 3000 MHz, shielding class A++ according to KDG 1 TS 153 test. High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television. Type:Telass 3000 PE Product Number:3866 Purpose of use:Radio, television and satellite reception technology. Jacket material:PE Diameter (mm):6.80 CPR/DOP:Eca Country of origin:Germany

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used. Type:NFP 0802 CA Product number:1061 Purpose of use:Audio cable Jacket material:PVC Diameter (mm):4,8 x 2,1 Country of origin:Germany

Kable mikrofonowe łączą mikrofony z konsoletami mikserskimi, wzmacniaczami lub kartą dźwiękową. Kable zostały zaprojektowane tak, aby zapewnić, że sygnały audio lub cały słyszalny zakres częstotliwości są przesyłane prawie bez zniekształceń lub innych zakłóceń. Warunkiem tego jest odpowiednia konstrukcja kabla i możliwie niska pojemność1). Zwykle mają jeden rdzeń (połączenie niezrównoważone) lub dwa rdzenie (połączenie zrównoważone), każdy typ ma całkowitą pojemność ekranu. Nasza gama produktów rozciąga się od mini kabli o średnicy zewnętrznej zaledwie 2,2 mm do kodowanych kolorami, nie zgniatających się, a jednocześnie bardzo elastycznych kabli do profesjonalnego sprzętu muzycznego, obejmując prawie wszystkie możliwe zastosowania. Przekroje wynoszą od 0,14 mm² do 0,75 mm².

Microphone cables connect the microphone to a mixer, amplifier or sound card. The aim is to achieve a transmission that is as free of noise and crackling as possible over the entire audible frequency range. The prerequisites for this are a sensible cable design and the lowest possible cable capacity. Typical are 1-wire (asymmetrical connection) or 2-wire constructions (symmetrical connection) with overall shielding. Our product range extends from mini-cables with a diameter of only 2.2 mm to the step-resistant, coloured and highly flexible professional musician's cable and thus covers practically all conceivable applications. The core cross sections are between 0.14 mm² and 0.75 mm². Type:NFR 5002 BG Product number:1077 Purpose of use:Audio cable Jacket material:PVC Diameter (mm):5.70 Country of origin:Germany

Les câbles de microphone relient les microphones aux consoles de mixage, aux amplificateurs ou à une carte son. Les câbles sont conçus pour assurer une transmission des signaux audio ou de la gamme complète des fréquences audibles presque sans distorsion ou autres perturbations. La condition préalable pour atteindre cet objectif est une construction de câble adéquate et une capacité1) aussi faible que possible. Ils ont généralement une âme (connexion asymétrique) ou deux âmes (connexion symétrique), chaque type ayant une capacité globale de écran. Notre gamme de produits va des mini-câbles d'un diamètre extérieur de 2,2 mm seulement aux câbles à code couleur, sans écrasement mais néanmoins très flexibles, destinés aux équipements musicaux professionnels et couvrant ainsi presque toutes les applications possibles. Les sections vont de 0,14 mm² à 0,75 mm².

High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television. Type:Telass 100 PE Product number:1429 Purpose of use:Radio, television and satellite reception technology. Jacket material:PE Diameter (mm):6.80 CPR/DOP:Fca Country of origin:Germany

Microphone cables connect the microphone to a mixer, amplifier or sound card. The aim is to achieve a transmission that is as free of noise and crackling as possible over the entire audible frequency range. The prerequisites for this are a sensible cable design and the lowest possible cable capacity. Typical are 1-wire (asymmetrical connection) or 2-wire constructions (symmetrical connection) with overall shielding. Our product range extends from mini-cables with a diameter of only 2.2 mm to the step-resistant, coloured and highly flexible professional musician's cable and thus covers practically all conceivable applications. The core cross sections are between 0.14 mm² and 0.75 mm². Type:2202-110 Profi Product number:2487 Purpose of use:Audio cable Jacket material:PVC Diameter (mm):6.00 Country of origin:Germany

Los cables de micrófono conectan los micrófonos a las mesas de mezclas, los amplificadores o la tarjeta de sonido. Los cables están diseñados para garantizar que las señales de audio o toda la gama de frecuencias audibles se transmitan casi sin distorsión ni otras perturbaciones. El requisito previo para ello es una construcción de cable adecuada y la menor capacitancia posible1). Suelen tener un núcleo (conexión desequilibrada) o dos núcleos (conexión equilibrada), y cada tipo tiene una capacidad global de pantalla. Nuestra gama de productos abarca desde los minicables con un diámetro exterior de sólo 2,2 mm hasta los cables codificados por colores, no estrujables y muy flexibles, para equipos musicales profesionales, que cubren casi todas las aplicaciones posibles. Las secciones transversales van de 0,14 mm² a 0,75 mm².

SAT cables are used for the connection between satellite antenna and TV receiver. Signals are transmitted with the lowest attenuation losses. Good workmanship ensures the best signal transmission and a long service life. Our quality "made in Germany" avoids unnecessary signal losses and ensures interference-free reception on your device. Type:TWIN-SAT A++ Product Number:3836 Purpose of use:Twin-SAT Drop Cable for Satellite TV Jacket material:PVC Diameter (mm):14,2x7,0 Country of origin:Germany