Produkty dla na produkty (1781)

AminCat BDMAEE is a colourless to light yellow liquid which has C8H20N2O as chemical formula. It is a tertiary amine and one of the most active amine blowing catalysts available. AminCat BDMAEE is also known as Bis[2(N,Ndimethylamino)ethyl] ether and N,N,N’,N’tetramethyl2,2′oxybis(ethylamine). Availability Europe and United States Provided AminCat BDMAEE is on stock in our local warehouses our lead time is about one week if delivered in 170 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:3033-62-3 EC number:221-220-5 HS code:2922 19 00 Assay:≥98.50 % Water:≤0.30 % Density:0.87 @ 20 °C Flash point:68 °C @ 99.86 kPa ± 4.07 Partition coefficient (log pow):-0,54 Solubility in water:1 000 000 mg/L @ 25 °C Vapour pressure:0.99 hPa @ 25 °C Viscosity:0.05153 mm2/s @ 20 °C

Iniper 64 (Azobisisobutyronitrile) is an white solid which has C8H12N4 as chemical formula. Iniper 64 is used as initiator predominantly for bulk, solution, suspension and emulsion polymerisation of a wide variety of monomers. Polymers produced in this way are used for different applications such as fibres, sheets, coating resins flocculants etc. The polymerisation of the monomers used is initiated by the free cyanoisopopyl radicals which are formed upon thermal decomposition of Iniper 64. It does not form oxygenated residues as it is the case with peroxides and does not cause oxidative degradation of pigmented or dyed polymer compositions such as paints, coatings, fibres and sheets. Availability Europe Iniper 64 (AIBN) is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:78-67-1 EC number:201-132-3 HS code:2927 00 00 Appearance:White crystal powder / granules Assay:≥99.00 % Methanol insoluble:≤0.01 % Volatile matter:≤0.10 % Water content:≤0.50 % Density:1.098 kg/m3 @ 22.60 °C SADT:64 °C Partition coefficient (log Pow):2.87 @ 20 °C Solubility in water:Insoluble (< 0.10 mg/l) Vapor pressure:0.81 Pa @ 25 °C

Enox 10150Dpd (25Dimethyl25ditertbutylperoxyhexane on silica, 50%) is a white powder which has C16H34O4 as chemical formula. It is used to for the crosslinking of natural rubber, synthetic rubber (such as silicone rubber) and as modification agent of polypropylene degradation. 2,5Dimethyl2,5di(tertbutylperoxy)hexane is also known as ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide, 2,5Dimethyl2,5bis(tertbutylhydroperoxy)hexane and Ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide. Availability Europe Provided Enox 10150DPD is on stock in our local warehouses our lead time is about one week if delivered in 25 KG drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:78-63-7 EC number:201-128-1 HS code:2909 60 00 Appearance:White powder Assay:49.00 – 51.00 % Active oxygen:5.50% Density:0.30 – 0.50 g/cm3 Bulk density:450 kg/m3 @ 20 °C SADT:80 °C Solubility in water:Insoluble (< 0.1 mg/l) Vapour pressure:2 kPa @ 25°C

Catonium ETPB (Ethyltriphenylphosphonium Bromide / CAS 1530321) is a white to offwhite crystalline powder. Its chemical formula is C20H20BrP and it is mainly used as phase transfer catalyst in the production of epoxy resins and powder coatings. It can also be used as pharmaceutical intermediate in several synthetic processes.This material is highly soluble in water and polaric solvents. Ethyltriphenylphosphonium Bromide is also known as BETP, ETPB, ETPPB, ETPPBr, TEP and TREP. Availability Europe / United States CatOnium ETPB is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:1530-32-1 EC number:216-223-3 HS code:2931 39 90 Assay:≥ 98.00 % Melting Point:203 – 209 °C Water content:≤0.50 % Loss on drying:≤0.50 % Boiling point:355 ºC @ 960 hPa Bulk density:766 kg/m3 Melting point:202.50 ºC at 101.3 kPa Partition coefficient (log Pow):-0.698 @ 35 ºC (pH 4.65) Solubility in water:42.9 g/l (25 ºC) Vapor pressure:0.000158 Pa (25 ºC)

Iniper AIVN SG2000 (Azobismethylbutyronitrile) is an white solid which has C10H16N4 as chemical formula.It finds its application as polymerzation initiator of amongst others acrylics and styrenes. Further it is also used in the production of foams to create nitrogen bubbles. Iniper 67 is significantly more soluble in organic solvents than Iniper 64 (AIBN) . Azobismethylbutyronitrile is also known as 2,2’Azobis(2methylbutyronitrile), 2,2′(Diazene1,2diyl)bis(2methylbutanenitrile) and AMBN. Availability Europe Iniper AIVN 2000 is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:13472-08-7 EC number:236-740-8 HS code:2927 00 00 Appearance:White powder / granules Assay:≥98 % Insoluble in isopropanol matter:≤0.20 % Loss on drying:≤0.50 % Water content:≤0.50 % Density:1.130 kg/m3 SADT:45 °C Melting point:48 ~ 52 °C Partition coefficient (log Pow):2.07 @ 20 °C (pH ≥ 6.99 – ≤ 7.19) Solubility in water:392 ± 5 mg/L @ 20 °C Vapor pressure:0.006 Torr @ 25 °C / 0.78 Pa

Enox DCBP (Bis24Dichloro BenzoylPeroxide) is a white homogeneous paste in 50% silicone oil. This diacyl peroxide has C14H6Cl4O4 as chemical formula and is mainly used for low temperature crosslinking of silicone rubbers .The compounds can be cured without external pressure (hot air and/or IR crosslinking). Bis (2,4Dichloro Benzoyl) Peroxide is also known as 2,4Dichlorobenzoylperoxide and peroxide, bis(2,4dichlorobenzoyl). Availability Europe Enox DCBP is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:133-14-2 EC number:205-094-9 HS code:2916 39 00 Appearance:White to yellowish paste Assay:49.0 – 52.0 % Active oxygen:2.06 – 2.1 % Free chlorine:≤0.05 % Acidity as 2,4 dichlorobenzoic acid:≤0.5 % Volatile matter:≤1.5 % Relative density:1.25 @ 25 °C SADT:60 °C Solubility in water:Insoluble (<0.1 mg/l) @20°C

ViaCat 400 (Dibutyltin diacetate) is a colourless to yellowish substance which has C12H24O4Sn as chemical formula. It is liquid at room temperature and is used as catalyst for room temperature crosslinking of silicon / rubber sealants, polyurethane coatings and for esterification and transesterification reactions. Dibutyltin diacetate s also known as diacetoxybutyltin, dibutyltin di(acetate) and bis(acetyloxy)dibutylstannane Availability Europe and United States Provided ViaCat 400 (DBTDA) is on stock in our local warehouses our lead time is about one week if delivered in 25 KG drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:1067-33-0 EC number:213-928-8 HS code:2931 90 80 Tin content:≥33.00 % Viscosity mPa.s:≤50 Boiling point:130 °C @ 0.67 kPa Density:1.310 g/l @ 20 °C Flash point:150.50 °C Melting point:9 °C Partition coefficient (log Pow):3.39 Solubility in water:Moderately soluble ( (0.40 g/l ) Vapour pressure:2.4 x 10-3 Torr = 0.32 Pa @ 20 °C

The wind energy industry requires precise lifting solutions in many different situations, during production, transport, and construction. All parts of the windmill need handling at one point. The parts have considerable dimensions and must be lifted with care to avoid damage. We offer unique lifting solutions that are an excellent fit for the wind energy industry. All our lifting solutions are unique and designed for a specific situation. Our equipment is used to lift the steel plates of the windmill tower, to lift and turn the spare cabs of the windmill blades, to laminate the windmill blades, to demould prefabricated blades and to lift the long windmill blades itself. Effortless and precise lifting by vacuum handling Aerolift is known worldwide for its customised (vacuum) lifting solutions. Most of our lifting solutions are based on vacuum lifting technology due to many advantages compared to other lifting methods.

SilQon OCTEO ( Octyltriethoxysilane ), is a colorless clear liquid which has C14H32O3Si as chemical formula, is used in polymer preparations, coatings, personal care and household products, tyre production and sealants. Octyltriethoxysilane is also known as octyltriethoxysilane and triethoxyoctylsilane. Availability Europe and United States Provided {{Product}} is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2943-75-1 EC number:220-941-2 HS code:2931 90 00 Assay:≥ 98.00 % Color (Pt-Co):≤ 30 Refractive index:1.4090 – 1.4190 Boiling point:259.60 ºC Bulk density:0.876 g/cm3 @ 25 ºC Flash point:45 ºC @ 1013 hPa Log Pow:5.6 @ 20 ºC Solubility in water:0.79 mg/l @ 20 ºC Vapor pressure:0.11 Pa @ 25 ºC

Iniper MAI (Dimethyl 2,2′azobis(2methylpropionate)) is an white solid which has C10H18N2O4 as chemical formula. Iniper MAI is used as polymerization in the production of polyols and polyester polyols, it is a nonnitrile azoinitiator which is soluble in a wide variety of organic solvents. This substance is also known as 2,2Azobisisobutyric acid dimethyl ester and Dimethyl 2,2′(diazene1,2diyl)bis(2methylpropanoate). Availability Europe Iniper MAI ( Dimethyl 2,2′azobis(2methylpropionate) is on stock in our local warehouses. Our lead time is about one week if delivered in 20KG carton boxes. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2589-57-3 EC number:219-976-6 HS code:2927 00 00 Appearance:Light yellow or dark-white crystal granules Assay:≥98.00 % Fe:≤ 500 ppm MMA (HPLC):≤0.80 % Water:≤1.00 % Density:1.060 kg/m3 SADT:35 °C Melting point:22 – 28 °C Partition coefficient (log Pow):1.34 @ 20 °C Solubility in water:Insoluble Vapor pressure:0.0244 mmHg @ 25 °C

Thanks to the specific reactivity of the 2aminoethylaminopropyl structure, using SilQon DAMO as an adhesion promoter in Glass – fiber reinforced or fillermodified plastics reduces the filler’s sedimentation tendency and improves dispersibility and numerous mechanical properties (e.g. flexural strength, tensile strength, modulus of elasticity) of the composites. The use of SilQon DAMO in these materials also results in a markedly improved resistance to water (vapor) and corrosion. Electrical properties, such as volume resistivity and the dielectric constant, are also positively influenced. Availability Europe SilQon Damo is on stock in our local warehouse. Our lead time is about one week if delivered in 190 Kg steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:1760-24-3 EC number:217-164-6 HS code:2931 90 00 Assay:≥ 97.0 % Refractive Index:1.4405 ~ 1.14450 Boiling point:240 ºC @ 101 325 Pa Density:1.0 g/cm3 (20 ºC) Flash point:120 ºC @ 101 325 Pa Melting point:< -97.8 ºC Log Pow:-0.820 Solubility in water:1 000 000 mg/L (20 ºC) Vapor pressure (MGM):0 Pa (25 ºC)

27D Gel bestaat uit 250+ mooie kleuren met en zonder glitter, holographic of cat eye. De gellak is hoog gepigmenteerd en altijd dekkend in twee dunne laagjes. Is geschikt voor het verstevigen van de natuurlijke nagels maar ook voor acryl of gelnagels. Blijft 3 weken mooi zitten. Uitharding: UV Lamp 2 minuten Led Lamp 30 seconden

Viacat 4100 (Monobutyltin Oxide) is a white powder which has C4H10O2Sn as chemical formula. It is an noncorrosive organotin compound which can be used in the synthesis of saturated polyester in powder coatings, insulating varnishes and coil coatings. Monobutyltin Oxide is also known as butylhydroxostannane, butylstannonic acid and butylhydroxytin oxide. Availability Europe and United States ViaCat 4100 (MBTO) is on stock in our local warehouses in both Europe and United States. Our lead time is about one week if delivered in 25 KG drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2273-43-0 EC number:218-880-1 HS code:2931 90 00 Tin content:54.80 – 59.50 % Chlorine content:≤1.00 % Volatility:≤1.00 % Boiling point:>350 °C Density:1.46 g/cm3 Flash point:116.00 °C Auto ignition temperature:-510 °C Partition coefficient (log Pow):0.20 Solubility in water:Insoluble (< 0.1 mg/l) Vapour pressure:0.0000013 kPa

Pinacolone is a colorless clear liquid which has C6H12O as chemical formula. This substance is an unsymmetrical ketone and is used as intermediate in the production of pharmaceuticals and pesticides. Pinacolone is also known as 3,3dimethylbutanone and tertbutyl methyl ketone. Availability United States We have regular sales of this substance, this product can be stocked upon request. In this case our delivery time is about 1 week. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. We don’t supply this substance to EU customers. CAS number:75-97-8 EC number:200-920-4 HS code:2914 19 90 Appearance:Colorless clear liquid Assay:≥97.00 % Water:≤1.00 % Refractive index:1.3952 Boiling point:106.10 ºC @ 1.013 hPa Flash point:5 ºC Partition coefficient (log Pow):1.20 @ 20 ºC Solubility in water:19 g/l @ 25 ºC Vapour pressure:31.5 mm Hg @ 25 ºC

AminCat TEDA (triethylenediamine) is a white solid which has C6H12N2 as chemical formula. It is a very strong polyurethane catalyst that can be used in a variety of polyurethane applications. Triethylenediamine is also known as 1,4Diazabicyclo[2.2.2]octane, DABCO or TEDA. Availability Europe and United States Provided AminCat TEDA is on stock in our local warehouses our lead time is about one week if delivered in 25 KG drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:280-57-9 EC number:205-999-9 HS code:2933 59 20 Assay:≥99.0 % Water:≤1.0 % Boiling point:173.4 °C @ 101 325 Pa Flash point:62.2 °C @ 101 325 Pa Melting point:158 °C @ 101 325 Pa Solubility in water:610 g/L @ 25 °C Vapour pressure:0.43 hPA @ 25 °C

The curing mechanism between Vicura MC68 (Pyromellitic Acid Diphenyl Imidazoline Salt) and the epoxy resin is complex. Two parallel processes are taking place; direct reaction between the imidazoline and the epoxy group and homopolymerization of the epoxy resin that is catalyzed by Vicura MC68. Compared to most of the powder coating systems where the optimal ratio between the crosslinker and the binder is close to the stoichiometric one, in the case of Vicura MC68 the optimal ratio is generally determined empirically. For epoxy resins that are typically used for powder coatings (epoxy equivalent weights between 700 – 1000) amounts of 8,0 – 10,0 % of Vicura MC68 are recommended as good starting points. Also available with added calcium carbonate (Vicura MC68L) Availability Europe Vicura MC68 is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG carton boxes. CAS number:54553-90-1 EC number:259-224-2 HS code:2933 2990 90 Appearance:White or yellow fine powder Assay:≥99.00 % Melting range:220 – 230 °C Water content:≤0.50 % Boiling point:>201 ºC @ 1 atm Buk density:1.540 kg/m3 Melting point:>210 – < 235 ºC at 1 atm Partition coefficient (log Pow):1 @ 25 ºC Solubility in water:3 g/l @ 20 ºC / PH 2.9 Vapor pressure (MGM):0 kPa @ 25 ºC

AminCat PMDETA catalyst (Pentamethyldiethylenetriamine) is a highly active, pure liquid tertiary amine which has C9H23N3 as chemical formula. This substance is suitable for use as a blowing catalyst in a number of applications. Pentamethyldiethylenetriamine is also known as PMDETA, PMDTA, PMDT and N[2(dimethylamino)ethyl]N,N’,N’trimethylethane1,2diamine. Availability Europe and United States Provided AminCat PMDETA is on stock in our local warehouses our lead time is about one week if delivered in 170 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:3030-47-5 EC number:221-201-1 HS code:2921 29 00 60 Assay:≥99.00 % Water:≤0.25 % Boiling point:199 ºC @ 1.016.705 hPa Flash point:76 ºC @ 101.3 kPa Melting point:-20 ºC Solubility in water:Soluble Vapour pressure:1.02 hPA @ 37.1 @ 20 ºC

Catonium TPPBr (Tetraphenylphosphonium Bromide) is a white to offwhite, its chemical formula is C24H20BrP. TPPBr is a quaternary phosphonium salt mainly used in pharmaceuticals, as accelarator for fluoroelastomers , adhesion promotor for fluoroelastomers and curative of polyacrylate polymers which extends the shelf life of the compound and decreases the mould fouling. This material is highly soluble in water and slightly soluble in alcohols. Tetraphenylphosphonium Bromide is also known as TPP, TPPBr, TPPB and TPPBr. Compared to amines, imidazoles and quaternary ammonium salts CatOnium TPPBr features considerable better latency and thermal stability Further it offers a low odor, minimal color formation and controlled reactivity. Availability Europe and United States Provided CatOnium TPPBr is on stock in our local warehouses our lead time is about one week if delivered in 25 KG drums. CAS number:2751-90-8 EC number:220-393-4 HS code:2931 39 00 Assay:≥ 99.00 % Loss on drying:≤ 1.00 % Triphenyl phosphine:≤ 0.50 % Boiling point:457.77 ºC Flash point:> 260 ºC Melting point:294 – 297 °C Log Kow:5.28 Solubility in water:Soluble @ 20 ºC Vapor pressure:4.2E-005 Pa

Quartzene® Z1 hydrophobic powder is the ultimate performance insulation material. It can be used as an additive in industrial, construction and coating products for improved thermal and acoustic insulation. Quartzene® Z1 can be tailor made to meet specific functions depending on the application and performance required. CAS number:68909-20-6 EC number:272-697-1 HS code:2811 Sensitivity:Hydrophobic Appearance:White powder Assay:≥ 90.00 % Tapped density:0.08 - 0.12 g/ml Surface area (SBET):150-300 g/m2 Particle size range:1-40 µm Pore size range (DFT):1-50 nm Porosity:94 - 96% Temperature range @Patm:-200°C ~ 250°C Thermal conductivity @20°C and Patm:0,025-0,027 W/m,K

27D Gel bestaat uit 250+ mooie kleuren met en zonder glitter, holographic of cat eye. De gellak is hoog gepigmenteerd en altijd dekkend in twee dunne laagjes. Is geschikt voor het verstevigen van de natuurlijke nagels maar ook voor acryl of gelnagels. Blijft 3 weken mooi zitten. Uitharding: UV Lamp 2 minuten Led Lamp 30 seconden

Onze nagels, ze zijn een onmisbaar deel van onze uitstraling. Maar ken je dat gevoel van trekkerige, broze en breekbare nagels? Kleine velletjes en harde randjes rondom je nagel die het bijna aanlokkelijk maken om ze te gaan bijten of te knippen? Dit is waar nagelolie in het spel komt. In dit artikel duiken we diep in de wereld van nagelolie, een essentieel product voor iedereen die streeft naar gezonde, sterke en mooie nagels. Wat is Nagelolie? Nagelolie, ook wel bekend als cuticle oil, is een wonderbaarlijke oplossing die je huid rond de nagelplaat hydrateert, versoepelt en beschermt. Deze speciale olie zorgt ervoor dat je nagelriemen niet uitdrogen, waardoor de kans dat bacteriën kunnen binnendringen en je nagelwortel (matrix) ontsteken, verlaagt. Als je al uitgedroogde nagelriemen hebt, kan nagelolie helpen bij het genezingsproces en het versnellen

In most polymers, Rostabil TNF (Trisnonylphenol phosphite) is a cost effective, high purity stabilizer that improves color and processing stability during recovery, drying, compounding, processing and end use. Synergism is realized when it is combined with other stabilizers such as hindered phenols. It may be added alone or in combination with the monomers and / or in antioxidant emulsions during recovery and / or during compounding. TNF is excellent in preventing gel formation polymerization, finishing, storage and factory processing. TNF is a versatile phosphite stabilizer which is useful in a large number of polymers such as polyethylene, polypropylene, polystyrene, HDPE, LLDPE, SBR, ABS, PVC and others. TNPP is also a suitable stabilizer for a myriad of elastomers such as SBR, NBR and SIS. It is highly effective in light colored solution and emulsion polymerized elastomers. The use of the TNF phosphite is sanctioned by the Food CAS number:26523-78-4 EC number:247-759-6 HS code:2920 29 00 Acid Value:≤0.3 (mg KOH/gm) Colour:≤60 (Hazen) Free nonylphenol:≤3.0 % Phosphorus content:4.30% Boiling point:>300 °C @ 102 kPa Decomposition temperature:322 °C under nitrogen Flash point:207 ºC @ 1 atm Melting point:+/- 6 ºC Partition coefficient (log Pow):21.60 ± 0.60 Refractive index:1.527 – 1.533 @ 25 °C Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:0.975 – 0.998/m3 (25 °C/15 °C) Vapour pressure:0.000000000005 Pa

SilQon OPCTS ( Octaphenylcyclotetrasiloxane ) is a white solid which has C48H40O4Si4 as chemical formula. It can be used for synthesizing pharmaceutical intermediates and organic silicone intermediates, especially for high temperature resistant phenyl silicone oil and other polymers. Octaphenylcyclotetrasiloxane is also known as phenyl D4. Availability United States Provided SilQon OPCTS is on stock in our local warehouse our lead time is about one week if delivered in 100 Kg drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. Not available in EU countries. CAS number:546-56-5 EC number:208-904-9 HS code:2931 90 00 Assay:≥ 98.00 % Boiling point:332 ºC Bulk density:1.185 g/cm3 @ 25 ºC Flash point:200 ºC Log Pow:5.09 Solubility in water:Insoluble in water Vapor pressure:7.23e-11 mmHg

Enox BPO 75W (Dibenzoyl Peroxide 75%) is a white particle moistened with 25% water. This diacyl peroxide has C14H10O4 as chemical formula and it is used as initiator for the (co)polymerization of styrene, acrylonitrile, acrylates, methyacrylates and vinylacetate. Further it is being used to cure unsaturated polyester, vinyl esther and acrylic thermosetting resins at ambient temperatures. Dibenzoyl peroxide also so known as benzoyl peroxide, BPO and benzoperoxide. Availability Europe Enox BPO 75W is on stock in our local warehouses. Our lead ime is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:94-36-0 EC number:202-327-6 HS code:202-327-6 Appearance:White particle Assay:72.0-76.0 % Active oxygen:4.75-5.02 Cl:≤0.20 % Free acid (as C6H6COOH):≤0.30 % (In)organic hydrolysable Cl:≤0.25 % Water:≥ 23.0% Melting point:103 – 105 20 °C @ 1.013 hPa Partition coefficient (log Pow):3.43 @ 20 °C Relative density:1.33 @ 25 °C SADT:80 °C Solubility in water:Slightly soluble (9 .1 mg/l) @ 25 °C Vapour pressure:< 1mm Hg @ 20 °C

27D Gel bestaat uit meer dan 250 prachtige kleuren met en zonder glitter, holografische effecten of cat eye effecten. De gel nagellak is hoog gepigmenteerd en altijd dekkend in twee dunne lagen. Het is geschikt voor het versterken van natuurlijke nagels, evenals voor acrylnagels of gelnagels. Het blijft prachtig zitten voor 3 weken. Uitharden: UV Lamp 2 minuten LED Lamp 30 seconden

We designed a solution for the complete lifting process of the precast concrete sections of a grandstand. From production to construction. The solution consists of two different vacuum lifters. One for the production area to demould, lift and turn. And another which is used at the stadium construction area. Why lifting by vacuum instead of hooks? By origin, all handling during both production and construction was done by hooks. The hooks were installed during production and removed after construction. By vacuum lifting no hooks are required, saving manpower, time, and investment. Moreover, no damage comes to the concrete element and stays smooth and untouched.

ViaCat 4201 (Dibutyltin Oxide) is a white powder which has C8H18OSn as chemical formula. The main applications of DBTO are coatings for automotive and industrial applications (aqueous cathodic electrodeposition) and PVC stabilizers. Further it finds its application as intermediate to produce other organotin compounds like dibutyltin dilaurate. Lastly, it us used in select high temperature transesterification reactions for the production of alkyd resins and powder coating resins. Dibutyltin Oxide is also known as dibutyl(oxo)tin and Dibutyltin(IV) oxide. Availability Europe Provided ViaCat 4201 (DBTO) is on stock in our local warehouses our lead time is about one week if delivered in 25 KG steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:818-08-6 EC number:212-449-1 HS code:2931 90 00 Tin:47.50 +/- 0.50 % Iron:≤0.003 % Sodium chloride:≤0.05 % Volatile matter:≤0.40 % Boiling point:161.90 °C Density:1.58 g/cm3 @ 20 ºC Flash point:No data available Melting point:105 °C log Kow:5.33 @ 20 °C olubility in water:Insoluble (< 0.1 mg/l) Vapour pressure:4×10-6 Pa @ 25°C

A micronized grade of dicyandiamide containing 1.5%1.6% antiblocking agent to inhibit clumping and improve handling. It is used as curing agent for epoxy resins. Due to its high melting point Vicura DICY 100S does not melt during extrusion to produce a homogeneous mixture with the epoxy resin on a molecular scale. Therefore Vicura DICY 100S is supplied with low particle size assuring in this way acceptable homogeneity during the extrusion step, provided the premixing process is done properly. Outstanding features of epoxy powder coatings cured with Vicura DICY100S include excellent adhesion to metal, excellent chemical and solvent resistance, very high impact, abrasion and scratchy resistance, and dielectric properties that make them suitable for many electrical applications. Availability Europe and United States Provided Vicuta DICY 100S is on stock in our local warehouses our lead time is about one week if delivered in 20 KG carton boxes. CAS number:461-58-5 EC number:207-312-8 HS code:2926 20 Appearance:Fine white powder Assay:≥97.30 % Particle size:≥98.00 % <10 μm Moisture:≤0.50 % Anti-caking agent:≥1.60 % Bulk density:1.404 g/cm3 Melting point:≥210 – ≦ 212 ºC Partition coefficient (log Pow):1.00 @ 20 ºC ± 0.50 ºC Solubility in water:4.13 g/100 gram water @ 25 ºC

AminCat DBU ( 1,8Diazabicyclo(5.4.0)undec7ene ) is a clear, light yellow liquid of relatively low volatility which has C9H16N2 as chemical formula. It has only a slight ammonialike odour, is miscible with water and is soluble in most organic solvents. (1,8Diazabicyclo(5.4.0)undec7ene) is also known as 2H,3H,4H,6H,7H,8H,9H,10Hpyrimido[1,2a]azepine. Availability Europe and United States AminCat DBU is on stock in our local warehouses. Our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:6674-22-2 EC number:229-713-7 HS code:2933 59 95 Assay:≥99.00 % Water:≤0.25 % Boiling point:261.86 ºC @ 1.013.25 hPa Bulk density:1.019 kg/m3 @ 20 ºC Flash point:113 ºC Melting point:No mp between -100 ºC and 30 ºC Log Pow:-6.25 @ 25 ºC (pH 4) Solubility in water:1.000 g/l (20 ºC)

Balayeuse à four en bois avec poils en fibres résistant à la chaleur. Ces pelles à long manche sont souvent utilisées dans les boulangeries pour balayer les miettes du fond des fours. La fibre est une fibre végétale, elle provient des feuilles épaisses des plants d’ananas et d’agavan. La balayeuse peut être utilisée aussi bien humide que mouillée. Lors du séchage, les fibres reprennent leur ancienne forme. Numéro d'article:96870