Produkty dla o olej hydrauliczny (37)

It is high quality oil that is formulated with qualified and adhesive additives and with highly refined base oils, and that enables movements of slide ways in machine tools operating under heavy loads to be proper and continuous.

DCT Fluid is a specialized lubricant designed for dual clutch transmissions, commonly referred to as Direct Shift Gearbox (DSG) transmissions. Crafted from premium synthetic base oils, it incorporates a performance-oriented formulation that ensures seamless shifting, anti-shudder capabilities, and enhanced transmission responsiveness. These optimized frictional attributes not only lead to improved fuel efficiency but also offer robust protection for transmission components, minimizing wear and tear. Exceptional load-carrying capacity, anti-wear, and extreme pressure performance. Anti-shudder properties to prevent vibrations on the engine flywheel. Protection against corrosion and foam formation. High-temperature shear stability and oxidation resistance. Enhanced clutch friction and synchronizer durability. Maximum protection during high-stress operating conditions. Promotes improved fuel efficiency compared to traditional transmissions. Available in:Bulk, 20 Litres and 5 Litres Item code:VI3-2674

Hydraulic Oil 32 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 32 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling SAE Grade:32 Viscosity, @ 100ºC, cSt (ASTM D445):7 Viscosity, @ 40ºC, cSt (ASTM D445):32

Automatikgetriebeöl (ATF) für automatische Kfz-Getriebe sowie für Servolenkungen, Flüssigkeitspumpen und Hydrauliksysteme in PKW, LKW, Bussen und Baumaschinen.

Specifically formulated for the lubrication of gearboxes of motor vehicles, agricultural and construction machinery, for which lubricants with EP or anti-wear characteristics are not required. Exceeds the requirements: API GL-4

Spezifikationen / Freigaben ACEA C3 VW 504 00/ 507 00 MB-Freigabe 229.51 BMW Longlife-04 Porsche C30 Eigenschaften: Für Otto- und Dieselmotoren Erfüllt höchste Anforderungen an den Verschleißschutz Aral Low SAPS-Technology für maximale Lebensdauer des Dieselpartikelfilter Für Fahrzeuge mit und ohne LongLife-Service geeignet Spart Kraftstoff und schon Umwelt Spezifikationen / Freigaben ACEA C3 VW 504 00/ 507 00 MB-Freigabe 229.51 BMW Longlife-04 Porsche C30

EXCOR PERIGOL 100 se utiliza para la protección contra la corrosión de metales ferrosos, chapa desnuda o parcialmente galvanizad, hierro fundido y otros tipos de metal. PERIGOL 100 puede aplicarse por inmersión o por pulverización. El aceite anticorrosivo EXCOR PERIGOL 100 tiene un breve tiempo de goteo y su temperatura de aplicación es de hasta 50 grados centígrados. PERIGOL 100 no contiene disolventes y forma sobre la superficie del metal una película aceitosa, no pegajosa que puede eliminarse con medios acuosos alcalinos.

Est une huile de moto à base synthétique qui est formulée avec des huiles de base spéciales pour répondre aux exigences de lubrification des moteurs 4 temps refroidis à l air ou à l eau des scooters. Il offre un haut degré de protection anti-usure pour les composants sollicités et une excellente propreté des pistons, segments, chambres de combustion et bougies, favorisant ainsi longue durée de vie du moteur et maintien des performances.

motor yağı, gres, antifiriz ve motorlu araçlar için madeni yağlar üretmekteyiz.

We Supply Sunflower Oil

Kompressoren wie Hubkolben-, Schrauben- und Vielzellenverdichter erreichen mit Hochleistungskompressorölen von TIPP OIL mehr Funktionssicherheit und längere Lebensdauer Deutschland:Liter Größe:60 Liter Preis:Auf Anfrage

PRODUCCIÓN PROPIA Miel de producción propia. En el centro del Parque natural del Montseny nuestras abejas recolectan el nectar de la flora del parque elaborando una miel de carácter, reconocida por su color oscuro, su alto contenido de minerales y su preciado sabor a montaña y bosque. SELECCIÓN DE MIELES MONOFLORALES Amplia selección de mieles de temporada con origen exclusivo en la peninsula ibérica y cosechadas a partir de nectares monoflorales. Miel de romero, de tomillo, de azahar, de espliego, de castaño, roble,.... SELECCIÓN DE MIELES DE MILFLORES Más oscuras o más claritas, las mieles de mlflores son mieles cosechadas a partir de diferentes nectares o mieladas que la abeja pone a nuestra disposición con sabores y aromas propios de cada zona de origen.

It is high performance, full synthetic gear oil that is developed to be used in synchromesh/non- synchromesh gearboxes and di erentials of passenger vehicles, heavy vehicles and earth movers requiring lubrication in the performance level of API GL-5. It provides excellent performance during four seasons because of its high viscosity index. While it makes shifting easier under very low temperatures, it also provides high lubrication and resistance again stoxidation under very high temperatures. It provides protection again stabrasion even under sudden load shocks due to it excessive pressure feature (EP), and extends its life, and minimizes maintenance costs.

It is semi-synthetic diesel engine oil that is manufactured as a result of combination of high quality synthetic and mineral base oils with additives. It provides perfect protection against corrosion under cold and hot operation conditions. It provides effective lubrication through its high viscosity index and low viscosity feature. No base reduction occurs. It makes acids forming as a result of diesel fuel inflammation ineffective. It prevents formation of harmful residuals. It provides lower maintenance costs and longer service life ranges. Effective cleaning and dispersing additives keep engine clean and cause less harmful exhaust gas release for a cleaner environment. It is compatible with turbo charge vehicles, and with those with catalytic converters.

It is an extra high performance diesel engine oil that helps extend engine life in the most severe on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Exhaust Gas Recirculation (EGR) and Aftertreatment Systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalysts (DOC). It is a unique formulation combining the latest in diesel technology additive packages to provide superior antiwear, anti-corrosion, anti-oxidant protection and exceptional soot control. This unique blend incorporates synthetically fortified base oils to improve engine durability and oil stability at high temperatures.

Hydraulic Oil ISO 100 is good quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives good anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil ISO 100 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling SAE Grade:100 Viscosity, @ 100ºC, cSt (ASTM D445):13 Viscosity, @ 40ºC, cSt (ASTM D445):99.8

L'huile hydraulique ISO 46 est une huile hydraulique de qualité exceptionnelle, développée pour répondre aux exigences de fluides hydrauliques acceptables pour l'environnement. Ce produit est basé sur des esters synthétiques, facilement biodégradables. Un ensemble d'additifs haute performance soigneusement sélectionnés offre d'excellentes propriétés anti-usure et extrême-pression ainsi qu'une bonne stabilité thermique et une protection contre la corrosion. La résistance à l'oxydation intrinsèquement forte anticipe le gommage et l'accumulation de gouttes à des températures élevées. En raison du VI naturel élevé du fluide de base et du point d'écoulement bas, le comportement de la température de viscosité permet une plage de températures de fonctionnement très large. L'huile hydraulique 46 est recommandée en cas de perte accidentelle de fluide dans l'environnement ou lorsque la contamination de l'eau de surface doit être évitée. Les zones d'application couvrent les équipements SAE Grade:46 Viscosity, @ 100ºC, cSt (ASTM D445):9 Viscosity, @ 40ºC, cSt (ASTM D445):47

Performance Standard : API SN/ SM / SL SAE 30 API SN/ SM/SL GASOLINE ENGINE OIL is a heavy duty engine oil primarily intended for use in gasoline automotive engines of passenger cars where a monograde motor oil SAE 30 meeting an API SN, SM, SL or SJ is recommended. Formulated from high quality mineral base oils and an advanced additive system required for combustion engines contains an effective balance of detergents and dispersants to minimize the formation of sludge and deposits, retain alkalinity and reduce wear. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers SAE Grade:30 Viscosity, @ 100ºC, cSt (ASTM D445):10.6 Viscosity, @ 40ºC, cSt (ASTM D445):7.2

Brake Fluid DOT 3 is a excellent performance hydraulic brake fluid. It is use in automotive disc, drum and anti skid brake systems and clutch systems. Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point and viscosity at 40º and 100º C. Applications : Brake fluid dot 3 is developed for use in applications where disc, drum and anti-skid braking systems are used in vehicles requiring DOT 3 level performance. Use only in its concentrated form out of a previously unopened or well sealed container. Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life significantly. Do not reuse drained brake fluid. Brake fluid can affect the vehicle paintwork, so remove spills without rubbing. Brake fluid should be drained from the vehicle every two years or after 40,000 Kms.

Hydraulic Oil 32 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 32 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling,... Hydraulic Oil:32 Colour, ISO 2049:1.5 cSt @ 40ºC:32 Viscosity Index, ASTM D 2270:189 Pour Point, ºC, ASTM D 97:-39 Flash Point, ºC, ASTM D 92:248 Density @ 15 ºC kg/l, ASTM D 4052:911 FZG Scuffing, DIN 51534, A/8.3/90, Fail Stage:12

Refrigeration Oils are developed for refrigeration compressors and systems requiring ozone friendly HFC refrigerants. These Environmental Awareness Lubricants are developed to give: Excellent evaporator cleanliness. Less compressor wear. Low temperature fluidity. High system efficiency and proper oil return in refrigeration system designs. Applications : Refrigeration Oils are hygroscopic and care must be taken to avoid moisture absorption during handling. Packages should be closed properly when not in use, and small packaging should be preferred. Product should not be transferred to plastic containers that can allow moisture ingress. Applications include: Household refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Industrial applications such as food preparation and freezing, as well as cryogenic applications. Commercial refrigeration applications such as business, mall and hotel air conditioning, and low temperature transportation. Refrigeration Oils:15 ISO Viscosity Grade:15 cSt @ 40º C:15.9 cSt @ 100º C:3.6 Viscosity Index, ASTM D 2270:108 Pour Point, ºC, ASTM D 97:-60 Flash Point, ºC, ASTM D 92:236 Specific Gravity @15º C, ASTM D 1298:1.02

El aceite hidráulico ISO 46 es de calidad excepcional, aceite hidráulico de alto rendimiento desarrollado para satisfacer el atractivo de los fluidos hidráulicos ambientalmente aceptables. Este producto se basa en ésteres sintéticos fácilmente biodegradables. Un paquete de aditivos cuidadosamente seleccionados y de alto rendimiento ofrece excelentes propiedades antidesgaste y de presión extrema, así como una buena estabilidad térmica y protección contra la corrosión. La resistencia a la oxidación inherentemente fuerte anticipa el engomado y la acumulación de gotas a las temperaturas más altas. Debido al alto VI natural del fluido base y al bajo punto de fluidez, el comportamiento de la temperatura de la viscosidad permite un rango de temperatura de funcionamiento muy amplio. El aceite hidráulico 46 se recomienda donde podría haber una pérdida accidental de fluido en el ambiente o donde se debe evitar la contaminación del agua superficial. Las áreas de aplicación SAE Grade:46 Viscosity, @ 100ºC, cSt (ASTM D445):9 Viscosity, @ 40ºC, cSt (ASTM D445):47

Norme de performance: API CJ4 / CI4 / CH4 SAE 20W50 API CJ4 / CI4 / CH4 est une huile pour moteur diesel haute performance qui fournit une protection moteur éprouvée aux moteurs diesel fonctionnant dans des applications de service sévères. L'huile pour moteur diesel SAE 20W50 est recommandée pour une utilisation dans une vaste gamme d'applications et d'environnements d'exploitation difficiles dans les secteurs du camionnage, de la construction et de l'agriculture. EVO E - Protection supplémentaire du moteur, de l'embrayage et des engrenages V - Rapport qualité / prix avec un kilométrage supplémentaire de 70% O - Performance exceptionnelle dans tous les temps SAE Grade:20W50 Viscosity, @ 100ºC, cSt (ASTM D445):17.6 Viscosity, @ 40ºC, cSt (ASTM D445):148.9

Performance Standard : API SN/ SM / SL SAE 0W20 API SN/ SM / SL is an advanced full synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. SAE 0W20 API SN/ SM / SL gasoline engine oil meets the requirements of various vehicle manufacturers and industry standards and outperforms conventional oils. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Applications : SAE 0W20 API SN/ SM / SL gasoline engine oil is recommended by DANA Lubes for SAE 5W-20 and 0W-20 applications in all types of gasoline fueled passenger cars, SUV’s, vans, and light trucks. It is engineered to help deliver outstanding engine protection and fuel economy benefits. It is recommended for extreme cold conditions to help deliver quick starts and fast lubrication. It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the... SAE Grade:0W-20 Viscosity, @ 100ºC, cSt (ASTM D445):8.7 Viscosity, @ 40ºC, cSt (ASTM D445):44.8 Viscosity Index:173 Sulfated Ash, wt% (ASTM D874):0.8 HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683):2.7 Phosphorous (ASTM D4951):0.065 Flash Point, ºC (ASTM D92):224 Total Base Number (ASTM D2896):8.8 MRV @ -40ºC (ASTM D4684):9200 Density @15.6ºC g/ml (ASTM D4052):0.841

Performance Standard : API CJ4/CI4/CH4 SAE 10W30 diesel engine oil is an extra high performance diesel engine oil that extend engine life in the most severe on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Exhaust Gas Recirculation and Aftertreatment Systems with Diesel Particulate Filters and Diesel Oxidation Catalysts. Fully backwards compatible, SAE 10W30 will also delivers excellent performance in older conventional engines. As a result, it meets the requirements of API CJ4, CI4 PLUS and CH4 service categories as well as key Original Equipment Manufacturer (OEM) requirements. SAE 10W30 is the result of extensive cooperative development work with major OEMs and is recommended for use in a wide range of heavy duty applications and operating environments found in the trucking, mining, construction, quarrying, and agricultural industries. SAE Grade:10W30 cSt @ 40ºC:79.0 cSt @ 100ºC:11.9 Viscosity Index, ASTM D 2270:145 Sulfated Ash, wt%, ASTM D 874:1.0 Total Base #, mg KOH/g, ASTM D 2896:10.4 Pour Point, ºC, ASTM D 97:-30 Flash Point, ºC, ASTM D 92:230 Density @ 15ºC kg/l, ASTM D 4052:0.87

Performance Standard : API CJ4/CI4/CH4 SAE 0W20 API CJ4/CI4/CH4 Synthetic is extra high performance diesel engine oil that provides excellent lubrications of today’s diesel engine promoting extended diesel engine life. This product meets or exceeds the specifications of all major European and American engine manufacturers. The oil is recommended for use in turbo -charged diesel powered equipment from leading Japanese, European and American manufacturers, mixed fleets, on- highway light and heavy – duty trucking , off highway industries including construction , mining , quarrying and agriculture. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Applications : SAE 0W20 API CJ4/CI4/CH4 Synthetic is recommended by DANA Lubes for 0W20 applications in all types of gasoline fueled passenger cars, SUV’s, vans, and light trucks.

Base Oil SN 300 is a defined as a light grade base oil and is a Grade I base oils. It is generally used in lubricant and lubricant additives production. It has been solvent refined and hydrogen treated to take out impurities. Applications : Base oil SN 300 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils Features : In order to ensure its purity, it has been solvent refined, dewaxed and hydrogen treated oil. It has long shelf life High thermal Stability Free from harmful chemicals. Used in mould oil, transmission fluids, gear oils, metal working fluids and additives.

Estándar de rendimiento: API SN / SM / SL SAE 5W40 API SN / SM / SL EL ACEITE DE MOTOR DE GASOLINA es un aceite de motor sintético avanzado de alto rendimiento, diseñado para ayudar a proporcionar una excelente protección contra el desgaste, un excelente poder de limpieza y un rendimiento general sobresaliente. El aceite de motor de gasolina SAE 5W-40 cumple con los requisitos de muchas de las especificaciones de la industria y OEM requeridas por los modernos motores de gasolina y diesel. El aceite de motor de gasolina SAE 5W-40 es perfecto para todo tipo de conducción y tiene el rendimiento para proteger cuando los aceites de motor convencionales a menudo no lo hacen. EVO E - Protección adicional para motor, embrague y engranajes V - Relación calidad-precio con un millaje extra del 70% O - Rendimiento excepcional en todos los tiempos SAE Grade:5W40 Viscosity, @ 100ºC, cSt (ASTM D445):13.7 Viscosity, @ 40ºC, cSt (ASTM D445):80

Base oil SN 600 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is generally used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : SN 600 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

HDDEO 10W-40 PLUS is a synthetic lubricant designed to provide a high level of protection for diesel and turbodiesel engines of modern commercial vehicles. It uses carefully selected unconventional bases, and additives of advanced high-performance technology. This allows to obtain a very high level of protection against engine wear, good fluidity at low temperatures, control of volatility and maintenance of viscosity at high temperatures. It is recommended for use in European industrial vehicles equipped with EURO IV and EURO V engines . HDDEO 10W-40 PLUS maintains its high performance characteristics for extended oil change intervals. Exceeds requirements: ACEA E6 / E7 / E9, API CI-4 / CF, MB 228.51, MAN M 3477, MTU Type 3.1, Renault VI RLD-3, Volvo VDS-4; DEUTZ DQC-IV-10 LA - SCANIA Low Ash, Mack EO-O Premium Plus Engines fueled by methane: MB 226.9 - MAN M3271-1