Produkty dla olej lukowy (16)

Jojobaöl wird aus den Samen der Pflanze Simmondsia Chinensis gewonnen, die in Arizona, Kalifornien und Nordmexiko beheimatet ist. Etwa 50 Gew.-% der Samen sind Öl. Die Jojoba-Pflanze ist ein männliches und weibliches Kraut. Um Samen zu erhalten, müssen Pflanzen beiderlei Geschlechts gleichzeitig in der Umwelt vorhanden sein. Die Jojoba-Pflanze wächst aus Samen und beginnt ab einem Alter von etwa 3 Jahren zu blühen. Es ist eine Pflanze, die unter geeigneten Bedingungen bis zu 200 Jahre alt werden kann. Seine Wurzeln reichen ziemlich tief und sind daher resistent gegen Trockenheit und Temperaturunterschiede. Es ist eine Pflanze, die wertvolle Mineralien aus der Tiefe des Bodens aufnimmt. Es ist also ein sehr haltbares Öl. Es verschlechtert sich nicht leicht und kann für eine lange Zeit verwendet werden. Bestellnummer :COS60084

Huile De Mais Modèle:Bidon En Plastique de 500 ML

Heat Transfer Oils are high-performance fluids specially designed for use in enclosed, indirect heating systems. They are meticulously crafted from exceptionally refined base stocks known for their resistance to thermal cracking and chemical oxidation. These oils boast efficient heat transfer capabilities and exhibit viscosities that allow for easy pumping, both during startup and while operating at temperature. Importantly, the flash point of these fluids remains stable throughout their service life, thanks to their resilience against thermal cracking at recommended operating temperatures. Heat Transfer Oils are exceptionally thermally stable, ensuring an extended service life without the formation of deposits or viscosity increase. They feature specific heat and thermal conductivity properties that enable rapid dissipation of heat. Available in:Bulk, 1000 Litres, 200 Litres and 20 Litres. Item Code:VI6-2872 (12), VI6-2876 (21), VI6-2877 (25), VI6-2873 (32), VI6-2880 (68), VI6-2874 (90)

Origine du produit Venezuela MEREY 16 HFO -Fioul 1,95 % HFO – Fioul 3 % FOB exclusivement Quantité à déterminer avec l'Acheteur

Organics Oil LLP 46 (+Certificate)

It is high quality oil that is formulated with qualified and adhesive additives and with highly refined base oils, and that enables movements of slide ways in machine tools operating under heavy loads to be proper and continuous.

Aral HighTronic 5W-40 is a high-performance, low-friction engine oil using Aral synthetic technology. It can be used in many cars with petrol or diesel engines (please note manufacturer specifications). The balanced formulation also meets the high wear protection requirements according to VW 505 01 (pump-nozzle specification). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C3 API SN/CF Meets Fiat 9.55535-S2 Meets Ford WSS-M2C917-A GMdexos2™ * MB approval 229.31/ 229.51 Porsche A40 Renault RN 0700 / RN 0710 VW 505 00/ 505 01 Container size:60 Product number:1508529

It is a high performance motor oil specially designed for maximum power generation of modern 4-stroke engines. It was developed to provide superior accumulation control and power protection under the most demanding operating conditions. Thanks to its excellent thermal and oxidation stability, it protects film strength at high temperature and reduces deposits especially in air-cooled engines. • It provides full-performance stable power by reducing friction losses with optimized friction control. • E ective lubrication at low ambient temperatures helps to start up easily and provides unique protection against wear. • Excellent viscosity stability softens the engine’s vibration and reduces noise. • Its special designed detergent dispersing feature provides e ective protection against rust and corrosion.

It is high performance, full synthetic gear oil that is developed to be used in synchromesh/non- synchromesh gearboxes and di erentials of passenger vehicles, heavy vehicles and earth movers requiring lubrication in the performance level of API GL-5. It provides excellent performance during four seasons because of its high viscosity index. While it makes shifting easier under very low temperatures, it also provides high lubrication and resistance again stoxidation under very high temperatures. It provides protection again stabrasion even under sudden load shocks due to it excessive pressure feature (EP), and extends its life, and minimizes maintenance costs.

It is high performance automatic transmission oil that is obtained with the combination of very well-refined high quality base oils and modern additives. It is automatic transmission oil that is developed specially to fulfil the requirements of leading engine manufacturers such as GM Dexron III E, Toyota T-IV and Ford Mercon. Furthermore, it can be used power-shift transmissions, steering and hydraulic units.

DCT Fluid is a specialized lubricant designed for dual clutch transmissions, commonly referred to as Direct Shift Gearbox (DSG) transmissions. Crafted from premium synthetic base oils, it incorporates a performance-oriented formulation that ensures seamless shifting, anti-shudder capabilities, and enhanced transmission responsiveness. These optimized frictional attributes not only lead to improved fuel efficiency but also offer robust protection for transmission components, minimizing wear and tear. Exceptional load-carrying capacity, anti-wear, and extreme pressure performance. Anti-shudder properties to prevent vibrations on the engine flywheel. Protection against corrosion and foam formation. High-temperature shear stability and oxidation resistance. Enhanced clutch friction and synchronizer durability. Maximum protection during high-stress operating conditions. Promotes improved fuel efficiency compared to traditional transmissions. Available in:Bulk, 20 Litres and 5 Litres Item code:VI3-2674

ARAL HighTronic M 5W-40 is a high-performance engine oil in Aral synthesis technology for demanding driving conditions in gasoline and diesel vehicles from the following vehicle manufacturers, among others: at Mercedes Benz for cars with gasoline and all diesel engines without particle filters, excellently suitable for most AMG and Brabus vehicles For petrol and diesel engines, including those from the VW Group Specifications ACEA A3/B4 API SP MB approval 229.3/ 229.5/ 226.5 VW 502 00/ 505 00 BMW Longlife-01 Porsche A40 Renault RN0700 / RN0710 Container size:208 Product number:1508526

Aral HighTronic J is a modern low-ash smooth-running engine oil in Aral Synth technology. Can be used for petrol and diesel engines (especially with diesel particulate filter DPF) where a product according to ACEA C2, API SN (or earlier) or Peugeot PSA Approval B71 2290 is required. The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C2 PSA Approval B71 2290 Container size:208 Product number:1508524

It is an extra high performance diesel engine oil that helps extend engine life in the most severe on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Exhaust Gas Recirculation (EGR) and Aftertreatment Systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalysts (DOC). It is a unique formulation combining the latest in diesel technology additive packages to provide superior antiwear, anti-corrosion, anti-oxidant protection and exceptional soot control. This unique blend incorporates synthetically fortified base oils to improve engine durability and oil stability at high temperatures.

Saw Oil is an aromatic oil with excellent lubricating properties for the lubrication of engines and chains of two-stroke sawmills used in woodcutting. It provides full protection of the parts by making good lubrication of the motors and chains of saws used in wood cutting. • It provides resistance against friction which reduces the power of the engine by controlling the wear and contamination. • Prevents the saw from heating, facilitates cutting.

Solcut QLB2 is a versatile solution suitable for a broad spectrum of applications. Whether you’re engaged in brass and aluminum machining within large transfer systems or tackling steel machining in smaller, single sump machines, Solcut QLB2 has you covered. This semi-synthetic biostable machining and grinding fluid forms transparent emulsions, which can become semi-translucent when used with hard water. Solcut QLB2 brings together the cleanliness and detergency typically associated with synthetic products while avoiding the sticky residues often encountered with such alternatives. It’s a reliable choice for various machining operations. Available in:200 Litres, 20 Litres Item code:VI6-2930