Produkty dla pompy nawadniające (10)

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Ø Sortie:1" Référence:000091

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Ø Output:1" Reference:000088

Utilisations : Agriculture, jardinage, industrie, usage domestique et autres usages. Données techniques : Fonctionnement automatique • Aspiration jusqu'à 9 m • Température maximale du fluide 40 ºC • Température ambiante maximale 40 ºC. Composition : Electropompe centrifuge modèle XJM 100 L • Raccord automatique • Autoclave à membrane EPDM certifié eau potable • Pressostat • Manomètre • Fiche 5 voies • Câble d'alimentation 2,5 m • Fiche mâle avec terre. Les ensembles de 40 L comprennent un tube en treillis d'acier flexible pliable. équitation:1 CV sur 5 Ø Sortie:1" Référence:477.1104095

Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Ø Output:1" Reference:000085

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. Ø Output:1 1/4" Reference:275.0001 Pumped liquid:clean water. Maximum liquid temperature:35ºC. Maximum sand content:60g/m3. Power cable:20m neoprene. Immersion depth:20 m. Maximum number of starts per hour:30 Power:1.3 Kw. Motor:8.4 A. Condenser:30uF. DNC:1 ¼". Head:37 to 85m. Maximum flow:4.5 m3/h.

Livré partiellement assemblé, autoclavé dans un emballage séparé Utilisations : Agriculture, jardinage, industrie, usage domestique et autres usages. Données techniques : Fonctionnement automatique • Aspiration jusqu'à 9 m • Température maximale du fluide 40 ºC • Température ambiante maximale 40 ºC. Composition : Pompe électrique centrifuge • Raccord automatique • Autoclave à membrane EPDM certifié eau potable • Pressostat • Manomètre • Fiche 3 voies • Câble d'alimentation 2,5 m • Fiche mâle avec terre. Les ensembles de 40 L comprennent un tube en treillis d'acier flexible pliable. équitation:1 CV sur 5 Ø Sortie:1" Référence:477.1104122

Agriculture Jardinage Industrie Usage domestique et à d'autres fins. Données techniques: opération automatique Aspiration jusqu'à 9 m Température maximale du fluide 40°C Température ambiante maximale 40ºC. Constitution: Pompe électrique centrifuge modèle XJM 100 L matériel automatique Autoclave avec membrane EPDM certifié pour l'eau potable Pressostat Manomètre enregistrer 5 façons Câble d'alimentation de 2,5 mètres Fiche mâle avec terre. équitation:1 a 5cv Ø Sortie:1" Référence:477.cjh999

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Ø Output:1" Reference:000091

Set de pression Termar QB60 25 M Inclus: pompe électrique Autoclave 25L Pressostat Manomètre Enregistrez 5 voies. Remarque : Les composants de ces ensembles sont fournis dans des emballages séparés. Ensemble de pression Termar avec autoclave de 25 volts:240 HP:0,5 large:2.6 Sortie:1" MCA:3-35 G/H:21h00-300 Référence:477.1104000

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. Ø Output:1 1/4" Reference:275.000097 Pumped liquid:clean water. Maximum liquid temperature:35ºC. Maximum sand content:60g/m3. Power cable:20m neoprene. Immersion depth:20 m. Maximum number of starts per hour:30 Power:0.6Kw. Motor:4.1 A. Condenser:16uF. DNC:1 ¼". Head:15 to 47m. Maximum flow:4.5 m3/h.