Produkty dla wykonawca (15)

Wire Belt introduces our line of PEEK drive components. PEEK is an abbreviation for PolyEtherEther-Ketone, a high performance engineering thermoplastic that can operate at high temperatures and is less abrasive on your stainless steel belts than metal drive components. PEEK can be used continuously to 250°C and in hot water or steam without permanent loss in physical properties. Our PEEK line is available for all drive components including: sprockets, blanks and end rollers. Tensile strength (N/mm²):100 Heat deflection temperature (ºC):152 Continuous service temperature in air (ºC, min-max):-50 - 240 Melting point (ºC):343

For industrial production and process technology The micro annular gear pump mzr-11508 is equipped with tungsten carbide rotors and bearings. Hard construction material and precision manufacturing techniques guarantee excellent dosage precision, high service life and wear resistance for low volume dosage of non-lubricating liquids. Driven by a high-power DC-motor the pump has a compact design and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508 is suitable for continuous delivery and discrete dosage of low and high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Dynamic precision motor brushless DC-motor with encoder Compact... Flow rate:0.19 - 1,152 ml/min Smallest dosage volume:100µl Displacement volume:192µl Differential pressure range:0 – 100 bar Maximum inlet pressure:10 bar Liquid temperature range:-5 ... +60 °C (-20 ... +120 °C *) (+23 ... +140 °F (-4 ... +248 °F)) Viscosity range:0.3 - 150,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:3/8" NPT internal thread, lateral optional 3/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, alloy C276 (2.4819); static seals: FPM, optional: EPDM, FFPM Motor:Brushless DC-motor, IP 54, 42 V DC, max. 368 W Encoder:500 counts per turn, type HEDL 5640 Electrical connection:motor cable length 3 m, 6-pole plug for motor winding, 12-pole plug for encoder and hall sensors Dimensions (L x W x H):313 x 110 x 125 mm Weight:approx. 8,000 g Remarks:* with optional heat insulation or heating module, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-4605 covers the flow rate range 0.012-72 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-4605 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 143 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.012 - 72 ml/min (min. 10 µl/h *) Smallest dosage volume:2µl Displacement volume:12µl Differential pressure range:0 – 50 bar (725 psi) Maximum inlet pressure:5 bar (73 psi) Viscosity range:0.3 - 50,000 mPas Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Precision CV:< 1% (Coefficient of variation CV) Fluid connection:inlet 1/8" NPT internal thread, lateral Velocity range:1 - 6,000 rpm Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):143 x 45 x 65 mm Weight:approx. 800g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-2505 covers the flow rate range 0.0015 - 9 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2505 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.0015 - 9 ml/min (min. 10 µl/h *) Smallest dosage volume:0.25µl Displacement volume:1.5 µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 25,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor, 24 V DC, 44 W Controller:integrated 16-bit, microcontroller Interface:0-10 V, RS-232, 1 digital input/output Dimensions (L x W x H):140 x 45 x 65 mm Weight:approx. 780 g Remarks:*depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-6305 covers the flow rate range 0.024-144 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-6305 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable even for low viscosity liquids Compact dimensions length 156 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.024 - 144 ml/min Smallest dosage volume:15µl Displacement volume:24µl Differential pressure range:0 – 40 bar (580 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 25,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:1/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):156 x 50 x 69 mm Weight:approx. 1080g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-11507 is equipped with tungsten carbide rotors and bearings. Hard construction material and precision manufacturing techniques guarantee excellent dosage precision, high service life and wear resistance for low volume dosage of non-lubricating liquids. Driven by a high-power three-phase AC-motor the pump has a compact design and covers the flow range from 29 ml/min to 1152 ml/min. The mzr-11507 is suitable for continuous delivery and discrete dosage of low and high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel High-power motor AC-motor for use with external frequency... Flow rate:29 - 1,152 ml/min Displacement volume:192µl Differential pressure range:0 – 140 bar (2,030 psi) Maximum inlet pressure:10 bar (145 psi) Ambient temperature range:-20 ... +40 (-4 ... +104 °F)°C Liquid temperature range:-5 ... +60 °C (-20 ... +120 °C *) (+23 ... +140 °F (-4 ... +248 °F)) Viscosity range:0.3 – 150,000mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:150 - 6,000 rpm Fluid connection:3/8" NPT internal thread, lateral optional 3/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, alloy C276 (2.4819); static seals: FPM, optional: EPDM, FFPM Motor:AC-motor, IEC-Size 056, 4 poles, IP 55, rated voltage 240/400 V, rated frequency 100 Hz, 240 W Temperature protection:thermal contact (NC) Dimensions (L x W x H):303 x 110 x 171 mm Weight:approx. 9,300 g Remarks:* with optional heat insulation or heating module, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-2505 covers the flow rate range 0.0015 - 9 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2505 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.0015 - 9 ml/min (min. 10 µl/h *) Smallest dosage volume:0.25µl Displacement volume:1.5 µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 25,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor, 24 V DC, 44 W Controller:integrated 16-bit, microcontroller Interface:0-10 V, RS-232, 1 digital input/output Dimensions (L x W x H):140 x 45 x 65 mm Weight:approx. 780 g Remarks:*depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-4005 covers the flow rate range 0.006 - 36 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-4005 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 143 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.006 - 36 ml/min (min. 10 µl/h *) Smallest dosage volume:1µl Displacement volume:6µl Differential pressure range:0 – 50 bar (725 psi) Maximum inlet pressure:5 bar (73 psi), (10 bar (145 psi) *) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 25,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):143 x 45 x 65 mm Weight:approx. 800g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-2905 covers the flow rate range 0.003-18 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2905 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.003 - 18 ml/min (min. 10 µl/h *) Smallest dosage volume:0.5 µl Displacement volume:3 µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 50,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):140 x 45 x 65 mm Weight:approx. 780 g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-4605 covers the flow rate range 0.012-72 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-4605 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 143 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.012 - 72 ml/min (min. 10 µl/h *) Smallest dosage volume:2µl Displacement volume:12µl Differential pressure range:0 – 50 bar (725 psi) Maximum inlet pressure:5 bar (73 psi) Viscosity range:0.3 - 50,000 mPas Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Precision CV:< 1% (Coefficient of variation CV) Fluid connection:inlet 1/8" NPT internal thread, lateral Velocity range:1 - 6,000 rpm Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):143 x 45 x 65 mm Weight:approx. 800g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-7205 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7205 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable even for low viscosity liquids Compact dimensions length 156 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.048 - 288 ml/min Smallest dosage volume:30µl Displacement volume:48µl Differential pressure range:0 – 40 bar (580 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 – 50,000 (1,000,000 *)mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:1/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor, 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):156 x 50 x 69 mm Weight:approx. 1080g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-11508X1 is equipped with tungsten carbide rotors and bear-ings. Hard construction material and precision manufacturing techniques guarantee excellent dosage precision, high service life and wear resistance for low volume dosage of non-lubricating liquids. Driven by a high-power DC-motor the pump has a compact design and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508X1 is suitable for continuous delivery and discrete dosage of high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Dynamic precision motor brushless DC-motor with encoder Compact dimensions length... Flow rate:0.19 - 1,152 ml/min Smallest dosage volume:100µl Displacement volume:192µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:10 bar (145 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) (+23 ... +140 °F (-4 ... +302 °F)) Viscosity range:0.3 – 50,000 (100,000 *)mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:3/8" NPT internal thread, lateral; optional 3/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, alloy C276 (2.4819); static seals: FPM, optional: EPDM, FFPM Motor:brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm Positioning:1000 counts per turn, analog hall sensors Interface:motor cable length 2 m, 6-pole plug for motor winding, 12-pole plug for encoder and hall sensors Dimensions (L x W x H):265 x 100 x 109 mm Weight:approx. 4,500 g Remarks:* with optional heat insulation or heating module, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-2905 covers the flow rate range 0.003-18 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2905 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.003 - 18 ml/min (min. 10 µl/h *) Smallest dosage volume:0.5 µl Displacement volume:3 µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 50,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):140 x 45 x 65 mm Weight:approx. 780 g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-7208X1 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures. Driven by a high-power DC-servomotor the pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7208X1 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1% at low volumes High differential pressures achievable even for low viscosity liquids Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Compact dimensions length 211 mm Dynamic... Flow rate:0.048 - 288 ml/min Smallest dosage volume:30µl Displacement volume:48µl Differential pressure range:0 – 120 bar (1,740 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 – 1,000,000mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:1/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, 316L; static seals: FPM, optional: EPDM, FFPM Motor:brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm Encoder:1000 counts per turn, analog hall sensors Dimensions (L x W x H):211 x 84 x 93 mm Weight:approx. 2,100g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-7208 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures. Driven by a high-power DC-servomotor the pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7208 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1% at low volumes High differential pressures achievable even for low viscosity liquids Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Compact dimensions length 211 mm Dynamic... Flow rate:0.048 - 288 ml/min Smallest dosage volume:30µl Displacement volume:48µl Differential pressure range:0 – 150 bar (2,175 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 – 1,000,000mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:1/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM Motor:brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm Encoder:500 counts per turn, type HEDL 5640 Dimensions (L x W x H):211 x 84 x 93 mm Weight:approx. 2100g Remarks:* depending on accessories, Customized solutions on request.