Produkty dla z kołnierzem (436)

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers. Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever. The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life. The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required. Due to the modular construction many special designs are available. Reference:06611-10

Steel parts electro zinc-plated. Hinge pins tempered. Plastic handle oil-resistant. Note: See 05200 – 05280 for accessories. Reference:05020 Material:Steel plate DD11 1.0332

The toggle clamp adjusts automatically to the height of the workpiece. Infinitely adjustable clamping height within 35 mm with approximately constant clamping force without manual adjustment of thrust screw position. The clamping force can be adjusted up to 2.500 N according to requirements using a set screw under the lever in the hinge. The hole pattern in the baseplate is suitable for millimetres and inches. Reference:05300

Handle powder-coated, fine-textured structure. Steel parts black oxidised. Note: Standard colours are: black or ruby red RAL 3003. Reference:06442

Body and clamping pin oxidised. Contact faces hardened and ground. Note: The UNI lock 5-axis add-on modules are used for raising basic modules and mounting base. Depending on the clamping situation, optimum assembly height can be achieved using a combination of the basic module and add-on module. Reference:42203

We supply different styles plastic buckle for garments and package use, such as belt fastening buckle, webbing buckle, dog collar buckle etc. The plastic buckle size and color can be customized according to customer’s requirement. Specifications: Name Plastic Buckle MaterialPlastic, PA, PC, ABS, POM, PP, PVC, TPU Styles Various SizeVarious PackingStandard Packing MOQ5000 pcs mixing size FeaturesLow temperature resistant, high temperature resistant, strong tension Color Standard Color or As Customized ApplicationBags, luggage, garments, dog collar, transportation fastening etc. CertificateISO9001 Model:PLBK029 MOQ:5000 PCS Delivery Time:10 DAYS

We supply different styles plastic buckle for garments and package use, such as belt fastening buckle, webbing buckle, dog collar buckle etc. The plastic buckle size and color can be customized according to customer’s requirement. Specifications: Name Plastic Buckle MaterialPlastic, PA, PC, ABS, POM, PP, PVC, TPU Styles Various SizeVarious PackingStandard Packing MOQ5000 pcs mixing size FeaturesLow temperature resistant, high temperature resistant, strong tension Color Standard Color or As Customized ApplicationBags, luggage, garments, dog collar, transportation fastening etc. CertificateISO9001 Model:PLBK053 MOQ:5000 PCS Delivery Time:10 DAYS

Pneumatic clamps have the following advantages compared to hand clamps: The operator is relieved of frequent clamping. Several clamps can be activated at the same time and can be closed in a specific sequence. Single or multiple clamps can be activated from varying positions by machine control or hand control. Because of the toggle system: the clamp remains closed if the air supply fails. the air consumption is low due to the large end ratio. pivoting the clamping arm achieves a large opening travel. optimum force and movement ratios are achieved. VL = air consumption per complete cycle in dm³ at 6 bar. Selection criteria: To select the correct size of pneumatic clamps, the possible clamping force at 6 bar (any compressed media are permissible, maximum pressure 10 bar) is specified besides the retaining force. F3 is the possible clamping force that the clamp exerts on the end of the clamping arm, F4 the force it exerts on the fulcrum side. Reference:05331

75% Acryl 24% Polyester 1% ELASTAN

NC vices can be used for a wide range of clamping tasks: Repeat accuracy ≤0.01 mm Fixed jaw locked in all directions (X,Y,Z) Vertical use directly on the machine table Wide clamping range by using attachment step jaws Can be laid on the side, with fastening holes for slot spacing of 63 mm and 100 mm Quick pre-adjustment of the clamping range using locking pins Basic equipment includes two reversible screw-on jaws and one crank handle Reference:41091 Material:Body and jaw holder mild steel Version:Hardened and ground all sides

We supply different styles plastic buckle for garments and package use, such as belt fastening buckle, webbing buckle, dog collar buckle etc. The plastic buckle size and color can be customized according to customer’s requirement. Specifications: Name Plastic Buckle MaterialPlastic, PA, PC, ABS, POM, PP, PVC, TPU Styles Various SizeVarious PackingStandard Packing MOQ5000 pcs mixing size FeaturesLow temperature resistant, high temperature resistant, strong tension Color Standard Color or As Customized ApplicationBags, luggage, garments, dog collar, transportation fastening etc. CertificateISO9001 Model:PLBK027 MOQ:5000 PCS Delivery Time:10 DAYS

We supply different styles plastic buckle for garments and package use, such as belt fastening buckle, webbing buckle, dog collar buckle etc. The plastic buckle size and color can be customized according to customer’s requirement. Specifications: Name Plastic Buckle MaterialPlastic, PA, PC, ABS, POM, PP, PVC, TPU Styles Various SizeVarious PackingStandard Packing MOQ5000 pcs mixing size FeaturesLow temperature resistant, high temperature resistant, strong tension Color Standard Color or As Customized ApplicationBags, luggage, garments, dog collar, transportation fastening etc. CertificateISO9001 Model:PLBK021 MOQ:5000 PCS Delivery Time:10 DAYS

Hook clamps and clamping screw carbon steel, tempered. Reference:04374 Version:Black oxidised

We supply different styles plastic buckle for garments and package use, such as belt fastening buckle, webbing buckle, dog collar buckle etc. The plastic buckle size and color can be customized according to customer’s requirement. Specifications: Name Plastic Buckle MaterialPlastic, PA, PC, ABS, POM, PP, PVC, TPU Styles Various SizeVarious PackingStandard Packing MOQ5000 pcs mixing size FeaturesLow temperature resistant, high temperature resistant, strong tension Color Standard Color or As Customized ApplicationBags, luggage, garments, dog collar, transportation fastening etc. CertificateISO9001 Model:PLBK015 MOQ:5000 PCS Delivery Time:10 DAYS

Flange plate, piston and body rust-resistant, bright. Screws electro zinc-plated. Collet red or clear anodised. Note: Machinable collet system with base plate for mounting on 50mm pitch grid plates. The flange plate can be used for external or internal clamping collets. The contour of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours can be clamped. The integrated spring package generates a clamping force of 5.8 kN. The clamping force can be raised to 43.5 kN by pneumatic post-clamping. The clamp is released by blowing compressed air onto the lower piston surface pushing the piston upwards and releasing the clamping force on the collet. Clamping travel 0.2 mm. Repeat accuracy < 0.01 mm. Accessory: Collet for external or internal clamping 03179 Reference:03178

Chain clamps are used mainly in machine and plant construction. Chain clamps enable cylindrical, complicated and large to very large workpieces to be clamped securely and effectively in the quickest and easiest way. Suitable for cylindrical workpieces, valve bodies, pistons etc. The workpiece surface can be protected by attaching the plastic elements. Application: The knurled nut on the clamping bracket can be used to preset the chain length and the clamping force. The required torque is set on the clamping hook. Accessory: Steel roller chains for chain clamp sets 04211-03. Steel turnbuckles for chain clamp sets 04211-06. Steel prisms for chain clamp sets 04211-09. Nuts for T-slots DIN 508 enhanced, 07060. Cap screws DIN EN ISO 4762, 07160. Note: The opening angle of the chain should not exceed 30°. Do not exceed max. permitted tightening torques. Supplied with Chain clamp set 04211-15: Clamping hook. Clamping bracket. Reference:04211

Tightening the ball-end thrust screw moves the jaw plates forwards. The workpiece is pushed against the fixed stop and simultaneously forced down onto the seating face. The seating face for the workpiece can be mounted directly on the machine table. Reference:04460 Material:Steel Version:Case-hardened and black oxidised

We supply different styles plastic buckle for garments and package use, such as belt fastening buckle, webbing buckle, dog collar buckle etc. The plastic buckle size and color can be customized according to customer’s requirement. Specifications: Name Plastic Buckle MaterialPlastic, PA, PC, ABS, POM, PP, PVC, TPU Styles Various SizeVarious PackingStandard Packing MOQ5000 pcs mixing size FeaturesLow temperature resistant, high temperature resistant, strong tension Color Standard Color or As Customized ApplicationBags, luggage, garments, dog collar, transportation fastening etc. CertificateISO9001 Model:PLBK048 MOQ:5000 PCS Delivery Time:10 DAYS

1% ELASTAN 24% Polyester 75% Acryl

Vis roulée, traitée par induction à 62 ±2 HRC et polie. Ecrou rectifié, voie de roulement traitée par induction à 62 ±2 HRC et poli. Vis à billes à profil gothique avec un pas de 5 mm ou 10 mm. Simple, pas à droite. Ecrou à collerette avec filetage à billes selon DIN 69051 partie 5. Fabriquée selon la classe de précision C7 (Tolérance ±50 µ / 300 mm). Sans précontrainte avec le jeu axial P0 (max. 0,08 mm). Nous fabriquons des vis à billes selon vos besoins sur la base d'un schéma détaillé. Longueur de fabrication maximale 5600 mm. D'autres classes de précision et de précontrainte disponibles (voir renseignements techniques). L'écrou à collerette ne doit pas être démonté de la vis sans la bague de montage pour éviter de perdre les billes. Référence:24055 Vis:acier 1.1213 Ecrou:acier 1.3505 Racleur:plastique Indication de dessin:M6 pour graisseur

100% Baumwolle

Interchangeable subplates are particularly suitable for quickly exchanging fixtures on zero point clamping plates. Ground on both sides, standard clamping pin gauge of 200 mm. Complete with clamping pins and handles. On request: Further gauges and special sizes. Reference:42755 Material:High-strength aluminium

Tempered and black oxidised. Note: The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces. Reference:04370 Version:Tempered and black oxidised

100% Acryl

It is recommended that the cam lever is in a vertical position when the collet is positioned in the bore. The function of the clamping system was tested in bores with tolerance H7. All values for retaining force are guide values and are given without safety factor. The suitability for the respective application must be checked by the user. Advantages: Two components can be joined together without tools. The components are perfectly centred in the clamped state. The compact design means that the mandrel collet with cam lever can even be used in blind holes. There are no specific dimensional requirements for the holes. Additionally, the surfaces and design do not need to have any specific properties. Functional principle: The clamping system is inserted in the hole in the open state. At the beginning of the locking process, the mandrel collet expands and clamps itself in the lower component. The integrated disc spring assembly creates a positive down force Reference:03157-15

The lateral clamping screw tightens the jaws and clamps the workpiece on the circumference. The simple and compact design allows 2 workpieces to be clamped. The clamping travel is max. 0.5 mm. The jaws must be pre-tensioned before machining the contour, the supplied clamping ring is used for this purpose. Reference:03163

We recommend using a lubricating paste to reduce wear to the adjustment screw. Risers are available to increase the height of the power clamp. Supplied with clamping element, support element, DIN 508 slot key and grade 12.9 bolt. Application: The height of the clamping arm can be infinitely adjusted using the adjustment screw and the workpiece can then be clamped. Advantages: Very high retaining forces of 22–49 kN. Low height. Simple element assembly. Enables very fast, simple clamping. Infinitely adjustable height and length. Use in 12-28 mm T-slots or M10, M12, M16, M20 grid systems. Thrust pad available in smooth and serrated versions. Reference:04629 Material:Carbon steel

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

This kit was born to satisfy the different needs of small tailors, boutiques, hotels and other activities which do not need large quantities of singolar products. All the items that belong to the kit are sufficient for the packaging of a standard shirt, such as: white shaped tissue paper cm 35x50; shaped paper collar interlays strip cm 3x45; PVC collar interlays strip cm 3,5x48 central shaped; PVC support for shirt collar mm 103x30; 4 plastic medium clips mm 39; 2 plastic crossed clips mm 10x37; 2 round plstic cufflink mm 12xh13 1 white hang tag string mm 17. For further information or other requests, please contact us at pirsafa@pirsafa.com Category:COLLAR INTERLAYS STRIPS Item code:KITCAMICIA Type of material:PVC Single weight:0.10 gr Package weight:0.90 Kg Type of packaging:Bag (5 pz)