Produkty dla z torebką (56)

Machine suitable for the closing of bags with height 200 to 700 mm and max weight. 10 kg. The system with two pairs of heating elements and belts PTFE allows the closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc .This particular welding system is strongly recommended in the presence of bags with high thickness and bellows side. The temperature is controlled by two electronic temperature controllers and the feed speed is adjustable. The distance between the solder and the edge of the bag is 30 mm. The welding head and the conveyor belt are independently adjustable in height through flyers. The machine is equipped with rotary solid ink marker and interchangeable characters (max. 20 characters with height 5 mm.). The system works with inked rollers for easy reading and comes complete with photocell to do the marking in the desired place. Sealing width:mm. 8-10 Max product weight:10 Kg Temperature set:0° - 250° Weldable material:PP –PE-Coupled

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees. Max. seal length:mm. 600 Seal width:mm. 3 Max thikness:mm. 0,25 Sealable materials:PE-PP- AL/PE Dimensions:mm. 320x500x270 h.

Electric sewing machine Mod. FPMP 73 (220 V or 12 V) for the closure of bags of each type of paper, jute, fabric and plasticized, low thickness pvc, etc such as bags of salt or coffee. The operation with reciprocating motion with "wear" arrangement allows a very efficient grip even on medium to high thicknesses. The FPMP 73 is also suitable for the sewing of nets, such as those for the collection of olives or antihail. The machine works with standard 220 volt electric cable. It's also available in 12V and can be equipped with external battery and backpack. Sewing speed:Up to 14/15 m/min. Stitch length:mm 8 Stitching capacity:up to a maximum thickness of 10/12 mm Usable stitch:polyester type LEN 203, in rolls 1500 m Type of stitch:chain stitch Cutter:automatic

Machine suitable for closing bags mm height. 200 mm. 320 and max weight. 5 kg. The welding system belt PTFE allows closing bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc.. The temperature is controlled by an electronic controller and thespeed is adjustable. The distance between the sealing and the edge of the bag is 10 mm. The sealing head is adjustable in height. The machine is equipped with a marker rotary heat and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy readingand comes complete with photocell to make a mark at the desired point. Max products weight:5 Kg Seal width :mm. 10 Seal temperature:0° - 300° Sealable materials:PP –PE-coupled

CJS 25 HI is an electronic dosing device with load cells for semi-automatic filling of bags with max weight 25 kg. Hopper capacity 300 l, bags weight 2-25 kg. The machine is suitable for the automatic dosage of granular products with a good flowability. The dispenser is mainly formed by a welded and painted tubular steel, stainless steel, loading hopper with pneumatic closing, fast discharge channel, slow discharge channel with vibrator to achieve the exact weight, weighing hopper installed on load cells, pneumatic device for locking the empty bag, PLC operator interface and user-friendly keyboard. The dispenser can be combined with a motorized conveyor for automatic loading of the product and to a free or motorized conveyor for unloading the full bag, it can also be combinated with an automatic packaging machine. All parts in contact with the product are made of stainless steel. Ideal for packaging of pellets, granulated foods, dried pasta (short), cereals, coffee, nuts, sugar, etc. Weighing range:2 - 25 Kg Weighing rate:8-10 / minute Tolerance:± 0,5% Weighing system:Load cells Compressed air supply:6 bar Hopper capacity:300 l

The pneumatic sealing machines QF 600/800 LS are widely used in chemical industries, food industries, animal feed, etc. for sealing bags in plastic material of every kind, even of high thickness with max width of 600/800 mm and weight max of 50 kg. The use of compressed air to the closing of the sealing bars allows to adjust the welding pressure and ensures a high and constant quality, the closure of the bars takes place through double button (dual control of security). The welding machines QF-600/800 LS are installed on a stand with wheels and comes complete with height-adjustable idle roller conveyor for handling bags weighing up to 50 kg. Seal length:mm 600/mm 800 Seal width:mm.10 Sealable materials:PE-PP- AL/PE

The manual table clipper FP HR PS II is a small, handy and versatile table clipper with lever operating. It’s ideal for closing bags and net sacks where the number of packaging is not very high and therefore does not justify the purchase of a pneumatic machine. All parties have an anti-rust treatment and are easy to clean. Use aluminum clips diameter 2 mm, internal width 6 mm and length 13 mm, bars of 50 pcs. The clipper FP HR PS II is also used to close bags of mozzarella or other products containing liquid as it makes an airtight seal. Storage capacity:N° 150 clips Packaging max. diameter:mm 6 Clipper dimensions:mm 415 x 162 x 765H

STURDY BIG BAG HOLDER Big Bag lifting beam with 2000 kg capacity suitable for lifting and handling the classic Big Bags 90x90x120 cm. The grip of the big bag is very safe and takes place by hooking it on the 4 corners. The lifting beam can be installed on the forks of a lift truck by placing it in the appropriate seats or it can be used with a crane or bridge crane. Load :2000 Kg Dimensions (LxPxH) :1070x1155x350h mm Forks seats :170x70 mm Distance between forks :650 mm

These machines are suitable to the closure in horizontal bags with maximum height mm. 300 and max weight. 5 kg. The welding system with belts PTFE allows the closure of bags made ​​of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is controlled by an electronic temperature controller and the feed speed is adjustable. The distance between the welding and the edge of the bag is 10 mm. The distance (width) between the welding head and the conveyor belt is adjustable and is also adjustable the height of the conveyor belt relative to the floor. The machine is equipped with rotary solid ink marker and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy handling and comes complete with photocell to make the marking at the desired point. Max weight of product:5 Kg Sealing width:mm. 10 Temperature set :0° - 300° Sealable materials:PP –PE-Coupled

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP). Number of sealing bars:2+2 front-rear Sealing width:mm 3x2 (two 3 mm parallel seals) Length of sealing bars:mm 820 Chamber dimensions:mm 910x800x225 Useful chamber dimensions:mm 820x650x180H pump:100 m³/h Working cycle:25- 30 seconds

TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open. Sealing bar length:600 mm Film reel max. width:600 mm Adjustable sealing time:0~2 sec

BIGBAG containers with mesh bottom with removable uprights. Suitable for containing 1000 liters BIGBAG with dimensions mm. 900x900x1000h and 1000 kg load. BIG BAG bags are normally used for the separate collection or containment of scraps of various types. The BIG BAG containers are available in the following models: FPB.15 container for 1 1000 L BIG BAG - painted FPB.15Z container for 1 1000 L BIG BAG - galvanized FPB.15VV container for 1 1000 L BIG BAG - painted with collection tank covered with galvanized grid Example model:FPB.15/FPB.15Z Dimensions (LxPxH) :mm. 1070x1070x1350h Suitable for :1 1000 liter BIG BAG Load :1000 Kg.

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding. Example model:ME 305 FDA Seal length:mm. 300 Seal width:mm. 5 Thermosealing materials:PE-PP-AL/PE Max. seal thickness:mm. 0,25

Impulse manual bag sealers machines FPS series are the simplest and most economical series of sealers machines. The model FPS-C is equipped with a cutter for trimming the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. This model is only available in sizes 300 and 400 mm. The sealers FPS/FPS-C are suited to a medium-low production and allow the closing of plastic bags without folding, with maximum thickness of 0.15 mm (0.30 mm total). The sealing is by impulse (the resistance heats for a few seconds) and can be adjusted by timer. The sealing cycle is generally 3 seconds and is indicated by an indicator light. These sealers has a sealing width of 2 mm. Example model:FPS 300 Sealing bar:mm. 300 Sealing width :mm. 2 Alimentation:220V

Special sealers ME 455/605 VAD with air suction system (max 80%) suitable for volume reduction and better preservation of products. The machine is equipped with a double sealing bar with a sealing width of 5 mm, an electric pedal drive and pneumatic cylinders, mobile nozzles for air intake, an adjustable timer for suction, sealing and cooling. The ME 4510/6010 VAG model with a ATM gas injection system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling. Max. seal length:mm. 450/mm. 600 Seal width:mm. 5 Sealable materials:PE-PP-AL/PE

Digital and semiautomatic bench sealer, with electric pedal and sealing bars at constant temperature, for closing polypropylene bags and laminated / laminated aluminum, paper, barrier materials, etc. The "hot bar" type sealing bars are equipped with resistance and electronic thermoregulator. Thanks to the new latest generation electronic control card, all controls, adjustments and alarms are more easily set. The digital control of temperature, time and pause interval, it is more precise and functional, thanks to the new control panel, and to the large 1-line by 16-character alphanumeric LCD display. Temperature adjustment 0-150 ° C, with alarm of ± 5 ° C with respect to the set temperature. The closing of the bars takes place by means of an oversized electromagnet which guarantees a high sealing pressure and allows the sealing of high thickness envelopes with or without side gussets. For a higher production it is sufficient to select the automatic cycle with timed closing. Seal bars length:mm. 300 Seal width :mm. 13 Temperature range:0°C÷150°C

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm). Model:ME 3010 FH Max. seal length:mm. 310 Seal width:mm. 10 Dimensions:mm 420x370x270 h Weight:Kg. 12

New packaging system that creates air cushions on the spot. Fast, cheap and sile - The cushioning machine AIR BAG FP 600 G is compact and silent and allows you to create air cushions for packaging. It is suitable for use in the food, pharmaceutical, farm and wine industries and wherever it is necessary to pack fragile products such as glass jars, bottles and fragile products. Speed:0-20 m/min Cushions width:mm. 200-400 Film thickness:20 micron Sealing temperature:90-150°C Absorption:450W

The electric sewing machines for bags series FPGK are reliable and economical. Recommended for production up to about 400 to 500 bags per day, can be easily handled and transported to various sewing locations. Simple and compact, are equipped with a structure in aluminum alloy and plastic of high quality and mechanical parts in steel. Staplers are suitable to close sacks made of jute, paper, fabric, plastic and network for sewing fabrics, nets for agriculture, cartons, etc. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles). The standard model comes with 220 Volt and is equipped with kits transformer 12V / 220V, backpack, batteries and chargers. The transformer 12 volt / 220 volt is oversized and equipped with all the safety measures necessary to the safe operation and long-lasting equipment. Safety devices include: battery alarm, battery low shutdown, overload and overheating. The backpack allows you to move comfortably. Example model:FPGK 2701 B Sewing speed:10 m/min Daily bags:400/500 Material thickness:up to 8 mm Sewing-border span:mm 55 Stitch lenght:mm 4-9 Transport:Reciprocating Point:chain

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

Suitable for all types of neutral or printed film (preferably with antistatic treatment) or tubular polyethylene with thickness from 0.06 mm to 0.13 mm or tubular polypropylene with from 0.03 mm to 0.05 mm thick, and cartene normal or high density. Furthermore, with the FP BAG EVO it is also possible to use expanded polyethylene (FOAM) in tubular reel with a maximum thickness of 1.5 mm. It can use reels with a width of 80-300 or 100-500 mm without disassembly of parts or changing settings. The packaging machine automatically perform the forming of the bag with the upper opening. The filling of the bag and the subsequent closing can be done manually by an operator who starts the cycle of the machine through a button, or automatically by means of feeders, manipulators, weighers. The reel change takes a maximum of thirty seconds. The machine cycle time for the preparation of a bag 200 mm long is about four seconds. Example model:FP BAG EVO 300.1 Film reel width:mm 80-300 Reel external diameter:max. mm 350 Reel maximum weight:kg 15 Bags lenght:mm 25-999 Production:10-20 pieces/minute (depending on the length) Usable film:tubular polyethylene thickness from 60 to 130 microns Usable film:expanded polyethylene with a maximum thickness of 1.5 mm Usable film:polypropylene and HDPE film with thickness from 30 to 50 microns

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal Model:MG 820 Max. seal length:mm. 820 Seal width:mm. 5 Power:900W Dimensions:cm. 96x20x27 Weight:Kg. 26

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420 Chamber height (tank + cover):mm70/130 Vacuum pump:20 m3/h Work cycle:about 30 sec Sealing bars:2 lateral

CF SERIES - CONSTANT TEMPERATURE HEAT SEALERS WITH PEDESTAL AND FOOT PEDAL ( for multi-layer bags) THE CF SERIES of constant heat sealers with pedestal and operated by foot pedal, are ideal for sealing bags made of compunds, multi-layer films, co-extruded films, OPP, heat-sealable cellophane. It is not suitable for polyethylene films. Being operated by foot pedal, the hands are free to feed the machine. The sealing jaws of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The temperature of the sealing jaws is adjustable according to the type and thickness of the material to be sealed, and is kept constant by a heat thermo-regulator. The maximum sealable thickness, that always varies according to the type of sealable material, is 0.25 mm. (50 mm. total). Also available in CFN version with timer and acoustic signal at the end of sealing. Example model:ME 300 CF seal length:mm. 300 Seal width :mm. 14 Height of sealing bars from the ground :mm. 800 Type of bars:Cross serrated Sealable material:PP-AL/PE Power supply:220Vv

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

BAG OPENER - BAGS OPENING DEVICE The Bag Opener is an opening device characterized by a regular and silent motorized fan and is designed to quickly pack and fill the bags. It consists of a stainless steel body suitable for contact with food and easy to clean. The bags with a hole for hooking are very easy to change and the constant air flow opens them easily one after the other. Fan with two-speed motor and on/off switch. Adjustable guides to facilitate filling. Attention: the collection of the bags takes place by tearing (naturally a small piece of bag will remain torn off). Airflow:550 l/min Power :50W Usable bag width :Max. 400 mm - Min. 160 mm Usable bag lenght :Max. 600 mm - Min. 200 mm Maximum recommended thickness :50 micron (0.05mm) Dimensions (mm) :400x675x150