Produkty dla zawór 6 pvc (18)

1/2″ 3/4″ 1″

Mix proof valves

Klebeanschluss- beidseitig gesichert! , Dichtung KLEBE/CR, O-Ring EPDM, Temperaturbeständig bis 60°

Schweißbaugruppe aus Umformteilen

Nos clapets à boules doivent être utilisés en cas de fluides chargés. Toutes les caractéristiques des clapets à boules IVALTEC sont disponibles sur notre fiche technique

Body material is from cast iron (GGG) and wedge is fully covered by NBR or EPDM. Spindle material is stainless steel. Valve is designed such a way that provide safe sealing. By turning the stem clockwise, with the elastic design of the sealing wedge gives absolute tightness with minimum torque. Application: AB soft sealing gate valves are used for closing and opening fluid flow. The Gate valves soft sealing can be used for fluids up to 70°C such as drinking water and untreated water and also compressed air per Certificate DVGW-G260 (Other media on request). Application fields are water supplies, dams, water treatment, pumping stations, pipe lines, industries, power plants, waste water and irrigation. Corrosion Protection: Completely coated with blue electrostatic powder coating with minimum 250 micron thickness. Size: DN 50 – 300 Pressure: PN 10 – 16 Flanges: DIN EN 1092 – 2 (DIN 2501) Face to face: DIN EN 558 – 1 series 14/15 (DIN 3202 – F4 & F5)

- Forgée - Moulée

Ausgussventil

Our high pressure valves of the JB- series are specially designed for the metered spraying of liquids with a high proportion of solids. The completely dead space free construction leads the medium directly past the valve seat. Deposits and blockages, as known from many spraying systems, are a foreign word to us at Jerko. Compact design with low maintenance - these are the valves of the JB series! Pneumatically actuated, the valves achieve the shortest response times. 15 million switching cycles without repair have been confirmed by a customer. The best valves for spraying systems - already in use thousands of times!

Das RMA-Regelventil Typ ACR mit elektrischem oder pneumatischem Antrieb.

Electromagnetically operated pinch valve PPV 7 (NO) with high flow rates and precise control. The 2/2-way NO pinch valve clamps tubes with a Diameter up to 7mm and depending on the used material (PVC / Silicone) up to 1.5mm wall thickness. It has a clamping force of 42N. Solenoid weight:1300 g Dimensions:84 x 53 x 146  Design:2/2 way  Mode of action:NO  Diameter hose:4 to 7 mm Nominal voltage:DC 24 V Duty cycle:100 % Power consumption:18 W Thermal class:B 130 °C  Clamping force:42 N Connection:Lead 20 cm 

For checking the gas detection and gas measuring devices. All gases can be connected in 12 liter aluminum pressurized gas cans.

Dekompressionsventil Artikelnummer: 30-0382 Gewinde: M10x1 Schliesskraft: 4 ± 0,5N Bauhöhe: 61mm Gehäuse-Werkstoff: Stahl verzinkt

High quality pp coupling fittings

Verbindung zwischen Halterung und Profil, passend für verschiedene PVC Profile, mit SARGO und ANGULA kombinierbar Anwendung: - Verbindung zwischen Halterung und Profil - Passend für verschiedene PVC Profile - Mit SARGO und ANGULA kombinierbar Produktmerkmale: - Hohe Passgenauigkeit - Optimaler Halt durch Einschlagen der Kralle ins Profil - Mitgelieferte Muttern sind nicht montiert - Nachträgliche Justierung der Höhe möglich BreitexDicke:BreitexDicke Längen:je Profile anpassbar Material:DX51D+Z275 Verpackung:im Karton zu 100 Stück, inkl. 200 Stk. Muttern

Dekompressionsventil Artikelnummer: 30-0377 Gewinde: M10x1 Schliesskraft: 6 ± 1N Bauhöhe: 45mm Gehäuse-Werkstoff: Stahl verzinkt

Electromagnetically operated pinch valve PPV 7 (NC) with high flow rates and precise control. The 2/2-way NC pinch valve clamps tubes with a Diameter up to 7mm and depending on the used material (PVC / Silicone) up to 1.5mm wall thickness. It has a clamping force of 42N. Solenoid weight:1300 g Dimensions:84 x 53 x 146  Design:2/2 way  Mode of action:NC  Diameter hose:4 to 7 mm Nominal voltage:DC 24 V Duty cycle:100 % Power consumption:18 W Thermal class:B 130 °C  Clamping force:42 N Connection:Lead 20 cm 

Verbindung zwischen Halterung und Profil, passend für verschiedene PVC- und Aluminium Profile, mit SARGO und ANGULO kombinierbar Anwendung: - Verbindung zwischen Halterung und Profil - Passend für verschiedene PVC- und Aluminium Profile - Mit SARGO und ANGULO kombinierbar Produktmerkmale: - Hohe Passgenauigkeit - Optimaler Halt durch Eindrehen der Kralle ins Profil - Mitgelieferte Muttern sind nicht montiert - Nachträgliche Justierung der Höhe möglich BreitexDicke:23x2,5 mm Längen: je Profil anpassbar Material:DX51D+Z275 Verpackung:im Karton zu 100 Stück, inkl. 200 Stk. Muttern