Produkty dla pigment (93)

Protech Road Line Fast-drying refractive synthetic paint with excellent coverage and resistance to atmospheric agents, specially designed for painting horizontal road signs. Based on acrylic resin, specific plasticizers loaded with Rutile Titanium Dioxide, synthetic pigments resistant to UV rays, lamellar and crystalline charges, glass microspheres with a high refractive index and a specific mixture of solvents to balance drying in depth and in surface, allows to communicate the safety rules according to the provisions of the highway code both in the urban and extra-urban areas for the center lines, side lines, zebra stripes, stop bands and pedestrian crossings etc. Protech Road Line is specific for road markings on flooring, including roads: asphalt, cementitious substrates, porphyry, etc. Remove all traces of dust. On a dry support, apply Protech Road Line according to the methods described in the instructions for use. Protech Road Line, depending on the equipment and application methods, must be diluted, generally 5%, with a specific synthetic thinner for traffic island paints. Avoid applications in the presence of surface condensation, ice and make sure there is no flaking paint. Stir the product thoroughly before use. Apply 1.30 kg of Protech Road Line per square metre of surface to be painted. Can 25 kg - Can 5 kg - Pallet: 33 x (Can 25 kg)

Sanafarbe I Natural, protective, decorative, breathable, pigmented, non-toxic putty coat, naturally mildewcide, based on hardened lime putty and botticino marble dust, for indoors and outdoors. Formulation prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. SANAFARBE putty coat has a high breathability, a remarkable mildewcide and antibacterial capacity. It has no solvents, thinners, harmful substances in general. Embodiment of putty coat finishing, protective and decorative, internal and external masonry building, in ecological building interventions and in the restoration of vintage buildings and monuments. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. Spread Sanafarbe I, into two coats: the first, by simple deposition, with steel trowel, the second for laying and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, in one of two conditions suggested: with dry trowel, for smooth surfaces, with moistened trowel, for antique-effect surfaces. SANAFARBE-I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours. Indicative consumption depending on the different particle sizes of Sanafarbe I available: 1 mm GRAIN: approximately 1.6 -1.8 kg/m²; 1.2 mm GRAIN: approximately 1.8 -2.0 kg/m²; 2 mm GRAIN: approximately 2.4 -2.8 kg/m²; 2.2 mm GRAIN: approximately 2.6 -3.0 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 5 kg - Pail 25 kg

Calciumcarbonate der Produktfamilie CALCILIT® sind Produkte aus hochweißem Marmorgestein von höchster chemischer Reinheit. Die präzise Partikelgrößenverteilung mit exakt definiertem mittleren Durchmesser bieten für nahezu alle Anwendungen in der Farb-, Lack- und Kunststoffindustrie durch vielfältige Korngrößenbereiche -von Standardfeinheiten bis hin zu feinstteiligen CALCILIT® Produktvarianten - eine große Fülle von Einsatzmöglichkeiten . Für die Guss- und Putzindustrie stehen CALCILIT® Granulate in Qualitäten mit einer mittleren Korngröße zur Verfügung, die eine extrem enge Korngrößenverteilung aufweisen.