Produkty dla punktowe (495)

This stainless steel anchorage point (Ø 16 mm) and base plate (290 x 200 mm) are designed for easy on-top installation. Simply insert the 4 special toggle bolts included in the package into pre-drilled holes in the trapezoidal sheeting. This device has been awarded national technical approval by the German Institute for Construction Technology ("DIBt"). National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 Trapezoidal sheeting (positive/negative), steel ≥ 0.5 mm (0.63 mm according to the "abZ" specifications) Warm roofs, distance between the bores: 180 to 250 mm Installation materials included Add a supporting tube for usage as an end or corner support in a lifeline system

This stainless steel anchorage point (Ø 16 mm) is attached laterally to a concrete surface. It is reinforced by screwing on the supporting tube supplied (Ø 42 mm) - making it ideal for usage as a stronge support in a lifeline system. Our standard package includes 2 anchor rods and an angular plate - all made of stainless steel material. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

This stainless steel anchorage point (Ø 16 mm) and matching base plate (220 x 220 mm) - certified by the German Institute for Construction Technology (DIBt) - can be easily installed on a suspended flat roof ceiling made of concrete. The 4 hollow slab expension dowels that come with the device ensure a reliable hold. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 For concrete hollow core slab ceilings ≥ C45/55 Web thickness: min. 25mm Installed using 4x V4A expansion dowels (included) Upgrade with a supporting tube for usage as an end or corner post in a lifeline system

Excellent Head Cutter 14 cm Cutting edge long 23.0mm, similar to a nail clipper, has a slightly curved cutting surface that resembles the shape of a toenail. Can also be used perfectly as a corner nipper. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort. Order number:2002 EAN:4250550300099

Simply install this stainless steel anchorage point - which includes a welded-on supporting tube (Ø 42 mm) - on a pitched roof surface. The flexible crossbar, which is screwed onto a wooden beam, allows you to adjust it according to the roof pitch. It is installed using the 4 stainless steel screws supplied and then sealed up using a standard antenna tile. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 60 mm x 120 mm Adjustable angle and crossbar position Installation materials included

Die Entdeckung Orderman Columbus ist Vollendung in Technik und Design: zuverlässig, leistungsstark und einfach zu bedienen.

Whether this device is left standing out in the open or integrated into your roof greenery, our ABS Weight OnTop Max anchorage device for flat roof surfaces has been approved for installation without penetrating your roof surface - simply by weighting it down (50 x 50 x 5 cm, concrete slabs not included). Please observe the installation instructions provided in the "abZ" (national technical approval: Z-14.9-824) For flat roof pitches ≤ 5° Weighted down using 40 concrete slabs (ca. 1.120 kg) | resulting roof load approx. 61 kg per m² If implemented as an end or corner post in a lifeline system, a special supporting tube needs to be used

Thanks to its robust aluminium clamps, this stainless steel anchorage point can be attached to a metal seam roof with special profiles (KlipTec, Snapfalz etc.) without needing to penetrate the roof surface. The device can be flexibly attached to two seams spaced 300-660 mm apart. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm Sheet thickness ≥ 0.75mm e.g. KlipTec, Snapfalz or similar Incl. installation set We also supply a protruding model for use in a lifeline system

This cross-shaped anchor for flat roofs is weighed down using concrete slabs (50 x 50 x 5cm, not included). The design is based on a high-quality stainless steel frame (150 x 150 cm) with aluminium crossbars and a central, stainless steel anchorage point for one individual (Ø 16 mm). EN 795:2012, E For flat roof pitches ≤ 5° Weighed down using 8 concrete slabs (ca. 224 kg) Weight incl. ballast: ca. 245 kg; resulting roof load approx. 108.9 kg per m² Also designed for usage as an intermediate post in a lifeline system Incl. 5 EPDM patches to protect your roof membrane

This anchorage point (Ø 16 mm) for sandwich sheeting is simply installed from above using 4 special toggle bolts. The anchorage eyelet, rod and base plate (372 x 200 mm) are all manufactured completely from stainless steel material. The special toggle bolts needed are included in the package. EN 795:2012, A + CEN/TS 16415:2013 Sandwich and trapezoidal sheeting (negative) For steel plating ≥ 0.5 mm Distance between the bores: 280 to 333 mm Installation materials included Add a supporting tube for usage as an end or corner post in a lifeline system

This low-cost, stainless steel roof hook has a cranked shaft - perfect for bridging the roof battens - and is secured in a few easy steps by simply screwing 2 stainless steel screws through the counter battens into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Simply screwed onto a wooden beam (min. 60 mm x 120 mm) Incl. installation materials (screw length: 160 mm length, Ø 8 mm)

This stainless steel anchor (M12 thread), which is screwed through a steel structure and countered on the other side, is equipped with an unobtrusive anchorage eyelet. It is designed to protect 1 individual from falling and is suitable for all directions of load (incl. axial). Our standard package also includes 1 counter nut. EN 795:2012, A Small and unobtrusive Designed for steel structures (countered) Installation materials included

You can move freely all around this centrally-installed stainless steel anchorage point. It is equipped with a rotating anchorage eyelet - making it suitable for wall, ground, facade and overhead installation. The 80 mm thread (M16) is firmly cemented into concrete using special adhesive. National technical approval ("abZ"): Z-14.9-688 (max. 2 individuals) (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 (max. 3 individuals) EN 50308:2004 (max. 2 individuals) Freely rotating eyelet Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250 Not suitable for recurrent abseiling usage when installed overhead!

This stainless steel anchorage point, which comes with a base plate (150 x 150 mm), has been approved by the German Institute for Construction Technology ("DIBt"). It is installed on a steel structure and countered on the other side. The welded-on supporting tube (Ø 42 mm) easily withstands the pre-tensioning stress to which it is subjected when used in a lifeline system. Our standard package includes a set of installation materials. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Incl.stainless steel installation set

Die Montage des ABS-Lock X-T-One mit einem einzigen Kippdübel schont die Dämmschicht auf dem Trapezblechdach. Montieren Sie diesen dachschonenden Edelstahl-Anschlagpunkt mit nur einem einzelnen Spezialkippdübel (im Lieferumfang) auf dem Trapezblech. Das Stützrohr (Ø 42 mm) dieses Sekuranten füllt die zur Montage erforderliche Öffnung in der Dämmschicht abschließend passgenau aus.