Produkty dla punktowe (44)

Macchina da caffè per capsule Espresso Point compatibili, per la casa e l’uffici - Macchina da caffè per capsule Espresso Point compatibili, per la casa e l’ufficio

Macchina Caffe' B.ca-fap-fastback 802 Point

La vanga a scudo penetra il suolo grazie alla punta, poi si allarga in modo da poter lavorare una fetta di terreno sufficientemente ampia ad ogni affondo. Si tratta del modello più diffuso ed è sicuramente valida sia in giardino che in terreni compatti. Con nervatura centrale di rinforzo. Peso: 1400gr Dimensioni: 24x29cm Diametro della canna: Ø38mm

Controllore adattivo da 7'' touch screen. Costruzione di tipo monoscocca. Costruzione interna ed esterna in acciaio inox AISI 304. Piedi in acciaio inox regolabili in altezza. Guarnizione porta resistente alle temperature minime di raggiungimento. Profili cella e profili porta resistenti alle temperature minime di raggiungimento. Vano tecnico posto sotto la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile. Quadro elettrico a connettori, estraibile e facilmente ispezionabile. Porta-teglie multilivello regolabile in acciaio inox AISI 304, adatto a contenere teglie GN 1/1 ed EN 60x40. Struttura facilmente removibile per operazioni di pulizia. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brina. Resa frigorifera (Evap. -10°C / Cond. 45°C):7626 W Condensazione:autonomo aria Gas refrigerante:R452A GWP:2141 Classe climatica:4 Alimentazione (Ph / Volts / Hz):380-420/3N/50 Max assorbimento elettrico cicli freddo:4881 W - 10.28 A Capacità abbattimento (+90°C/+3 °C):68 kg Capacità surgelazione (+90°C/-18 °C):52 kg Dimensioni interne (lxpxh):650 x 433 x 1210 mm

Cazzuola a punta tonda Lama in acciaio Manico in bicomponente

Lettere e numeri e scritte con ricami in rilievo e con fili speciali in spugna sopra ad un fondo di tessuto pannolenci, che rimane esterno per essere cucito su capi. Campione realizzabile (causa costo elevato si consiglia confermare da layout). Come applicarli cordoncino di 2/3mm ricamato sul perimetro mediante macchina da ricamo. Oppure tramite semplice cucitura. Quantità minima:250 pz Listino disponibile:a preventivo

Regrindable pointed chisel in chrome vanadium steel. Special hardening on the tip that allows it to be re-sharpened without further treatments. Structural strength increased by the ribs. Round section 16mm. Size:250mm / 300mm / 350mm / 400mm

Reference Standards for Verifying Instrument Accuracy Reference standards are substances that enable precise temperature calibration and adjustment of melting point and drop point instruments. Each high-purity calibration substance from METTLER TOLEDO is supplied with temperature values traceable to primary standards. Calibration substances are provided for the entire temperature range to ensure reliable drop and softening point measurements.

The glue dosing system is a simple and reliable system that allows the application of a certain amount of glue on boxes, cartons, trays, etc. The expulsion of the glue is controlled by an electro-pneumatic valve, controlled by the operator with a pedal or button. The amount of glue to be dispensed can be easily adjusted using a timer. Thanks to the valve that discharges the excess air, it is also possible to apply just one glue point without risking leaking from the gluing machine. The gluing machines are supplied with about 3 meters of compressed air hose. The length of the tube can be changed during the order. Available models: FPTR 50.5 LCD electro-pneumatic gluing machine with adjustable temperature with thermostat from 20 to 200°C LCD display FPTR 55 LCD electro-pneumatic gluing machine with electronically adjustable temperature from 50 to 210°C LCD display FPTR 55 LCD HT electro-pneumatic gluing machine with electronically adjustable temperature from 50 to 250°C LCD display Example model:FPTR 50.5 LCD Air pressure:adjustable 1-6 bar Air consumption:100 l/min Temperature adjustable :20°-200°C Heating time:3-5 min Tank capacity:250 ml Extrusion capacity:250 ml/min

AUTOMATIC CASE ERECTORS Semi-automatic carton erector for closing the bottom flaps of the box Max. sixe mm. 520x520x700 or mm 670x670x800. The Pack Point is a case erector that, assisted by an operator, automatically folds the four bottom flaps of an American box. In few seconds the carton is ready for the operator to fill: while holding the case, Pack Point allows the operator to use both hands for placing the product into the carton. When the carton is filled, the operator presses a button and the PP automatically transfers the carton into a case sealer for top and bottom sealing. The Pack Point can be linked to a Gem 520/670 (bottom taper) so that boxes can be easily sent to filling lines by motorized conveyors. The machine is equipped with 4 wheels with brakes. Example model:PACKPOINT 520 Box size:Length from 150 to 700 mm Width from 110 to 520 mm Height from 120 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:4 bar Air consumption:13 nl/min Work surface height:650 mm

Manual stapler particularly robust, suitable for the top closure of cardboard boxes. Available in 3 models for staples with width mm. 35 and depth mm. 15-19-22 and is provided with a device for adjusting the depth of stitching. Charger capacity:100 staples Usable staples:35/15 - 35/19 – 35/22 (to be specified at time of order) Weight:Kg. 2,5

Manual stapler light and handy for closing cardboard boxes with points made of metal, provided with a device for adjusting the depth of stitching. It uses staples in finger width mm. 35 and length mm. 15/19/22. Staples width:standard 35 mm (on request 32 mm) Magazine capacity:100 staples Usable staples:35/15-35/19-35/22 and 32/15-32/19 (depending on model)

PACK POINT 08 - CASE ERECTOR Semiautomatic carton erector. It forms the bottom of uniform size batches of American type boxes, with operator. Operation is simple , just insert the open box in the case erector. The four bottom flaps are folded and the box is automatically locked in position for filling. A pneumatic pusher makes the expulsion of the box to a taping machine . The PACK POINT 08 when combined with a taping machine is a compact and productive semi-automatic packaging line. The machine is equipped with 4 wheels with brakes. Box Size:Length from 180 to 650 mm Box Size:Width from 140 to 520 mm Box Size:Height from 100 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:5 bar Consumption per cycle:7,5 nl Work surface height:650 mm

The wire pointing machines Mod. AT are utilized for executing the pointing operation on the wire, by rolling, before its introduction into the drawing die. Tecno Impianti designs and manufacture 9 models of wire pointing machines, which cover a range of wire diameters from 1,0 to 20,0 mm. Machines from Mod. AT/3 up to Mod. AT/10 are equipped with two horizontal rolling cylinders. The models AT/16 and AT/20 have two horizontal and two vertical rolling cylinders. The wire pointing machine Mod. AT/14 can be supplied either with two rolling cylinders and with four.All the models can be supplied installed on a movable carriage or on a fixed base.