Produkty dla instrumenty (3700)

Inkrementaler Messtaster mit magnetischem Funktionsprinzip. Extrem unempfindlich gegenüber Verschmutzungen wie Ölnebel, Feuchtigkeit und Staub. Perfekt geeignet zur automatisierten Messwerterfassung in Messvorrichtungen, Montage und Fertigungsanlagen. Messbereich:12mm Genauigkeit:6µm (p-p) / 10µm(p-p) Auflösung:1µm / 5 µm Max. Ansprechgeschindigkeit :100m/min Referenzmarke:keine Messbolzenbetätigung:Feder / Pneumatisch mit Adapter DZ176 (optional) Ausgangsignal:TTL-Linedriver (RS422) mit Interpolator MT14 (optional)) Kompatible Messwertanzeige :LT10 / LT11 Serie

Surgical gown cuffs

The very high irradiances of up to 39,000 mW/cm² and the compact dimensions characterize the UV-LED Spots and allow extremely short process times. For this purpose, the UV-LED is focused at the desired working distance. The UV-LED Spot P is suitable for automated and manual bonding. For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395, 405 and 450 nm are available. With the variety of wavelengths as well as the exchangeable optics, you remain particularly flexible and can upgrade and change over at any time. For controlling the UV-LED Spot P, we offer the LedControl S as a table top device or the LedControl DC for DIN rail mounting. With the LedControl S and DC UV LED controllers, the ultraviolet LED output can be set between 2% and 100%. Wavelength:365, 385, 395, 405 o. 450 nm Dimensions, Spot P:Ø 15 x 143 mm Dimensions, Spot P short:Ø 15 x 60 mm Cable length:1,5 m Weight:~130 g

Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection waterproof (IP67) contactless integral torque amplifier single supply voltage wide range of application small form low moment of inertia speed measurement (option) angle measurement (option) DRWPL series torque transducers are fitted with a number of gaskets in compliance with international protection IP67. The devices are also available with optional speed or angle detection for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V. Supply voltage:12V DC ± 10 % Power consumption:approx. 200 mA

The Cairsens© CO sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:CO Measuring Range (ppm):0 – 20 Certified Detection Limit (ppm):0.05 Resolution (ppm):0.001 Operating Temperature (°C):-20 to +50

CNC Machining at RPWORLD meet the diverse needs of clients ranging from single part to low- to mid-volume production. Our CNC machines run 24/7, ensuring that your high precision, complex geometries parts delivered in as fast as 3 days. We have equipped with 3-axis, 4-axis, and 5-axis machines, drilling machines, lathe machines and EDM, which are designed for creating complex shapes with high precision. The cutting-edge machines offer tight tolerances DIN ISO 2768 medium (fine), and wide machining range from 1mm to 1600mm. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design Industries Applied:Medical Device Industries Applied:Scientific Instrument

Laboratory beakers based on DIN EN ISO 3819 (glass, formerly DIN 12331), versatile. When bought in bulk, individual print is possible. Material:PP, highly transparent

Der Druckmessumformer DMP 343 wurde zur Messung sehr kleiner Überdrücke sowie für Vakuumapplikationen konzipiert. Als Messmedien eignen sich nichtaggressive, trockene Gase sowie dünnflüssige, nichtaggressive Öle. Der DMP 343 zeichnet sich durch exzellentes Temperaturverhalten sowie hervorragende Langzeitstabilität aus. Eine breite Palette von normierten Ausgangssignalen, elektrischen und mechanischen Anschlussvarianten decken nahezu alle in der Praxis vorkommenden Applikationen ab. Merkmale: — Nenndrücke: 0 ... 10 mbar bis 0 ... 1000 mbar — Genauigkeit: 0,35 % — geringer Temperaturfehler — sehr gute Langzeitstabilität — sehr gute Linearität Optionale Merkmale: — Ex-Ausführung Ex ia = eigensicher für Gase und Stäube — verschiedene elektrische und mechanische Anschlüsse — kundenspezifische Ausführungen

The capacitive pressure transmitters of the 41X series are designed for measuring relative pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output. Pressure Ranges:0…1 to 0…200 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:I2C Temperature Range:-40…110 °C Dimensions:⌀ 19 mm x 5 mm

Der Typ 9180 unterstützt Kraft-, Druck- oder Drehmomentsensoren auf DMS-Basis sowie den Anschluss von Weg- oder Winkel-Sensoren in potentiometrischer oder DC/DC-Ausführung. Weiterhin können Prozesssignale ± 1 V/ 5 V/ 10 V bzw. 0 ...1 mA, 0(4) ... 20 mA gemessen werden. Auf dem 14 mm hohen LED-Hauptdisplay kann der aktuelle Messwert, auf einem zweiten Display direkt unter der Hauptanzeige der Spitzenwert abgelesen werden. Durch den geringen Messfehler von 0,1 % wird der Anzeiger vor allem höheren Genauigkeitsanforderungen gerecht. Optional ist es möglich, bis zu 4 Grenzwerte zu überwachen und das Ergebnis über Relais oder Transistorausgänge an die Steuerung zu liefern. Damit ist der Prozesswertanzeiger für Klassierungs-, aber auch für Steuerungs- und Regelungsaufgaben einsetzbar. Bei Aktivierung eines externen HOLDSignales wird der Messwert in der Anzeige festgehalten. Nützlich ist die TARA-Funktion z. B. zum Wegtarieren von Vorlasten. Messgenauigkeit:0,1 % v.E. Messrate:16/s Sensortyp:DMS / Potentiometer / Normsignale / DC/DC /Transmitter Schnittstellen:RS232, RS485, BCD Anzeige:± 999 999 Sensorspeisung DMS::10 V / 120 mA 5 V /120 mA Sensorspeisung Potentiometer::10 V/120 mA - 5 V /120 mA Sensorspeisung Normsignale:DC/DC und Transmitter: ± 1 V / ± 10 V Schutzart:IP65 Versorgungsspannung:115/230 VAC, 50/60 Hz - 24/48 VAC, 50/60 Hz Messkanäle:16

Ideal para la instalación en básculas de plataforma y la integración en máquinas: con la célula de carga de un único apoyo CB17, usted confía en la calidad probada de un fabricante líder en tecnología de pesaje industrial. Adecuado para rangos de carga de 600 g a 3 kg y un tamaño de plataforma de hasta 200 mm × 200 mm.

Knight Optical can offer Biconvex Lenses for use within Optical Systems. We supply a range of Biconvex lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Biconvex lenses are simple lenses with a two convex surfaces, usually of the same radius and have a broad range of applications including, but not limited to, focussing and control of laser beams, moderate quality imaging and other optical instruments. Read PDF for more information…. Material::N-BK7 or equivalent, UV Fused Silica, SF11 or equivalent Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface Quality: :< 40-20 Scratch/Dig Surface Figure::< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required)

Nonrotating torque meters designed to be placed between ratchet and wrench. Easy to install (standardised wrenches) o Compact design Reference:6305 Protection class:IP54 Material:alloy steel Cable length:3 m (other lengths available on request) Combined error (non-linearity + hysteresis) (% F.S.*):<± 0.25 Repeatability error (% F.S.*):<± 0.1 Creep error over 30 min. (% F.S.*):<± 0.1 Zero shift after loading (% F.S.*):<± 0.025 Reference temperature (°C):23 Compensated temperature range (°C):-10...+45 Service temperature range (°C):-25...+70 Storage temperature range (°C):-50...+85 Temperature coefficient of the sensitivity (% F.S.*/10°C):<± 0.05 Temperature coefficient of zero signal (% F.S.*/10°C):<± 0.035 Nominal sensitivity (mV/V):1.5 Input resistance (ohm(s)):350 ± 2 Output resistance (ohm(s)):350 ± 2 Insulation resistance (50 V) (Mohm(s)):> 5000 Reference excitation voltage (VDC):10 Permissible nominal range of excitation voltage (VDC):3...12 Safe load limit (% F.S.*):120 Breaking load (% F.S.*):> 300 Permissible dynamic loading (% F.S.*):40 Zero balance (mV/V):± 0.02 Sensitivity tolerance (%):<± 0.3 Static lateral force limit (% F.S.*):10

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The DSS1064-3000 laser delivers 2.5 mJ pulse energy at a repetition rate of 20 Hz and a pulse width of 2.5 ns, i.e. a pulse peak power of 1 MW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use. Wavelength:1064 nm Pulse energy:2500 µJ Peakpower:1000 kW Pulse Width:2.5 ns Average Power:50 mW Repetition Rate:single shot ... 80 Hz Beam diameter:0.6 mm Spatial Mode:TEM00 Application:Ablation, laser-induced breakdown spectroscopy, photoacoustics

Die Wirbelstrombremsen der WB-Reihe sind vielseitig einsetzbar und hervorragend geeignet für Prüfaufgaben bei hohen Drehzahlen in mittleren bis hohen Leistungsbereichen. Das Bremsmoment einer Wirbelstrombremse ist drehzahlproportional und erreicht seinen Maximalwert bei der Nenndrehzahl der Bremse. Der kleine Rotordurchmesser der Bremse garantiert ein niedriges Trägheitsmoment. Die Bremse wird wassergekühlt, wobei das Wasser durch den Stator geleitet wird. Dank dieser Kühlung eignen sich die WB-Bremsen für hohe Dauerbelastungen (max. 140 kW). Wirbelstrombremsen der WB Reihe verfügen über eine Genauigkeit von ± 0.3 % bis ± 0.5 % vom Skalenendwert, abhängig vom Typ und dessen Konfiguration. 13 Standardmodelle mit Maximaldrehmomenten:300mN·m ... 560N·m Bremsleistung:500W ... 140kW Betriebsrichtung:CW / CCW

Imagerie infrarouge et profils thermiques pour applications industrielles - Le scanner en ligne Raytek MP150 permet de mesurer en continu la température de procédés défilants et de la visualiser sous forme de thermogrammes et de profils thermiques ; dans le cadre de l’asservissement de procédés et de la surveillance qualité. — Thermogrammes en temps réel et en couleurs — Vitesse de scrutation de 150 lignes par seconde — Jusqu’à 1024 points de mesure sur une même ligne — Optique de 200:1 pour les modèles 1M et 2M — Laser linéaire intégré — Ethernet TCP/IP communication — Moteur sans balais d‘une durée de vie moyenne de 40.000 h — Soufflage d‘air à l‘avant et refroidissement à eau Le logiciel DataTemp DP permet de subdiviser les thermogrammes enregistrés par le scanner MP150 en secteurs ou en zones. Les températures de ces zones peuvent ensuite être analysées à l’aide d’un grand nombre de fonctions mathématiques intégrées dans le logiciel (Max., Min., Moyenne, ...). En cas de dépassement des valeurs, le logiciel émet une alarme. Domaine spectral:1 µm...5 µm (selon modèle) Etendue de mesure:20 °C...1200 °C (selon modèle) (avec option à 3000°C sur demande) Vitesse de scrutation:Jusqu’à 150 lignes par seconde Points de mesure sur une même ligne:Jusqu’à 1024 Résolution optique:Jusqu’à 200:1 Interface:Ethernet TCP/IP (100 Mbit/s), OPC, DDE, module de sortie analogique/ numérique, RS485 Classe de protection:IP65 (NEMA4) Température ambiante:Jusqu’à 180 °C Champ de visée:90° Alimentation:24 VDC ± 25 %, 1 A

The PD200 is a professional impulse current measuring system to detect leak (holes) in non-conductive sealing systems and is suitable for leak detection on balconie, pond liners/swimming pools or flat roofs. In contrast to the previous model PD100, the PD200 has extremely compact dimensions - the size of the device could be reduced by more than 30%! These compact dimensions enable the transport of the PD200 e.g. through so-called safety ladders to the corresponding flat roof.The impulse current measuring system easily wins the weight comparison with its previous model. Although the single components partially are pretty heavy (e.g. the transformer), the total weight could be reduced by about 20% (from 11.2 kg to 8.6 kg). On top of the housing there are clearly visible signal lamps - one standard impulse signal (green) and one short-circuit signal (red), incl. integrated tone generator. Detected fluid:water Other characteristics:with visual alarm Applications:for flat roofs

The OPTIBAR DP 7060 is a differential pressure transmitter with integrated absolute pressure measurement. It offers a high degree of modularity for various flow, hydrostatic level or process pressure applications. For DP flow measurements it can be perfectly combined with the KROHNE primary elements (e.g. orifice plates or pitot tubes). Featuring a quick response time of just 125 ms, the DP transmitter offers high accuracy and measurement stability under all process conditions. KROHNE is the only manufacturer of process instrumentation to carry out a total 3D linearization of its differential pressure transmitter. For a robust and accurate differential pressure measurement, even under changing process conditions, each OPTIBAR DP 7060 differential pressure transmitter is linearized in all three dimensions during calibration: differential pressure, ambient temperature and static pressure are taken into account in combination. Pressure type::differential; vacuum Technology::Piezoresistive; ceramic Output signal::analog Measuring range::30 mbar…16bar / 0.44…232 psi; Line pressure: up to 160 bar / 2320.1 psi

M02, a compact yet powerful panel-mounted weighing indicator designed to meet all basic weighing needs, whose reliability and digital filtering show the ability to perform under interference in industrial environments. There are over 100,000 products in use with negligible repair rates. With high reliability, accuracy and response speed, M02 is customized for dynamic weighing systems.

Pour machines de précision avec des exigences de surface extrêmement élevées.

Stout, easy to install, highly protected against environmental agents: ELAP wire encoders series HLS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 12 metres. The encoder HLS is available with strokes ranging from 1000 to 12000 mm, and resolutions ranging from 0.04 to 1 mm, push-pull or line driver output signal. The types HLS-S, HLS-M and HLS-L differ for mechanical size and measuring stroke. Series HLS-S: 1000 mm – Resolution mm: 0.04 – 0.1 – 0.2 – 0.5 – 1 Series HLS-M: 1000, 2000, 3000, 4000, 5000 – Resolution mm: 0.05 – 0.1 – 0.2 – 0.5 -1 Series HLS-L: 6000, 7000, 8000, 9000,10000, 11000, 12000 mm – Resolution mm: 0.5 – 1 Output signals:push-pull, line-driver Zero reference pulse :1 for each encoder revolution Strokes:1000 mm to 12000 mm

vízmérők, félszerelvények, tömítések, vízóra szűkítések és hosszabbítások

Beschreibung Industrieller Beschleunigungsmesser (4-20 mA) Die RECOVIB® Industrie-Beschleunigungssensoren schließen die Lücke zwischen der Leistungsfähigkeit von Labor-Beschleunigungssensoren (die oft teuer, zerbrechlich und schwach geschützt sind) und der Robustheit von Industrie-Beschleunigungssensoren (die manchmal billiger, aber oft geräuschvoll und ungenau sind). Unsere Beschleunigungsmesser können in industriellen Umgebungen zur Überwachung von Maschinen oder Strukturen eingesetzt werden. Die RECOVIB®-Beschleunigungsaufnehmer sind von bewährter Konstruktion, und die meisten der verfügbaren Modelle werden in einer Vielzahl von Bereichen eingesetzt, wie z.B. Werkzeugmaschinen, Präzisionsbearbeitung und On- und Offshore-Windenergiesektoren zur Überwachung oder aktiven Schwingungskontrolle

This tablet comes with a preinstalled application that allows for ontheground checks of critical seaming parameters and keeps a record of previous measurements. As a tablet, it also has many features that may be useful at the time of inspection (camera, integrated email, etc.)

Jeu radial de l’axe de rotation < 0,015 mm, jeu axial de l’axe de rotation < 0,02 mm, Répétabilité < 0,05°. Vis autobloquante. Plage de réglage 360°, sans butée de fin de course. L'indicateur de position compte en pas de 0,1° dans le sens des aiguilles d'une montre. L'angle de rotation est affiché directement sur le grand écran LCD. La table circulaire se déplace dans le sens inverse des aiguilles d'une montre. Les fonctions reset, dimension incrémentale et offset sont accessibles depuis le clavier. La durée de vie de la batterie est de 2 ans. La batterie peut être remplacée rapidement et facilement. L'indicateur de position peut être monté dans 4 positions au moyen d'une vis. Ratio de transmission 211611008 = 501 211611012 = 551 211611025 = 501 Le principe de construction modulaire des tables circulaires permet de les combiner aisément avec les accessoires de la même catégorie. Référence:21161-10 Support de base et table circulaire:alliage d’aluminium anodisé Vis:acier Guidage:paliers lisses, sans entretien Indicateur de position:plastique

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

The EQP-200 Pellet Press has been especially designed to obtain high quality pellets/tablets for XRF. This press can exert a pressure of up to 40 tons. Of durable and robust design, it is very easy to manage, efficient, and offers 5 working programs with single and double pressing cycles. An exceptional instrument. Keeping all the features of its predecessor (EQP-100), the EQP-200 also offers the possibility of making pellets of different diameters, just by changing the pressing tool. This device facilitates also the cleaning and maintenance tasks. Its versatility enables the unit to work also with different shapes of press tools, such as square, rectangular, etc.

Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

Forniamo un'ampia gamma di manopole in diversi metalli. I nostri prodotti in acciaio possono essere spazzolati.

Areas of Usage: These Instrument cables, produced with high quality oxygen-free copper wires and specially blended PVC, have a high level of flexibility. They can be used confidently for the connections of microphones and professional audio systems in dynamic places such as studios and stages. PRODUCT CODE:FC134 CORE NUMBERS x SECTION:1x0,34mm² (AWG22) STRANDED COPPER CONDUCTER (Cu):11x0,20 mm Cu 1st INSULATION MATERIAL AND DIAMETER [mm]:PE 1,65±0.05 mm COPPER SHIELDING:100% COPPER SPIRAL SHIELDING OUTER SHEATH AND DIAMETER [mm ]:PVC 6,4±0.10 mm APPROXIMATE WEIGHT [kg/100m]:4.8 kg/100m CONDUCTOR RESISTANCE [Ω/km]:<84 Ω/km SHIELDING RESISTANCE [Ωxkm]:< 54 MΩ/km INSULATION RESISTANCE [MΩxkm]:>1000 MΩxkm CAPACITANCE (pF/m) core/core core/screen [pF]:85 pF/m WORKING TEMPARATURE:-20°C to +70°C BENDING RADIUS:10x diameter