Produkty dla instrumenty (3693)

Tastatori di misura incrementali con principio di rilevamento magnetico per un'elevata affidabilità con USB. Accuratezza e ripetibilità molto elevate Estremamente insensibile alla contaminazione come nebbia d'olio, umidità e polvere Cuscinetti a sfera per una lunga durata di servizio Perfettamente adatto per l'acquisizione automatica di misure in dispositivi di misura, linee di assemblaggio e di produzione. Campo die misura:5mm o 12mm o 30mm Accuratezza:da 1µm a 1,5µm (p-p) a seconda del modello Risoluzione:0,1µm o 0,5µm Marchio di riferimento:1 Velocità massima di risposta:80m/min Interfaccia:USB 2.0 Attuazione del pistone:A molla o a spinta pneumatica

Non-sterile 1000 cc surgical bowl (gallipot) for general use in operations. code:M11110501 Net Weight (grs):40 Package Dimensions:47 cm x 47 cm x 31 cm Package Quantity:220 Package Weight (kgs):9,60 Colour:Blue / White / Transparent or any requested color

The mains-driven panel meter RM-32 provides a continuous and precise measurement of irradiance with preamplified UV sensors. The integrated electronics produce a signal voltage that is transmitted to the radiometer, so that inferences are minimized. Different UV and visible spectral ranges, measuring ranges, and output signals can be selected to match the measurement task. The current irradiance is shown on a 3.5-digit digital display. The lamp state with respect to two threshold values is indicated by LEDs. Two relay contacts can be used for switching warning and failure signals. With its optional USB, RS232 or RS485 interface the RM-32 can be used to monitor ultraviolet (UV) irradiance. Control of light sources and irradiation systems Precise measurement of irradiances UV monitor for process control and documentation Dimensions:DIN 43700 96 x 48 mm Depth:~ 115 mm Weight:410 g Mains:230 V, 50 Hz, 3 W Operating temperature:0 to 40 °C

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

The Cairsens© NH3 micro-sensor allows specific pollutant measurement comparable to reference methods. Measured Parameter:NH3 Measuring Range (ppm):0 – 25 Certified Detection Limit (ppm):0.5 Resolution (ppm):0.001 Operating Temperature (°C):-20 to 40

The pressure transmitters of the 7LHPD series for high pressure applications use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Pressure Ranges:0…400 to 0…1000 bar Accuracy:±0,15 %FS Total Error Band:±1,0 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 15 mm x 8 mm Intrinsic safety:Series 7LDEi

RPWORLD offers sheet metal fabrication and pre-assemblies services as the complementary of our one-stop manufacturing service. The core benefits of this process include one-stop service, wide materials selection, hardware inserts, and our extensive experience in applications. - Wide Material Selection Aluminum, brass, copper, steel, tin, nickel and titanium. For decorative uses, important sheet metals include silver, gold, and platinum. - Hardware Inserts Choose from hundreds of in-house hardware inserts specifically designed for sheet metal fabrication. - One-stop Service Maintain consistent part quality and guaranteed lead times under our one-stop service. - Rich Experience for Various Applications Auto parts, medical devices, home appliances, robotics, scientific instruments etc. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design Industries Applied:Medical Device Industries Applied:Scientific Instrument

Clous pour ostéosynthèse standard et sur mesure vendus stériles et non stériles. Conception, fabrication et négoce d’implants orthopédiques mais aussi de divers matériels chirurgicaux. Pour mieux répondre aux besoins de notre clientèle, nous étudions toute demande concernant des produits spécifiques.

Spray bottles with pump vapouriser and safety cap for the pump. Liquids can be finely vapourised at the push of a button in an environmentally compatible way. The transparent bottles make identification of contents easy. The protective cover prevents unintentional pressing of the pump and acts as a dust cover. Material bottle:HDPE Material spray pump:PP and stainless steel

The pressure transmitter DMK 458 has been developed for marine and offshore applications. In addition to thread connections, different flush versions are available, which are especially suitable for pasty, viscous, and polluted media. Due to the capacitive ceramic sensor developed by BD\SENSORS, which is optionally available in Al2O3 99.9 %, the DMK 458 shows an outstanding accuracy as well as a high overload and temperature resistance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.25 % (opt. 0.1 %) FSO — shipping approvals: American Bureau of Shipping (ABS), Bureau Veritas (BV), China Classification Society (CCS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Lloyd's Register (LR) — high overpressure resistance — excellent accuracy — accuracy: 0.25 % (opt. 0.1 %) FSO Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — diaphragm AI2O3 99.9 %

Versione ad un solo canale o multicanale per l'estensimetro, il potenziometro, i segnali di norma, Pt100 e TC CARATTERISTICHE Per forza, misure di coppia di torsione o di pressione facendo uso dei sensori dell'estensimetro Per la misura di angolo o di posizione facendo uso dei sensori di DC/DC o potenziometrici Per la misura di temperatura facendo uso dei sensori o delle termocoppie della pinta 100 Modello multicanale facoltativo PROFIBUS facoltativo o interfaccia seriale accuratezza di misura di 0.1% più linearizzazione sensore-specifica Immagine delle funzioni matematiche (per esempio misura differenziale) Risposte di OK/NOK sul multi schermo a colori e via 4 uscite di limite dell'allarme Alta frequenza di campionamento (500/sec.) Grandezza fisica:di processo Tipo di quadrante:digitale Tipo:da montare su pannello Altre caratteristiche:multivia Applicazioni:per sonda Pt100, per anemometro Più applicazioni:ponti estensimetrici, potenziometro

Czujnik kontroli poziomu PanCake® PR 6251 jest specjalnie zaprojektowany do ważenia silosów i zbiorników. Spełnia wszystkie wymogi niezbędne do wieloletniej bezawaryjnej pracy bez potrzeby regulacji. Do użytku w strefach EX 1, 2, 20, 21, 22 i DIV 1. Ultrapłaski czujnik PanCake® może być stosowany do niskoprecyzyjnego ważenia zbiorników i jest alternatywą dla czujników poziomu. Zakres nośności czujnika od 500 kg do 16 t. Klasa dokładności: L (0,5%) Odpowiedni zestaw montażowy: PR 6051

Knight Optical can supply you with a custom made Diamond turned aspheric lenses for use within Thermal Imaging Cameras. We supply a range of diamond turned aspherics for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Thermal Imaging Cameras work similarly to traditional visible camera systems; while traditional cameras form images using visible light; thermal cameras form images using infrared radiation; operating in wavelengths as long as 14µm. Spherical aberration occurs in common singlet lenses, which results in an image that appears distorted, aspheric lenses correct spherical aberration. An aspheric lens surface is designed non-spherical, which allows a single component lens to collimate or focus highly divergent rays, Read PDF for more information… Material::Germanium, ZnSe, Caf2, Silicon, Zinc Selenide (For LWIR) Diameter::Up to 200mm dia +0, -0.02mm Thickness::+/- 0.2mm Flatness::< 1/2 wave over 90% aperture Surface Quality::< 40-20 scratch/dig Parallelism::5 arcmin Coating::AR/DLC (3-5 micron, 7-14 micron, 10-12 micron)

General purpose, high rotating speed, noncontact rotary torque sensors with square or round shaft. o Bidirectional o Maintenance free o Round or square shafts (see drawing) o Measurement range up to 100 N·m o Max. rotating speed Square shaft 5 000 rpm Round shaft 10 000 rpm o Integrated signal conditioning o Analogue output signal (see Wiring table) Reference:62300 Cable length:5 m (other lengths available on request) Combined error (non-linearity + hysteresis) (% F.S.*):<± 0.5 Repeatability error (% F.S.*):<± 0.05 Rotational signal uniformity (% F.S.*):<± 0.5 Compensated temperature range (°C):+15...+35 Service temperature range (°C):-30 ... +85 Storage temperature range (°C):-30 ... +85 Temperature coefficient of the sensitivity (% F.S.*/10°C):< 0.1 Temperature coefficient of zero signal (% F.S.*/10°C):< 0.1 Zero signal (V):5 Safe load limit (% F.S.*):130 Power supply (-):5...28 VDC Consumption (max.) (mA):37...45 Nominal sensitivity (V):± 4 Start-up current (mA):< 100 IP rating (-):IP50

Passively Q-switched 213 nm laser with 1.5 µJ and max. rep rate of 2.5 kHz - The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q3 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 2.5 kHz. The pulse energy is 1.5 µJ at 1 kHz. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups. Wavelength:213 nm Pulse energy:1.5 µJ Peakpower:1.5 kW Pulse Width:1 ns Average Power:1.5 mW Repetition Rate:2.5 kHz Beam diameter:< 0.45 mm Spatial Mode:TEM00 Application:Holography, engraving, photo acoustics, LIBS, mass spectroscopy, photo luminescence

SISTEMA DI MISURAZIONE CON CORRENTE A IMPULSI PD200 Set completo in pratica versione con valigetta da trasporto, per la localizzazione esatta delle perdite nei sistemi con tele di impermeabilizzazione e oggetti rivestiti con lamine. Impulsivo quanto efficace – la localizzazione veloce delle perdite diventa un gioco da ragazzi Il sistema di misurazione con corrente a impulsi PD200 è la soluzione ottimale per la precisa localizzazione di mancanza di tenuta nella messa a terra in sistemi di impermeabilizzazione non conducenti – per esempio su tele di bitume, di elastomero, die PE-HD o di altre plastiche. Le misure e il peso del PD200 sono state ancora ridotte in modo significativo rispetto al suo modello precedente. Per questo, il PD200 non solo è più leggero del 20 %, ma richiede il 30 % di spazio in meno, anche se serve ancora come contenitore recettore per i completi accessori PD200! Fluido rilevato:d'acqua Altre caratteristiche:con allarme visivo Applicazioni:per coperture piatte

Réalisation de profils thermiques dans le domaine des cellules photovoltaïques solaires Processus de revêtement antireflet (pulvérisation) Métallisation par contact Séchage par contact Processus de lamination Plage de températures (enregistreur de données DQ1863):-200°C à 1370°C Nombre de canaux:6 Mémoire:18 000 entrées par canal (6 canaux actifs) Précision:±0,5 ºC Résolution:0,1 ºC Thermocouples:Type K Pile:NiMH rechargeable Début de la collecte de donnée:Boutons de démarrage et d’arrêt ou déclenchement selon l’heure ou la température Bouclier Thermique TB7400 (Dimensions (H x I x L):18 mm x 149 mm x 148 mm

Transmetteur de niveau radar (FMCW) pour liquides agités et corrosifs L'OPTIWAVE 7400 est un transmetteur de niveau radar (FMCW) 24 GHz pour liquides dans des environnements difficiles tels que les réservoirs avec agitateurs contenant des produits corrosifs. Il a été spécialement conçu pour réaliser des mesures de niveau sans contact en continu dans des conditions extrêmes en chimie, pétrochimie ou pétrole & gaz. Le transmetteur de niveau est disponible avec une antenne conique métallique et une antenne Drop PTFE et PEEK ; il mesure des distances allant jusqu'à 100 m / 328 ft. Les antennes Drop conviennent parfaitement pour les liquides agressifs dans les réservoirs. Ce niveau radar dispose d'une double barrière d'étanchéité Metaglas® pour les produits toxiques et dangereux. Fluide::de liquide Technologie::radar FMCW Affichage::numérique Plage de mesure::0…100 m / 328 ft Température::Jusqu'à +200°C I +392°F Pression::100 barg / 1450 psig (autre sur demande)

Magtrol's new PSD hand-held indicator is a stand-alone unit powered by 3 AA batteries or via USB. It is very compact (~160 x 80 x 50 mm) and can be easily carried and used on a civil engineering site, in a research & development office or laboratory as well as in production shop. Its case is ergonomic, waterproof (IP54) and protected by a rubber shock absorber. It is suitable to any type of strain gauge transducers, being a load cell, a load pin or a reaction torque sensor. The internal amplifier can process signal range of ±0.3 ... 5 mV/V. The new PSD Portable Display is very flexible and complies with the highest specification in terms of accuracy (0.01%) and measurement frequency (1600/s). It allows to store up to 16 programmable measurement ranges which can be configured either directly on the unit or via its USB interface and dedicated software (included). Multiple force or torque transducers can be connected for which actual data as well as the ... read more: www.magtrol. Accuracy:0.01% Measuring Rate: up to 1600 values per second Character Height:14mm

Wire transducers series WDS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and strokes ranging from 3000 to 15000 mm. The housing is out of aluminium, whilst the wire consists of coated poliamide stainless steel. Strokes range:3 to 15 metres Housing:Alumiun Wire: Coated poliamide stainless steel Available interface:EtherNet/IP, EtherCAT, Profinet, Profibus, CANopen, SSI

This remote display is an outdoor truck scale remote display of the highest quality with a full stainless steel body with IP65 standard, which is the world"s first ultra-light LED display that has a viewing angle of 170 degrees and is crystal clear directly under sunlight. The remote display offers unmatched flexibility with its smart data recognition system compatible with indicators from major international indicator brands.

La Trituradora de Mandíbulas EQJ-100 es un equipo de triturado especialmente diseñado para la reducción primaria de materiales semiduros, duros, frágiles y tenaces. Es capaz de triturar rápida y contundentemente vidrios, tierras, escorias, óxidos metálicos, cementos y materiales de construcción, ferroaleaciones, materiales cerámicos, minerales y rocas. Es un equipo muy robusto y sencillo, capaz de engullir y reducir muestras durante años prácticamente sin requerir mantenimiento. Reducción instantánea de muestras. Rango de trituración regulable.

Accessoires pour machines.

Bullseye level body stainless steel up to Ø14 mm, then aluminium. Sight window glass. Version Aluminium black anodised. Note Bubble levels are used as a type of zero indicator instrument for checking horizontal inclination in e.g. spirit levels, inclinometers, metrology instruments and machine constructions. Excellent bubble contour, with internal bubble ring to eliminate planar parallaxes. Sensitivity in angular minutes for 2 mm bubble travel Clear filling Reference:21808 Temperature range:-35 °C up to +55 °C

The digital dynamometer for beverage cans is used to simply but precisely measure the pressure of every single lower lifters during the adjustment of the seaming machine. The main feature of this instrument is its practicality of measurement and major ease of reading compared to the standard digital one, as it is equipped with a cable that allows readings of parameters reaching every area of the machine.

The NARVA 67273 is a high-precision, conventional special lamp produced in Germany by the lamp manufacturer vosla GmbH. It is representative of a selection of light bulbs for medical and analytical equipment. NARVA lamps meet the strictest quality criteria in the medical sector. This means that they can be used in operating theaters, medical equipment and diagnostics. Voltage [V]:6 Wattage [W]:15 Base:Z16 Lifetime [h]:100 Application:Medical and Laboratory Equipment, Optical Analysis

The He-490S is the leader among portable tracer gas leak detectors. With a response time less than 0.5 seconds, sensitivity to 10-8 direct reading atm-cc/sec, and the ability to zero-out background, this is the most aggressive portable leak detector in the industry, with advanced features designed specifically for industrial applications. The He-490S can be integrated with our Smart Charge 5 evacuation and backfill station. Fastest response time in the industry (less than 0.5 seconds) Helium background suppression Maintenance free, dry pump Sensitivity to 5 x 10-8 atm cc/sec Less than 3 minutes total start-up time Fully automatic calibration sequence with built-in 10-5 atm cc/sec gas leak Front panel key lock-out Sealed membrane keypad Fully interactive system diagnostics with multilingual displays High output (110dB) adjustable audio alarm Sensitivity: Smallest detectable helium leak rate 5 x 10-8 atm cc/sec Measuring Scale: 7 decades Weight:70 lbs / 31.8 kg Dimensions:(WxHxD) 344 x 395 x 618 mm / 13.5″ x 15.5″ x 24.4″ Operating:32F to 115F / + 0°C to + 46°C Storage:32F to 140F / + 0°C to + 60°C

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained. Country of origin:Germany Inline Inspection: :100% Laser wavelength:blue 405nm or 450 nm, red 650 nm

These interconnection cables, produced with high quality oxygen-free copper wires and specially blended PVC, have a high level of flexibility and they can be used safely in the interconnections of sound, music and professional sound systems in dynamic places such as studios and stages.

watermeters, halve fittingen, afdichtingen, watermeterreducties en -verlengingen